[U-Boot] Please pull u-boot-mpc83xx.git

[Wolfgang Denk <wd@denx.de>]

Dear Kim Phillips,

In message <20090926212320.6a29616b.kim.phillips@freescale.com> you wrote:
> On Fri, 25 Sep 2009 18:39:46 -0500
> Kim Phillips <kim.phillips@freescale.com> wrote:
> 
> > I might just ask you to pull the "retain POR values" patch, but it's
> > too close to the window, and I want to give the opportunity for a good
> > review cycle on it.
> 
> At least Heiko commented on it, and I fixed and tested it ok, so please
> now pull:

OK.

> The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724:
>   Wolfgang Denk (1):
>         mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mpc83xx.git master
> 
> Anton Vorontsov (5):
>       net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
>       net: uec: Fix uccf.h and uec.h headers to include headers they depend on
>       mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
>       mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
>       mpc83xx: mpc8360emds: Add QE USB device tree fixups
> 
> Kim Phillips (1):
>       mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
> 
> Paul Gortmaker (1):
>       sbc8349: tidy up Makefile to use new configuration script.
> 
>  Makefile                                  |   15 +--
>  board/freescale/mpc8360emds/mpc8360emds.c |   73 ++++++++-
>  cpu/mpc83xx/cpu_init.c                    |  261 +++++++++++++++++------------
>  drivers/qe/uccf.h                         |    1 +
>  drivers/qe/uec.h                          |    4 +
>  drivers/qe/uec_phy.c                      |   15 ++-
>  include/configs/MPC8313ERDB.h             |    3 +-
>  include/configs/MPC8315ERDB.h             |    3 +-
>  include/configs/MPC8323ERDB.h             |    3 +-
>  include/configs/MPC832XEMDS.h             |    3 +-
>  include/configs/MPC8349EMDS.h             |    3 +-
>  include/configs/MPC8349ITX.h              |    3 +-
>  include/configs/MPC8360EMDS.h             |    9 +-
>  include/configs/MPC8360ERDK.h             |    3 +-
>  include/configs/MPC837XEMDS.h             |    3 +-
>  include/configs/MPC837XERDB.h             |    3 +-
>  include/configs/MVBLM7.h                  |    3 +-
>  include/configs/SIMPC8313.h               |    4 +-
>  include/configs/TQM834x.h                 |    3 +-
>  include/configs/kmeter1.h                 |    4 +-
>  include/configs/sbc8349.h                 |   18 ++-
>  include/configs/vme8349.h                 |    3 +-
>  22 files changed, 292 insertions(+), 148 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
...the increased productivity fostered by a friendly environment  and
quality  tools  is  essential  to  meet  ever  increasing demands for
software.               - M. D. McIlroy, E. N. Pinson and B. A. Tague