[U-Boot] [PATCH 2/7] mpc85xx: Add eSDHC support for MPC8569E-MDS boards

[Anton Vorontsov <avorontsov@ru.mvista.com>]

On Thu, Oct 08, 2009 at 10:52:08AM -0500, Kumar Gala wrote:
> 
> On Sep 15, 2009, at 11:15 PM, Kumar Gala wrote:
> 
> >
> >On Aug 19, 2009, at 1:37 PM, Anton Vorontsov wrote:
> >
> >>eSDHC is mutually exlusive with UART0* and I2C2. When eSDHC is
> >>used, we should switch u-boot console to UART1, and make the
> >>proper device-tree fixups.
> >>
> >>* Actually, according to User's Guide we can use eSDHC in serial
> >>(1-bit) mode without disabling UART0, but for me it doesn't work
> >>on prototype boards.
> >>
> >>Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> >>---
> >>board/freescale/mpc8569mds/mpc8569mds.c |   85 ++++++++++++++++++++++
> >>+++++++++
> >>cpu/mpc85xx/speed.c                     |    2 +
> >>include/asm-ppc/global_data.h           |    3 +-
> >>include/configs/MPC8569MDS.h            |   16 ++++++
> >>4 files changed, 105 insertions(+), 1 deletions(-)
> 
> Did you have any plans on updating these patches?

I'll resend the whole series soon...

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2