From: "Munzir Taha (منذر طه)" <munzirtaha@gmail.com>
To: alsa-devel@alsa-project.org
Subject: Re: Problems with Intel HDA driver
Date: Sun, 27 Sep 2009 23:23:56 +0300 [thread overview]
Message-ID: <200909272323.56548.munzirtaha@gmail.com> (raw)
In-Reply-To: <s5hocpdk6di.wl%tiwai@suse.de>
Hi Takashi,
I just updated my driver and libs to 1.0.21 to see whether this is fixed.
Unfortunately, when I plug my headphones, the laptop speakers are still
playing.
http://www.alsa-project.org/db/?f=c0082231c70ef69de999506f3d59dec0c0cdb633
On Yaum al-Ithnain 24 Ramadan 1430 4:23:05 pm Takashi Iwai wrote:
> At Mon, 14 Sep 2009 15:15:53 +0200,
>
> I wrote:
> > At Mon, 14 Sep 2009 16:15:02 +0300,
> >
> > Ozan Çağlayan wrote:
> > > Takashi Iwai wrote On 14-09-2009 15:36:
> > > > Yeah, I think we can add EAPD handling as default for IDT92HD71xx
> > > > codecs. I've never seen machines that can't live with GPIO0 bit up.
> > >
> > > enable_msi doesn't seem to affect the auto-muting problem. I played
> > > with every single node in hda-analyzer but can't get auto-mute work. I
> > > can manually mute the HP output and the internal speakers by
> > > checking/unchecking OUT checkboxes on relevant NIDs. There's a 8xn
> > > matrix for GPIO settings, I played with them as well to set unsol but
> > > nope.
> > >
> > > I want to remember that dell-m4-1 makes automute work but breaks the
> > > mixer channels:
> > >
> > > http://www.spinics.net/lists/alsa-devel/msg26714.html
> > >
> > > Err, I know that I didn't answer the last question in the thread as I'm
> > > a little bit lost in the NID pool and didn't have time to investigate
> > > further.
> >
> > Could you check whether this still valid?
> >
> > Basically the model option doesn't change the auto-mute behavior.
> > It just changes which pin to be detected and which pin to mute.
> > So, if model=dell-m4-1 makes the auto-muting working, it means
> > that the BIOS setup is broken.
>
> I looked through alsa-info output now, and found the culprit.
> NID 0x0f is set as a line-out, and currently the driver doesn't
> don't do auto-muting for line-out unless a headphone is present.
> Changing it to a headphone should fix. Or you can give hp_detect=1
> hint via sysfs and reconfigure.
>
>
> Takashi
--
Munzir Taha
Telecommunications and Electronics Engineer
Master CIW Designer, ICDL, MOUS, Linux+, LPI, SCSA
Riyadh, SA
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2009-09-27 20:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-14 11:33 Problems with Intel HDA driver Andrius Štikonas
2009-09-14 12:25 ` Takashi Iwai
2009-09-14 12:36 ` Ozan Çağlayan
2009-09-14 12:36 ` Takashi Iwai
2009-09-14 13:15 ` Ozan Çağlayan
2009-09-14 13:15 ` Takashi Iwai
2009-09-14 13:23 ` Takashi Iwai
2009-09-14 13:41 ` Ozan Çağlayan
2009-09-14 13:46 ` Takashi Iwai
2009-09-15 9:04 ` Ozan Çağlayan
2009-09-15 12:58 ` Takashi Iwai
2009-09-27 20:23 ` Munzir Taha (منذر طه) [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-09-27 20:27 Munzir Taha (منذر طه)
2009-09-27 20:44 ` Daniel Chen
2009-09-27 21:01 ` Munzir Taha (منذر طه)
2009-09-27 21:03 ` Daniel Chen
2009-09-27 21:31 ` Munzir Taha (منذر طه)
2009-09-27 21:53 ` Daniel Chen
2009-09-27 21:58 ` Munzir Taha (منذر طه)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200909272323.56548.munzirtaha@gmail.com \
--to=munzirtaha@gmail.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.