[Qemu-devel] [PATCH] qemu: target library, use it in msix

["Michael S. Tsirkin" <mst@redhat.com>]

This creates target.c, which builds per-target, and makes it possible
for devices to become target-independent.  Use it in msix, reverting
part of 5e520a7d500ec2569d22d80f9ef4272a34cb3c80, as we no longer have
to pass target page around.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 Makefile.target |    3 +++
 hw/msix.c       |   51 ++++++++++++++++++++++++++-------------------------
 hw/msix.h       |    5 ++---
 hw/pci.h        |    6 ------
 hw/virtio-pci.c |    3 +--
 5 files changed, 32 insertions(+), 36 deletions(-)

diff --git a/Makefile.target b/Makefile.target
index 0ebef17..c0f143a 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -55,6 +55,9 @@ libobj-$(CONFIG_S390_DIS) += s390-dis.o
 libobj-$(CONFIG_SH4_DIS) += sh4-dis.o
 libobj-$(CONFIG_SPARC_DIS) += sparc-dis.o
 
+# Target library: makes devices target-independent
+libobj-y += target.o
+
 # libqemu
 
 libqemu.a: $(libobj-y)
diff --git a/hw/msix.c b/hw/msix.c
index 3782994..af820ec 100644
--- a/hw/msix.c
+++ b/hw/msix.c
@@ -14,6 +14,7 @@
 #include "hw.h"
 #include "msix.h"
 #include "pci.h"
+#include "target.h"
 
 /* Declaration from linux/pci_regs.h */
 #define  PCI_CAP_ID_MSIX 0x11 /* MSI-X */
@@ -38,6 +39,15 @@
 #define MSIX_VECTOR_CTRL 12
 #define MSIX_ENTRY_SIZE 16
 #define MSIX_VECTOR_MASK 0x1
+
+/* How much space does an MSIX table need. */
+/* The spec requires giving the table structure
+ * a 4K aligned region all by itself. Align it to
+ * target pages so that drivers can do passthrough
+ * on the rest of the region. */
+#define MSIX_PAGE_SIZE target_page_align(0x1000)
+/* Reserve second half of the page for pending bits */
+#define MSIX_PAGE_PENDING (MSIX_PAGE_SIZE / 2)
 #define MSIX_MAX_ENTRIES 32
 
 
@@ -53,12 +63,6 @@
 /* Flag for interrupt controller to declare MSI-X support */
 int msix_supported;
 
-/* Reserve second half of the page for pending bits */
-static int msix_page_pending(PCIDevice *d)
-{
-    return (d->msix_page_size / 2);
-}
-
 /* Add MSI-X capability to the config space for the device. */
 /* Given a bar and its size, add MSI-X table on top of it
  * and fill MSI-X capability in the config space.
@@ -77,11 +81,11 @@ static int msix_add_config(struct PCIDevice *pdev, unsigned short nentries,
         return -ENOSPC;
 
     /* Add space for MSI-X structures */
-    if (!bar_size) {
-        new_size = pdev->msix_page_size;
-    } else if (bar_size < pdev->msix_page_size) {
-        bar_size = pdev->msix_page_size;
-        new_size = pdev->msix_page_size * 2;
+    if (!bar_size)
+        new_size = MSIX_PAGE_SIZE;
+    else if (bar_size < MSIX_PAGE_SIZE) {
+        bar_size = MSIX_PAGE_SIZE;
+        new_size = MSIX_PAGE_SIZE * 2;
     } else
         new_size = bar_size * 2;
 
@@ -95,8 +99,8 @@ static int msix_add_config(struct PCIDevice *pdev, unsigned short nentries,
     /* Table on top of BAR */
     pci_set_long(config + MSIX_TABLE_OFFSET, bar_size | bar_nr);
     /* Pending bits on top of that */
-    pci_set_long(config + MSIX_PBA_OFFSET, (bar_size + msix_page_pending(pdev))
-                 | bar_nr);
+    pci_set_long(config + MSIX_PBA_OFFSET, (bar_size + MSIX_PAGE_PENDING) |
+                 bar_nr);
     pdev->msix_cap = config_offset;
     /* Make flags bit writeable. */
     pdev->wmask[config_offset + MSIX_ENABLE_OFFSET] |= MSIX_ENABLE_MASK;
@@ -126,7 +130,7 @@ void msix_write_config(PCIDevice *dev, uint32_t addr,
 static uint32_t msix_mmio_readl(void *opaque, target_phys_addr_t addr)
 {
     PCIDevice *dev = opaque;
-    unsigned int offset = addr & (dev->msix_page_size - 1);
+    unsigned int offset = addr & (MSIX_PAGE_SIZE - 1);
     void *page = dev->msix_table_page;
     uint32_t val = 0;
 
@@ -148,7 +152,7 @@ static uint8_t msix_pending_mask(int vector)
 
 static uint8_t *msix_pending_byte(PCIDevice *dev, int vector)
 {
-    return dev->msix_table_page + msix_page_pending(dev) + vector / 8;
+    return dev->msix_table_page + MSIX_PAGE_PENDING + vector / 8;
 }
 
 static int msix_is_pending(PCIDevice *dev, int vector)
@@ -176,7 +180,7 @@ static void msix_mmio_writel(void *opaque, target_phys_addr_t addr,
                              uint32_t val)
 {
     PCIDevice *dev = opaque;
-    unsigned int offset = addr & (dev->msix_page_size - 1);
+    unsigned int offset = addr & (MSIX_PAGE_SIZE - 1);
     int vector = offset / MSIX_ENTRY_SIZE;
     memcpy(dev->msix_table_page + offset, &val, 4);
     if (!msix_is_masked(dev, vector) && msix_is_pending(dev, vector)) {
@@ -205,7 +209,7 @@ void msix_mmio_map(PCIDevice *d, int region_num,
 {
     uint8_t *config = d->config + d->msix_cap;
     uint32_t table = pci_get_long(config + MSIX_TABLE_OFFSET);
-    uint32_t offset = table & ~(d->msix_page_size - 1);
+    uint32_t offset = table & ~(MSIX_PAGE_SIZE - 1);
     /* TODO: for assigned devices, we'll want to make it possible to map
      * pending bits separately in case they are in a separate bar. */
     int table_bir = table & PCI_MSIX_FLAGS_BIRMASK;
@@ -221,7 +225,7 @@ void msix_mmio_map(PCIDevice *d, int region_num,
 /* Initialize the MSI-X structures. Note: if MSI-X is supported, BAR size is
  * modified, it should be retrieved with msix_bar_size. */
 int msix_init(struct PCIDevice *dev, unsigned short nentries,
-              unsigned bar_nr, unsigned bar_size, target_phys_addr_t page_size)
+              unsigned bar_nr, unsigned bar_size)
 {
     int ret;
     /* Nothing to do if MSI is not supported by interrupt controller */
@@ -234,8 +238,7 @@ int msix_init(struct PCIDevice *dev, unsigned short nentries,
     dev->msix_entry_used = qemu_mallocz(MSIX_MAX_ENTRIES *
                                         sizeof *dev->msix_entry_used);
 
-    dev->msix_page_size = page_size;
-    dev->msix_table_page = qemu_mallocz(dev->msix_page_size);
+    dev->msix_table_page = qemu_mallocz(MSIX_PAGE_SIZE);
 
     dev->msix_mmio_index = cpu_register_io_memory(msix_mmio_read,
                                                   msix_mmio_write, dev);
@@ -290,8 +293,7 @@ void msix_save(PCIDevice *dev, QEMUFile *f)
     }
 
     qemu_put_buffer(f, dev->msix_table_page, n * MSIX_ENTRY_SIZE);
-    qemu_put_buffer(f, dev->msix_table_page + msix_page_pending(dev),
-                    (n + 7) / 8);
+    qemu_put_buffer(f, dev->msix_table_page + MSIX_PAGE_PENDING, (n + 7) / 8);
 }
 
 /* Should be called after restoring the config space. */
@@ -305,8 +307,7 @@ void msix_load(PCIDevice *dev, QEMUFile *f)
 
     msix_free_irq_entries(dev);
     qemu_get_buffer(f, dev->msix_table_page, n * MSIX_ENTRY_SIZE);
-    qemu_get_buffer(f, dev->msix_table_page + msix_page_pending(dev),
-                    (n + 7) / 8);
+    qemu_get_buffer(f, dev->msix_table_page + MSIX_PAGE_PENDING, (n + 7) / 8);
 }
 
 /* Does device support MSI-X? */
@@ -356,7 +357,7 @@ void msix_reset(PCIDevice *dev)
         return;
     msix_free_irq_entries(dev);
     dev->config[dev->msix_cap + MSIX_ENABLE_OFFSET] &= MSIX_ENABLE_MASK;
-    memset(dev->msix_table_page, 0, dev->msix_page_size);
+    memset(dev->msix_table_page, 0, MSIX_PAGE_SIZE);
 }
 
 /* PCI spec suggests that devices make it possible for software to configure
diff --git a/hw/msix.h b/hw/msix.h
index 9367ba3..3427778 100644
--- a/hw/msix.h
+++ b/hw/msix.h
@@ -3,9 +3,8 @@
 
 #include "qemu-common.h"
 
-int msix_init(struct PCIDevice *dev, unsigned short nentries,
-              unsigned bar_nr, unsigned bar_size,
-              target_phys_addr_t page_size);
+int msix_init(PCIDevice *pdev, unsigned short nentries,
+              unsigned bar_nr, unsigned bar_size);
 
 void msix_write_config(PCIDevice *pci_dev, uint32_t address,
                        uint32_t val, int len);
diff --git a/hw/pci.h b/hw/pci.h
index dddd599..8cfc38d 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -214,12 +214,6 @@ struct PCIDevice {
     uint32_t msix_bar_size;
     /* Version id needed for VMState */
     int32_t version_id;
-    /* How much space does an MSIX table need. */
-    /* The spec requires giving the table structure
-     * a 4K aligned region all by itself. Align it to
-     * target pages so that drivers can do passthrough
-     * on the rest of the region. */
-    target_phys_addr_t msix_page_size;
 };
 
 PCIDevice *pci_register_device(PCIBus *bus, const char *name,
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 1f14c5e..3a0231e 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -410,8 +410,7 @@ static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
 
     config[0x3d] = 1;
 
-    if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0,
-                                     TARGET_PAGE_SIZE)) {
+    if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0)) {
         pci_register_bar(&proxy->pci_dev, 1,
                          msix_bar_size(&proxy->pci_dev),
                          PCI_ADDRESS_SPACE_MEM,
-- 
1.6.5.rc2