From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: herton@mandriva.com.br, a.zummo@towertech.it, david-b@pacbell.net
Subject: + rtc-cmos-convert-rtc_aie-rtc_uie-to-rtc-irq-api.patch added to -mm tree
Date: Wed, 30 Sep 2009 11:59:45 -0700 [thread overview]
Message-ID: <200909301859.n8UIxjDt004797@imap1.linux-foundation.org> (raw)
The patch titled
rtc-cmos: convert RTC_AIE/RTC_UIE to rtc irq API
has been added to the -mm tree. Its filename is
rtc-cmos-convert-rtc_aie-rtc_uie-to-rtc-irq-api.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: rtc-cmos: convert RTC_AIE/RTC_UIE to rtc irq API
From: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Drop ioctl function that handles RTC_AIE/RTC_UIE, and use instead the
rtc subsystem API (alarm_irq_enable/update_irq_enable callbacks).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/rtc/rtc-cmos.c | 75 ++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 40 deletions(-)
diff -puN drivers/rtc/rtc-cmos.c~rtc-cmos-convert-rtc_aie-rtc_uie-to-rtc-irq-api drivers/rtc/rtc-cmos.c
--- a/drivers/rtc/rtc-cmos.c~rtc-cmos-convert-rtc_aie-rtc_uie-to-rtc-irq-api
+++ a/drivers/rtc/rtc-cmos.c
@@ -420,49 +420,43 @@ static int cmos_irq_set_state(struct dev
return 0;
}
-#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
-
-static int
-cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
unsigned long flags;
- switch (cmd) {
- case RTC_AIE_OFF:
- case RTC_AIE_ON:
- case RTC_UIE_OFF:
- case RTC_UIE_ON:
- if (!is_valid_irq(cmos->irq))
- return -EINVAL;
- break;
- /* PIE ON/OFF is handled by cmos_irq_set_state() */
- default:
- return -ENOIOCTLCMD;
- }
+ if (!is_valid_irq(cmos->irq))
+ return -EINVAL;
spin_lock_irqsave(&rtc_lock, flags);
- switch (cmd) {
- case RTC_AIE_OFF: /* alarm off */
- cmos_irq_disable(cmos, RTC_AIE);
- break;
- case RTC_AIE_ON: /* alarm on */
+
+ if (enabled)
cmos_irq_enable(cmos, RTC_AIE);
- break;
- case RTC_UIE_OFF: /* update off */
- cmos_irq_disable(cmos, RTC_UIE);
- break;
- case RTC_UIE_ON: /* update on */
- cmos_irq_enable(cmos, RTC_UIE);
- break;
- }
+ else
+ cmos_irq_disable(cmos, RTC_AIE);
+
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
-#else
-#define cmos_rtc_ioctl NULL
-#endif
+static int cmos_update_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct cmos_rtc *cmos = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (!is_valid_irq(cmos->irq))
+ return -EINVAL;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+
+ if (enabled)
+ cmos_irq_enable(cmos, RTC_UIE);
+ else
+ cmos_irq_disable(cmos, RTC_UIE);
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return 0;
+}
#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
@@ -503,14 +497,15 @@ static int cmos_procfs(struct device *de
#endif
static const struct rtc_class_ops cmos_rtc_ops = {
- .ioctl = cmos_rtc_ioctl,
- .read_time = cmos_read_time,
- .set_time = cmos_set_time,
- .read_alarm = cmos_read_alarm,
- .set_alarm = cmos_set_alarm,
- .proc = cmos_procfs,
- .irq_set_freq = cmos_irq_set_freq,
- .irq_set_state = cmos_irq_set_state,
+ .read_time = cmos_read_time,
+ .set_time = cmos_set_time,
+ .read_alarm = cmos_read_alarm,
+ .set_alarm = cmos_set_alarm,
+ .proc = cmos_procfs,
+ .irq_set_freq = cmos_irq_set_freq,
+ .irq_set_state = cmos_irq_set_state,
+ .alarm_irq_enable = cmos_alarm_irq_enable,
+ .update_irq_enable = cmos_update_irq_enable,
};
/*----------------------------------------------------------------*/
_
Patches currently in -mm which might be from herton@mandriva.com.br are
rtc-cmos-convert-rtc_aie-rtc_uie-to-rtc-irq-api.patch
reply other threads:[~2009-09-30 19:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200909301859.n8UIxjDt004797@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=a.zummo@towertech.it \
--cc=david-b@pacbell.net \
--cc=herton@mandriva.com.br \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.