From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Kashyap, Desai" Subject: [PATCH 17/20] mpt2sas: Freeze the sdev IO queue when firmware sends internal dev reset Date: Wed, 23 Sep 2009 17:35:41 +0530 Message-ID: <20090923120541.GV6772@lsi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from na3sys009aog114.obsmtp.com ([74.125.149.211]:41694 "EHLO na3sys009aog114.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750840AbZIWM27 (ORCPT ); Wed, 23 Sep 2009 08:28:59 -0400 Content-Disposition: inline Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Cc: James.Bottomley@HansenPartnership.com, Eric.Moore@lsi.com, Sathya.Prakash@lsi.com When receiving the MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET event, the driver will set the tm_busy flag in the sdev private host data, When tm_busy flag is set, the driver will return SCSI_MLQUEUE_DEVICE_BUSY, effectly freezing the IO to the device. The tm_busy flag is cleared with the MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET event. Signed-off-by: Kashyap Desai Signed-off-by: Eric Moore --- diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index f62c75c..a48b70f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -4308,11 +4308,43 @@ static void _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { + struct MPT2SAS_TARGET *target_priv_data; + struct _sas_device *sas_device; + __le64 sas_address; + unsigned long flags; + Mpi2EventDataSasDeviceStatusChange_t *event_data = + fw_event->event_data; + #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) _scsih_sas_device_status_change_event_debug(ioc, - fw_event->event_data); + event_data); #endif + + if (!(event_data->ReasonCode == + MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && + event_data->ReasonCode == + MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_address = le64_to_cpu(event_data->SASAddress); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (!sas_device || !sas_device->starget) + return; + + target_priv_data = sas_device->starget->hostdata; + if (!target_priv_data) + return; + + if (event_data->ReasonCode == + MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET) + target_priv_data->tm_busy = 1; + else + target_priv_data->tm_busy = 0; } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING