From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Mon, 28 Sep 2009 07:43:58 +0000 Subject: Re: [lm-sensors] PATCH: add sections for the new FTS chips to Message-Id: <20090928094358.0ea262c6@hyperion.delvare> List-Id: References: <1C27BF3FB8EE3A4D8F901C22ADE1DE07CE9D65F6E0@ABGEX72E.FSC.NET> In-Reply-To: <1C27BF3FB8EE3A4D8F901C22ADE1DE07CE9D65F6E0@ABGEX72E.FSC.NET> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Sun, 27 Sep 2009 18:48:34 +0200, Andre Prendel wrote: > On Wed, Sep 16, 2009 at 10:18:53AM +0200, Cestonaro, Thilo wrote: > > Hey, > > Hey Thilo, > > > here is a patch which adds new sections to the sensors.conf.default. > > The fts.conf can be used as a custom configuration in the wiki. > > Sorry for the delay. We had some problems with lm-sensors.org infrastructure. > > The motherboard specific configurations one can find now under > > http://www.lm-sensors.org/wiki/Configurations/FujitsuTechnologySolutions Thanks Andre :) > and I've commited your patch for default config file a few minutes ago. See > > http://www.lm-sensors.org/changeset/5775/lm-sensors/trunk Ignore statements in the default config file sounds wrong. What was the point of implementing inputs on the monitoring chip if they really are never used? -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors