All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: alsa-devel@alsa-project.org
Cc: ext Tony Lindgren <tony@atomide.com>,
	"Ujfalusi Peter (Nokia-D/Tampere)" <peter.ujfalusi@nokia.com>,
	"Nurkkala Eero.An (EXT-Offcode/Oulu)"
	<ext-Eero.Nurkkala@nokia.com>,
	Linux-OMAP <linux-omap@vger.kernel.org>,
	ALSA-Devel <alsa-devel@vger.kernel.org>
Subject: Re: [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
Date: Thu, 8 Oct 2009 14:26:19 +0100	[thread overview]
Message-ID: <20091008132619.GE29176@rakim.wolfsonmicro.main> (raw)
In-Reply-To: <1255003137-1034-7-git-send-email-eduardo.valentin@nokia.com>

On Thu, Oct 08, 2009 at 02:58:55PM +0300, Eduardo Valentin wrote:

> +static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
> +	REGULATOR_SUPPLY("avdd_dac", "2-0018"), /* tlv320aic3x */
> +	REGULATOR_SUPPLY("vdd", "2-0060"), /* tpa6130a2*/
>  };

avdd_dac is the only supply added for the tlv320aic3x but, for example,
the tlv320aic34 has something like 8 supplies from a quick scan of the
datasheet.  It'd be better to set up all of the supplies, even if only
with a fixed voltage regulator supplying them, since when regulator
support is added to the CODEC driver it should be requesting all the
supplies it needs and therefore fail to instatiate if some are missing.

  reply	other threads:[~2009-10-08 13:26 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-08 11:58 [PATCH 0/8] RX-51 audio drivers Eduardo Valentin
2009-10-08 11:58 ` [PATCH 1/8] ASoC: TPA6130A2 amplifier driver Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 12:30   ` Eero Nurkkala
2009-10-08 13:07     ` Peter Ujfalusi
2009-10-08 13:07     ` Peter Ujfalusi
2009-10-08 12:30   ` Eero Nurkkala
2009-10-08 12:52   ` Mark Brown
2009-10-08 13:38     ` Peter Ujfalusi
2009-10-08 13:38     ` Peter Ujfalusi
2009-10-08 13:53       ` Mark Brown
2009-10-09  6:53         ` Peter Ujfalusi
2009-10-09  6:53         ` Peter Ujfalusi
2009-10-09 10:36           ` Mark Brown
2009-10-08 13:53       ` Mark Brown
2009-10-08 12:52   ` Mark Brown
2009-10-08 11:58 ` [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 12:31   ` Eero Nurkkala
2009-10-08 13:18     ` Eduardo Valentin
2009-10-08 13:18     ` Eduardo Valentin
2009-10-08 12:31   ` Eero Nurkkala
2009-10-08 13:11   ` Mark Brown
2009-10-09  5:44     ` Jarkko Nikula
2009-10-09  6:37       ` Eduardo Valentin
2009-10-09 12:19         ` Mark Brown
2009-10-09  6:37       ` Eduardo Valentin
2009-10-09  5:44     ` Jarkko Nikula
2009-10-08 13:11   ` Mark Brown
2009-10-08 11:58 ` [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 13:17   ` Mark Brown
2009-10-08 13:23     ` Eduardo Valentin
2009-10-08 13:27       ` Mark Brown
2009-10-09  5:09     ` Eero Nurkkala
2009-10-09 10:44       ` [alsa-devel] " Mark Brown
2009-10-12  6:17         ` Eero Nurkkala
2009-10-12  9:12           ` Mark Brown
2009-10-12  9:28             ` Eero Nurkkala
2009-10-12  9:32               ` Mark Brown
2009-10-12 10:28                 ` Eero Nurkkala
2009-10-12 10:33                   ` Mark Brown
2009-10-08 13:17   ` Mark Brown
2009-10-08 11:58 ` [PATCH 4/8] OMAP: RX51: Add audio board file Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 11:58 ` [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 13:21   ` Mark Brown
2009-10-09  6:45     ` Eduardo Valentin
2009-10-09  6:45     ` Eduardo Valentin
2009-10-09 11:03       ` Mark Brown
2009-10-12  8:08         ` Eduardo Valentin
2009-10-12  9:18           ` Mark Brown
2009-10-14 17:15             ` Tony Lindgren
2009-10-15  9:01               ` Mark Brown
2009-10-16 16:14                 ` Tony Lindgren
2009-10-08 13:21   ` Mark Brown
2009-10-08 11:58 ` [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2 Eduardo Valentin
2009-10-08 13:26   ` Mark Brown [this message]
2009-10-12  9:04     ` Eduardo Valentin
2009-10-12  9:21       ` Mark Brown
2009-10-12  9:21       ` Mark Brown
2009-10-19  9:13         ` Eduardo Valentin
2009-10-19  9:23           ` Mark Brown
2009-10-19  9:24             ` Mark Brown
2009-10-19  9:24             ` Mark Brown
2009-10-19  9:23           ` Mark Brown
2009-10-19  9:13         ` Eduardo Valentin
2009-10-12  9:04     ` Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 11:58 ` [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 12:17   ` Eero Nurkkala
2009-10-08 12:17   ` Eero Nurkkala
2009-10-08 13:17     ` Eduardo Valentin
2009-10-08 13:40     ` Mark Brown
2009-10-08 13:40     ` Mark Brown
2009-10-08 15:44       ` ext-Eero.Nurkkala
2009-10-08 15:44       ` ext-Eero.Nurkkala
2009-10-08 16:01         ` Mark Brown
2009-10-09  4:28           ` Eero Nurkkala
2009-10-09 10:19             ` Mark Brown
2009-10-09 10:19             ` Mark Brown
2009-10-09  4:28           ` Eero Nurkkala
2009-10-08 16:01         ` Mark Brown
2009-10-08 13:38   ` Mark Brown
2009-10-08 13:38   ` Mark Brown
2009-10-08 11:58 ` [PATCH 8/8] ASoC: tpa6130a2: Control vdd using regulator framework Eduardo Valentin
2009-10-08 11:58 ` Eduardo Valentin
2009-10-08 13:43   ` Mark Brown
2009-10-08 13:56     ` Eduardo Valentin
2009-10-08 14:41       ` Mark Brown
2009-10-08 14:41       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091008132619.GE29176@rakim.wolfsonmicro.main \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=alsa-devel@vger.kernel.org \
    --cc=ext-Eero.Nurkkala@nokia.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@nokia.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.