From: Ingo Molnar <mingo@elte.hu>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org
Subject: [origin tree build failure] [PATCH] media: video: Fix build in saa7164
Date: Mon, 21 Sep 2009 20:23:45 +0200 [thread overview]
Message-ID: <20090921182345.GA25100@elte.hu> (raw)
In-Reply-To: <20090919014930.7dd90f77@pedra.chehab.org>
* Mauro Carvalho Chehab <mchehab@redhat.com> wrote:
> This series also contains several new drivers:
>
> - new driver for NXP saa7164;
-tip testing found that an allyesconfig build buglet found its way into
this driver - find the fix below.
Thanks,
Ingo
--------------------->
>From 67a0d8c7dfdf2de72ddec3d821ae87a80ecaed83 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 21 Sep 2009 20:14:47 +0200
Subject: [PATCH] media: video: Fix build in saa7164
-tip testing found that the x86 build (64-bit allyesconfig) fails due to:
LD vmlinux.o
drivers/built-in.o:(.bss+0x4b648): multiple definition of `debug'
arch/x86/built-in.o:(.kprobes.text+0x88): first defined here
ld: Warning: size of symbol `debug' changed from 90 in arch/x86/built-in.o to 4 in drivers/built-in.o
make: *** [vmlinux.o] Error 1
This is because recent saa7164 changes introduced a global symbol
named 'debug'. The x86 platform code already defines a 'debug'
symbol. (which is named in a too generic way as well - but it
can be used nicely to weed out too generic symbols in drivers ;-)
Rename it to saa_debug.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
drivers/media/video/saa7164/saa7164-api.c | 8 ++++----
drivers/media/video/saa7164/saa7164-cmd.c | 2 +-
drivers/media/video/saa7164/saa7164-core.c | 6 +++---
drivers/media/video/saa7164/saa7164.h | 4 ++--
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c
index bb6df1b..6f094a9 100644
--- a/drivers/media/video/saa7164/saa7164-api.c
+++ b/drivers/media/video/saa7164/saa7164-api.c
@@ -415,7 +415,7 @@ int saa7164_api_enum_subdevs(struct saa7164_dev *dev)
goto out;
}
- if (debug & DBGLVL_API)
+ if (saa_debug & DBGLVL_API)
saa7164_dumphex16(dev, buf, (buflen/16)*16);
saa7164_api_dump_subdevs(dev, buf, buflen);
@@ -480,7 +480,7 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, 2 * 16);
ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
@@ -488,7 +488,7 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
if (ret != SAA_OK)
printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
else {
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
}
@@ -548,7 +548,7 @@ int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen,
*((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen;
memcpy((buf + 2 * sizeof(u32)), data, datalen);
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,
diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index e097f1a..c45966e 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -250,7 +250,7 @@ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
unsigned long stamp;
int r;
- if (debug >= 4)
+ if (saa_debug >= 4)
saa7164_bus_dump(dev);
dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index f0dbead..60f3214 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -45,8 +45,8 @@ MODULE_LICENSE("GPL");
32 bus
*/
-unsigned int debug;
-module_param(debug, int, 0644);
+unsigned int saa_debug;
+module_param(saa_debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
unsigned int waitsecs = 10;
@@ -653,7 +653,7 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
printk(KERN_ERR "%s() Unsupported board detected, "
"registering without firmware\n", __func__);
- dprintk(1, "%s() parameter debug = %d\n", __func__, debug);
+ dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
fail_fw:
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 6753008..42660b5 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -375,9 +375,9 @@ extern int saa7164_buffer_dealloc(struct saa7164_tsport *port,
/* ----------------------------------------------------------- */
-extern unsigned int debug;
+extern unsigned int saa_debug;
#define dprintk(level, fmt, arg...)\
- do { if (debug & level)\
+ do { if (saa_debug & level)\
printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
} while (0)
next prev parent reply other threads:[~2009-09-21 18:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-19 4:49 [GIT PATCHES for 2.6.31] V4L/DVB updates Mauro Carvalho Chehab
2009-09-21 11:05 ` Mauro Carvalho Chehab
2009-09-21 18:23 ` Ingo Molnar [this message]
2009-09-21 23:57 ` [origin tree build failure] [PATCH] media: video: Fix build in saa7164 Mauro Carvalho Chehab
2009-09-22 7:53 ` Ingo Molnar
2009-09-22 8:01 ` [origin tree build failure] drivers/built-in.o:(.data+0xb1f40): undefined reference to `dib0070_ctrl_agc_filter' Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090921182345.GA25100@elte.hu \
--to=mingo@elte.hu \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.