From: Anton Vorontsov <cbouatmailru@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: avorontsov@ru.mvista.com, torvalds@linux-foundation.org,
ben@fluff.org, benh@kernel.crashing.org, david.vrabel@csr.com,
galak@kernel.crashing.org, linux-mmc@vger.kernel.org,
pierre@ossman.eu, s.hauer@pengutronix.de
Subject: Re: [patch 084/232] powerpc/85xx: add eSDHC support for MPC8536DS boards
Date: Wed, 23 Sep 2009 05:16:50 +0400 [thread overview]
Message-ID: <20090923011650.GA26325@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090922175657.ae347784.akpm@linux-foundation.org>
On Tue, Sep 22, 2009 at 05:56:57PM -0700, Andrew Morton wrote:
> On Wed, 23 Sep 2009 04:32:00 +0400 Anton Vorontsov <cbouatmailru@gmail.com> wrote:
>
> > On Tue, Sep 22, 2009 at 04:45:17PM -0700, akpm@linux-foundation.org wrote:
> > > From: Anton Vorontsov <avorontsov@ru.mvista.com>
> > >
> > > This patch simply adds sdhci node to the device tree.
> > >
> > > We specify clock-frequency manually, so that eSDHC will work without
> > > upgrading U-Boot. Though, that'll only work for default setup (1500 MHz)
> > > on new board revisions. For non-default setups, it's recommended to
> > > upgrade U-Boot, since it will fixup clock-frequency automatically.
> > >
> > > Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> > > Cc: Pierre Ossman <pierre@ossman.eu>
> > > Cc: Kumar Gala <galak@kernel.crashing.org>
> > > Cc: David Vrabel <david.vrabel@csr.com>
> > > Cc: Ben Dooks <ben@fluff.org>
> > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > > Cc: <linux-mmc@vger.kernel.org>
> > > Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> > > ---
> > >
> > > arch/powerpc/boot/dts/mpc8536ds.dts | 8 ++++++++
> > > 1 file changed, 8 insertions(+)
> > >
> > > diff -puN arch/powerpc/boot/dts/mpc8536ds.dts~powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards arch/powerpc/boot/dts/mpc8536ds.dts
> > > --- a/arch/powerpc/boot/dts/mpc8536ds.dts~powerpc-85xx-add-esdhc-support-for-mpc8536ds-boards
> > > +++ a/arch/powerpc/boot/dts/mpc8536ds.dts
> > > @@ -258,6 +258,14 @@
> > > clock-frequency = <250000000>;
> > > };
> >
> > By "clock-frequency = <250000000>;" above and the one down below*
> > I can see that this patch is already applied (via powerpc tree).
> >
> > Please don't merge this particular patch, it's already there.
> >
> > > + sdhci@2e000 {
> > > + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
> > > + reg = <0x2e000 0x1000>;
> > > + interrupts = <72 0x2>;
> > > + interrupt-parent = <&mpic>;
> > > + clock-frequency = <250000000>;
> >
> > *
> >
> > > + };
> > > +
> > > serial0: serial@4500 {
> > > cell-index = <0>;
> > > device_type = "serial";
> > > _
>
> So someone went and stole [patch 7/7] from your series and didn't tell me?
Kumar told that he applied it to his next tree, you were Cc'ed.
http://lkml.org/lkml/2009/8/25/235
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
prev parent reply other threads:[~2009-09-23 1:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-22 23:45 [patch 084/232] powerpc/85xx: add eSDHC support for MPC8536DS boards akpm
2009-09-23 0:32 ` Anton Vorontsov
2009-09-23 0:56 ` Andrew Morton
2009-09-23 1:16 ` Anton Vorontsov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090923011650.GA26325@oksana.dev.rtsoft.ru \
--to=cbouatmailru@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=avorontsov@ru.mvista.com \
--cc=ben@fluff.org \
--cc=benh@kernel.crashing.org \
--cc=david.vrabel@csr.com \
--cc=galak@kernel.crashing.org \
--cc=linux-mmc@vger.kernel.org \
--cc=pierre@ossman.eu \
--cc=s.hauer@pengutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.