[PATCH 3/8] Staging: rt3090: remove private debugging ioctls

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt3090: remove private debugging ioctls

This makes rt3090 match other Ralink drivers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt3090/oid.h       |   12 
 drivers/staging/rt3090/sta_ioctl.c |  799 -------------------------------------
 2 files changed, 811 deletions(-)

Index: b/drivers/staging/rt3090/oid.h
===================================================================
--- a/drivers/staging/rt3090/oid.h
+++ b/drivers/staging/rt3090/oid.h
@@ -679,18 +679,6 @@ typedef struct _NDIS_802_11_CAPABILITY
 #define RT_PRIV_IOCTL							(SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
 #define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
 
-#ifdef DBG
-#define RTPRIV_IOCTL_BBP                            (SIOCIWFIRSTPRIV + 0x03)
-#define RTPRIV_IOCTL_MAC                            (SIOCIWFIRSTPRIV + 0x05)
-
-#ifdef RTMP_RF_RW_SUPPORT
-// TODO: shiang, Need to reassign the oid number. ArchTeam use (SIOCIWFIRSTPRIV + 0x19) for this oid
-#define RTPRIV_IOCTL_RF                             (SIOCIWFIRSTPRIV + 0x13)  // edit by johnli, fix read rf register problem
-#endif // RTMP_RF_RW_SUPPORT //
-
-#define RTPRIV_IOCTL_E2P                            (SIOCIWFIRSTPRIV + 0x07)
-#endif // DBG //
-
 #ifdef RALINK_ATE
 #ifdef RALINK_28xx_QA
 #define RTPRIV_IOCTL_ATE							(SIOCIWFIRSTPRIV + 0x08)
Index: b/drivers/staging/rt3090/sta_ioctl.c
===================================================================
--- a/drivers/staging/rt3090/sta_ioctl.c
+++ b/drivers/staging/rt3090/sta_ioctl.c
@@ -101,23 +101,6 @@ struct iw_priv_args privtab[] = {
 	  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
 /* --- sub-ioctls relations --- */
 
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "bbp"},
-{ RTPRIV_IOCTL_MAC,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "mac"},
-#ifdef RTMP_RF_RW_SUPPORT
-{ RTPRIV_IOCTL_RF,
-  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
-  "rf"},
-#endif // RTMP_RF_RW_SUPPORT //
-{ RTPRIV_IOCTL_E2P,
-  IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
-  "e2p"},
-#endif  /* DBG */
-
 { RTPRIV_IOCTL_STATISTICS,
   0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
   "stat"},
@@ -204,18 +187,6 @@ INT Set_Wpa_Support(
 	IN	PSTRING			arg);
 #endif // WPA_SUPPLICANT_SUPPORT //
 
-#ifdef DBG
-
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq);
-
-VOID RTMPIoctlE2PROM(
-    IN  PRTMP_ADAPTER   pAdapter,
-    IN  struct iwreq    *wrq);
-#endif // DBG //
-
-
 NDIS_STATUS RTMPWPANoneAddKeyProc(
     IN  PRTMP_ADAPTER   pAd,
     IN	PVOID			pBuf);
@@ -2917,142 +2888,6 @@ int rt_ioctl_siwpmksa(struct net_device 
 }
 #endif // #if WIRELESS_EXT > 17
 
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
-		struct iw_point *wrq, char *extra)
-			{
-	PSTRING				this_char;
-	PSTRING				value = NULL;
-	UCHAR				regBBP = 0;
-//	CHAR				arg[255]={0};
-	UINT32				bbpId;
-	UINT32				bbpValue;
-	BOOLEAN				bIsPrintAllBBP = FALSE;
-	INT					Status = 0;
-    PRTMP_ADAPTER       pAdapter = RTMP_OS_NETDEV_GET_PRIV(dev);
-
-
-	memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
-	if (wrq->length > 1) //No parameters.
-				{
-		sprintf(extra, "\n");
-
-		//Parsing Read or Write
-		this_char = wrq->pointer;
-		DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
-			if (sscanf(this_char, "%d", &(bbpId)) == 1)
-			{
-				if (bbpId <= MAX_BBP_ID)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		else
-		{ //Write
-			if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
-			{
-				if (bbpId <= MAX_BBP_ID)
-				{
-#ifdef RALINK_ATE
-					if (ATE_ON(pAdapter))
-					{
-						ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-						/* read it back for showing */
-						ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					}
-					else
-#endif // RALINK_ATE //
-					{
-					    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
-					/* read it back for showing */
-					RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-					sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId, regBBP);
-                    wrq->length = strlen(extra) + 1; // 1: size of '\0'
-					DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllBBP = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all bbp
-				bIsPrintAllBBP = TRUE;
-				goto next;
-			}
-		}
-		}
-	else
-		bIsPrintAllBBP = TRUE;
-
-next:
-	if (bIsPrintAllBBP)
-	{
-		memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-		sprintf(extra, "\n");
-		for (bbpId = 0; bbpId <= MAX_BBP_ID; bbpId++)
-		{
-		    if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 20))
-                break;
-#ifdef RALINK_ATE
-			if (ATE_ON(pAdapter))
-			{
-				ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			}
-			else
-#endif // RALINK_ATE //
-			RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-			sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X    ", bbpId, bbpId, regBBP);
-			if (bbpId%5 == 4)
-			sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP);  // edit by johnli, change display format
-		}
-
-        wrq->length = strlen(extra) + 1; // 1: size of '\0'
-        DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
-    return Status;
-}
-#endif // DBG //
-
 int rt_ioctl_siwrate(struct net_device *dev,
 			struct iw_request_info *info,
 			union iwreq_data *wrqu, char *extra)
@@ -3246,11 +3081,7 @@ static const iw_handler rt_priv_handlers
 	(iw_handler) NULL, /* + 0x00 */
 	(iw_handler) NULL, /* + 0x01 */
 	(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#ifdef DBG
-	(iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
 	(iw_handler) NULL, /* + 0x03 */
-#endif
 	(iw_handler) NULL, /* + 0x04 */
 	(iw_handler) NULL, /* + 0x05 */
 	(iw_handler) NULL, /* + 0x06 */
@@ -5773,20 +5604,6 @@ INT rt28xx_sta_ioctl(
 		case RTPRIV_IOCTL_GSITESURVEY:
 			RTMPIoctlGetSiteSurvey(pAd, wrq);
 		    break;
-#ifdef DBG
-		case RTPRIV_IOCTL_MAC:
-			RTMPIoctlMAC(pAd, wrq);
-			break;
-		case RTPRIV_IOCTL_E2P:
-			RTMPIoctlE2PROM(pAd, wrq);
-			break;
-#ifdef RTMP_RF_RW_SUPPORT
-		case RTPRIV_IOCTL_RF:
-			RTMPIoctlRF(pAd, wrq);
-			break;
-#endif // RTMP_RF_RW_SUPPORT //
-#endif // DBG //
-
         case SIOCETHTOOL:
                 break;
 		default:
@@ -6700,622 +6517,6 @@ INT Set_Wpa_Support(
 }
 #endif // WPA_SUPPLICANT_SUPPORT //
 
-#ifdef DBG
-/*
-    ==========================================================================
-    Description:
-        Read / Write MAC
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 mac 0        ==> read MAC where Addr=0x0
-               2.) iwpriv ra0 mac 0=12     ==> write MAC where Addr=0x0, value=12
-    ==========================================================================
-*/
-VOID RTMPIoctlMAC(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	PSTRING				this_char;
-	PSTRING				value;
-	INT					j = 0, k = 0;
-	STRING				msg[1024];
-	STRING				arg[255];
-	ULONG				macAddr = 0;
-	UCHAR				temp[16];
-	STRING				temp2[16];
-	UINT32				macValue = 0;
-	INT					Status;
-	BOOLEAN				bIsPrintAllMAC = FALSE;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-		//Parsing Read or Write
-	    this_char = arg;
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// Mac Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-				if (macAddr < 0xFFFF)
-				{
-					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-					DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
-					sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr , macValue);
-				}
-				else
-				{//Invalid parametes, so default printk all mac
-					bIsPrintAllMAC = TRUE;
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[8-k+j] = temp2[j];
-			}
-
-			while(k < 8)
-				temp2[7-k++]='0';
-			temp2[8]='\0';
-
-			{
-				AtoH(this_char, temp, 2);
-				macAddr = *temp*256 + temp[1];
-
-				AtoH(temp2, temp, 4);
-				macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
-				// debug mode
-				if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
-				{
-					// 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
-                    if (macValue & 0x000000ff)
-                    {
-                        pAdapter->BbpTuning.bEnable = TRUE;
-                        DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
-                    }
-                    else
-                    {
-                        UCHAR R66;
-                        pAdapter->BbpTuning.bEnable = FALSE;
-                        R66 = 0x26 + GET_LNA_GAIN(pAdapter);
-#ifdef RALINK_ATE
-						if (ATE_ON(pAdapter))
-						{
-							ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-						}
-						else
-#endif // RALINK_ATE //
-
-							RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
-                        DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
-                    }
-					return;
-				}
-
-				DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
-				RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
-				sprintf(msg+strlen(msg), "[0x%08lX]:%08X  ", macAddr, macValue);
-			}
-		}
-	}
-	else
-		bIsPrintAllMAC = TRUE;
-next:
-	if (bIsPrintAllMAC)
-	{
-		struct file		*file_w;
-		PSTRING			fileName = "MacDump.txt";
-		mm_segment_t	orig_fs;
-
-		orig_fs = get_fs();
-		set_fs(KERNEL_DS);
-
-		// open file
-		file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
-		if (IS_ERR(file_w))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(file_w), fileName));
-		}
-		else
-		{
-			if (file_w->f_op && file_w->f_op->write)
-			{
-				file_w->f_pos = 0;
-				macAddr = 0x1000;
-
-				while (macAddr <= 0x1800)
-				{
-					RTMP_IO_READ32(pAdapter, macAddr, &macValue);
-					sprintf(msg, "%08lx = %08X\n", macAddr, macValue);
-
-					// write data to file
-					file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
-					printk("%s", msg);
-					macAddr += 4;
-				}
-				sprintf(msg, "\nDump all MAC values to %s\n", fileName);
-			}
-			filp_close(file_w, NULL);
-		}
-		set_fs(orig_fs);
-	}
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
-    ==========================================================================
-    Description:
-        Read / Write E2PROM
-    Arguments:
-        pAdapter                    Pointer to our adapter
-        wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 e2p 0		==> read E2PROM where Addr=0x0
-               2.) iwpriv ra0 e2p 0=1234    ==> write E2PROM where Addr=0x0, value=1234
-    ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	PSTRING				this_char;
-	PSTRING				value;
-	INT					j = 0, k = 0;
-	STRING				msg[1024];
-	STRING				arg[255];
-	USHORT				eepAddr = 0;
-	UCHAR				temp[16];
-	STRING				temp2[16];
-	USHORT				eepValue;
-	int					Status;
-	BOOLEAN				bIsPrintAllE2P = FALSE;
-
-
-	memset(msg, 0x00, 1024);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-	    //Parsing Read or Write
-		this_char = arg;
-
-
-		if (!*this_char)
-			goto next;
-
-		if ((value = rtstrchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-
-			// Sanity check
-			if(strlen(this_char) > 4)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-
-			// E2PROM addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			if(strlen(this_char) == 4)
-			{
-				AtoH(this_char, temp, 2);
-				eepAddr = *temp*256 + temp[1];
-				if (eepAddr < 0xFFFF)
-				{
-					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-					sprintf(msg+strlen(msg), "[0x%04X]:0x%04X  ", eepAddr , eepValue);
-				}
-				else
-				{//Invalid parametes, so default printk all bbp
-					bIsPrintAllE2P = TRUE;
-					goto next;
-				}
-			}
-		}
-		else
-		{ //Write
-			memcpy(&temp2, value, strlen(value));
-			temp2[strlen(value)] = '\0';
-
-			// Sanity check
-			if((strlen(this_char) > 4) || strlen(temp2) > 8)
-				goto next;
-
-			j = strlen(this_char);
-			while(j-- > 0)
-			{
-				if(this_char[j] > 'f' || this_char[j] < '0')
-					return;
-			}
-			j = strlen(temp2);
-			while(j-- > 0)
-			{
-				if(temp2[j] > 'f' || temp2[j] < '0')
-					return;
-			}
-
-			//MAC Addr
-			k = j = strlen(this_char);
-			while(j-- > 0)
-			{
-				this_char[4-k+j] = this_char[j];
-			}
-
-			while(k < 4)
-				this_char[3-k++]='0';
-			this_char[4]='\0';
-
-			//MAC value
-			k = j = strlen(temp2);
-			while(j-- > 0)
-			{
-				temp2[4-k+j] = temp2[j];
-			}
-
-			while(k < 4)
-				temp2[3-k++]='0';
-			temp2[4]='\0';
-
-			AtoH(this_char, temp, 2);
-			eepAddr = *temp*256 + temp[1];
-
-			AtoH(temp2, temp, 2);
-			eepValue = *temp*256 + temp[1];
-
-			RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
-			sprintf(msg+strlen(msg), "[0x%02X]:%02X  ", eepAddr, eepValue);
-		}
-	}
-	else
-		bIsPrintAllE2P = TRUE;
-next:
-	if (bIsPrintAllE2P)
-	{
-		struct file		*file_w;
-		PSTRING			fileName = "EEPROMDump.txt";
-		mm_segment_t	orig_fs;
-
-		orig_fs = get_fs();
-		set_fs(KERNEL_DS);
-
-		// open file
-		file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
-		if (IS_ERR(file_w))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(file_w), fileName));
-		}
-		else
-		{
-			if (file_w->f_op && file_w->f_op->write)
-			{
-				file_w->f_pos = 0;
-				eepAddr = 0x00;
-
-				while (eepAddr <= 0xFE)
-				{
-					RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
-					sprintf(msg, "%08x = %04x\n", eepAddr , eepValue);
-
-					// write data to file
-					file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
-					printk("%s", msg);
-					eepAddr += 2;
-				}
-				sprintf(msg, "\nDump all EEPROM values to %s\n", fileName);
-			}
-			filp_close(file_w, NULL);
-		}
-		set_fs(orig_fs);
-	}
-	if(strlen(msg) == 1)
-		sprintf(msg+strlen(msg), "===>Error command format!");
-
-
-	// Copy the information into the user buffer
-	wrq->u.data.length = strlen(msg);
-	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-
-
-#ifdef RT30xx
-/*
-    ==========================================================================
-    Description:
-        Read / Write RF register
-Arguments:
-    pAdapter                    Pointer to our adapter
-    wrq                         Pointer to the ioctl argument
-
-    Return Value:
-        None
-
-    Note:
-        Usage:
-               1.) iwpriv ra0 rf                ==> read all RF registers
-               2.) iwpriv ra0 rf 1              ==> read RF where RegID=1
-               3.) iwpriv ra0 rf 1=10		    ==> write RF R1=0x10
-    ==========================================================================
-*/
-VOID RTMPIoctlRF(
-	IN	PRTMP_ADAPTER	pAdapter,
-	IN	struct iwreq	*wrq)
-{
-	CHAR				*this_char;
-	CHAR				*value;
-	UCHAR				regRF = 0;
-	STRING				msg[2048];
-	CHAR				arg[255];
-	INT					rfId;
-	LONG				rfValue;
-	int					Status;
-	BOOLEAN				bIsPrintAllRF = FALSE;
-
-
-	memset(msg, 0x00, 2048);
-	if (wrq->u.data.length > 1) //No parameters.
-	{
-	    Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
-		sprintf(msg, "\n");
-
-	    //Parsing Read or Write
-		this_char = arg;
-		if (!*this_char)
-			goto next;
-
-		if ((value = strchr(this_char, '=')) != NULL)
-			*value++ = 0;
-
-		if (!value || !*value)
-		{ //Read
-			if (sscanf((PSTRING) this_char, "%d", &(rfId)) == 1)
-			{
-				if (rfId <= 31)
-				{
-#ifdef RALINK_ATE
-					/*
-						In RT2860 ATE mode, we do not load 8051 firmware.
-	                    We must access RF directly.
-						For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
-					*/
-					if (ATE_ON(pAdapter))
-					{
-						ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-					}
-					else
-#endif // RALINK_ATE //
-					// according to Andy, Gary, David require.
-					// the command rf shall read rf register directly for dubug.
-					// BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-					RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-
-					sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X  ", rfId, rfId, regRF);
-				}
-				else
-				{//Invalid parametes, so default printk all RF
-					bIsPrintAllRF = TRUE;
-					goto next;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all RF
-				bIsPrintAllRF = TRUE;
-				goto next;
-			}
-		}
-		else
-		{ //Write
-			if ((sscanf((PSTRING) this_char, "%d", &(rfId)) == 1) && (sscanf((PSTRING) value, "%lx", &(rfValue)) == 1))
-			{
-				if (rfId <= 31)
-				{
-#ifdef RALINK_ATE
-						/*
-							In RT2860 ATE mode, we do not load 8051 firmware.
-		                    We must access RF directly.
-							For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
-						*/
-						if (ATE_ON(pAdapter))
-						{
-							ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-							ATE_RF_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
-							//Read it back for showing
-							ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-							sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId, regRF);
-						}
-						else
-#endif // RALINK_ATE //
-						{
-							// according to Andy, Gary, David require.
-							// the command RF shall read/write RF register directly for dubug.
-							//BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-							//BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue);
-							RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-							RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
-							//Read it back for showing
-							//BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, &regBBP);
-							RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-			                sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId, regRF);
-				                }
-				}
-				else
-				{//Invalid parametes, so default printk all RF
-					bIsPrintAllRF = TRUE;
-				}
-			}
-			else
-			{ //Invalid parametes, so default printk all RF
-				bIsPrintAllRF = TRUE;
-			}
-		}
-	}
-	else
-		bIsPrintAllRF = TRUE;
-next:
-	if (bIsPrintAllRF)
-	{
-		memset(msg, 0x00, 2048);
-		sprintf(msg, "\n");
-		for (rfId = 0; rfId <= 31; rfId++)
-		{
-#ifdef RALINK_ATE
-			/*
-				In RT2860 ATE mode, we do not load 8051 firmware.
-                We must access RF directly.
-				For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
-			*/
-			if (ATE_ON(pAdapter))
-			{
-				ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, &regRF);
-			}
-			else
-#endif // RALINK_ATE //
-
-			// according to Andy, Gary, David require.
-			// the command RF shall read/write RF register directly for dubug.
-			RT30xxReadRFRegister(pAdapter, rfId, &regRF);
-			sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF);
-		}
-		// Copy the information into the user buffer
-		DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg)));
-		wrq->u.data.length = strlen(msg);
-		if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __FUNCTION__));
-		}
-	}
-	else
-	{
-		if(strlen(msg) == 1)
-			sprintf(msg+strlen(msg), "===>Error command format!");
-
-		DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg));
-		// Copy the information into the user buffer
-		DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg)));
-
-		// Copy the information into the user buffer
-		wrq->u.data.length = strlen(msg);
-		Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n"));
-}
-#endif // RT30xx //
-#endif // DBG //
-
-
-
-
 INT Set_TGnWifiTest_Proc(
     IN  PRTMP_ADAPTER   pAd,
     IN  PSTRING          arg)