From: Eli Cohen <eli-VPRAkNaXOzVS1MOuV/RT9w@public.gmane.org>
To: Roland Dreier <rdreier-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
Cc: Linux RDMA list <linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCHv2] mlx4: remove limitation on LSO header size
Date: Sun, 11 Oct 2009 15:20:13 +0200 [thread overview]
Message-ID: <20091011132013.GA24725@mtls03> (raw)
Current code has a limitation as for the size of an LSO header not allowed to
cross a 64 byte boundary. This patch removes this limitation by setting the WQE
RR for large headers thus allowing LSO headers of any size. The extra buffer
reserved for MLX4_IB_QP_LSO QPs has been doubled, from 64 to 128 bytes,
assuming this is reasonable upper limit to header length.
Also, this patch will cause IB_DEVICE_UD_TSO to be set only of FW versions that
set MLX4_DEV_CAP_FLAG_BLH; e.g. FW version 2.6.000 and higher.
Signed-off-by: Eli Cohen <eli-VPRAkNaXOzVS1MOuV/RT9w@public.gmane.org>
---
Changes from previous version:
Use enums to describe cache line size and header spare buffer.
Pass to build_lso_seg() a be32 pointer to get the flags value and OR
it directly on ctrl->owner_opcode.
build_lso_seg() touches blh only if it sets the BLH flag. This OK
since is set to zero by the caller.
drivers/infiniband/hw/mlx4/main.c | 2 +-
drivers/infiniband/hw/mlx4/qp.c | 23 +++++++++++------------
include/linux/mlx4/device.h | 1 +
3 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 3cb3f47..e596537 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -103,7 +103,7 @@ static int mlx4_ib_query_device(struct ib_device *ibdev,
props->device_cap_flags |= IB_DEVICE_UD_AV_PORT_ENFORCE;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_IPOIB_CSUM)
props->device_cap_flags |= IB_DEVICE_UD_IP_CSUM;
- if (dev->dev->caps.max_gso_sz)
+ if (dev->dev->caps.max_gso_sz && dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_BLH)
props->device_cap_flags |= IB_DEVICE_UD_TSO;
if (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_RESERVED_LKEY)
props->device_cap_flags |= IB_DEVICE_LOCAL_DMA_LKEY;
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 219b103..cde2bdc 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -54,7 +54,8 @@ enum {
/*
* Largest possible UD header: send with GRH and immediate data.
*/
- MLX4_IB_UD_HEADER_SIZE = 72
+ MLX4_IB_UD_HEADER_SIZE = 72,
+ LSO_HEADER_SPARE = 128,
};
struct mlx4_ib_sqp {
@@ -67,7 +68,8 @@ struct mlx4_ib_sqp {
};
enum {
- MLX4_IB_MIN_SQ_STRIDE = 6
+ MLX4_IB_MIN_SQ_STRIDE = 6,
+ MLX4_CACHE_LINE_SIZE = 64,
};
static const __be32 mlx4_ib_opcode[] = {
@@ -261,7 +263,7 @@ static int send_wqe_overhead(enum ib_qp_type type, u32 flags)
case IB_QPT_UD:
return sizeof (struct mlx4_wqe_ctrl_seg) +
sizeof (struct mlx4_wqe_datagram_seg) +
- ((flags & MLX4_IB_QP_LSO) ? 64 : 0);
+ ((flags & MLX4_IB_QP_LSO) ? LSO_HEADER_SPARE : 0);
case IB_QPT_UC:
return sizeof (struct mlx4_wqe_ctrl_seg) +
sizeof (struct mlx4_wqe_raddr_seg);
@@ -1467,16 +1469,12 @@ static void __set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
struct mlx4_ib_qp *qp, unsigned *lso_seg_len,
- __be32 *lso_hdr_sz)
+ __be32 *lso_hdr_sz, __be32 *blh)
{
unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16);
- /*
- * This is a temporary limitation and will be removed in
- * a forthcoming FW release:
- */
- if (unlikely(halign > 64))
- return -EINVAL;
+ if (unlikely(halign > MLX4_CACHE_LINE_SIZE))
+ *blh = cpu_to_be32(1 << 6);
if (unlikely(!(qp->flags & MLX4_IB_QP_LSO) &&
wr->num_sge > qp->sq.max_gs - (halign >> 4)))
@@ -1523,6 +1521,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
__be32 *lso_wqe;
__be32 uninitialized_var(lso_hdr_sz);
int i;
+ __be32 blh = 0;
spin_lock_irqsave(&qp->sq.lock, flags);
@@ -1616,7 +1615,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
if (wr->opcode == IB_WR_LSO) {
- err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz);
+ err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz, &blh);
if (unlikely(err)) {
*bad_wr = wr;
goto out;
@@ -1687,7 +1686,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
}
ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
- (ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0);
+ (ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
stamp = ind + qp->sq_spare_wqes;
ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index ce7cc6c..e92d1bf 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -61,6 +61,7 @@ enum {
MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR = 1 << 8,
MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR = 1 << 9,
MLX4_DEV_CAP_FLAG_DPDP = 1 << 12,
+ MLX4_DEV_CAP_FLAG_BLH = 1 << 15,
MLX4_DEV_CAP_FLAG_MEM_WINDOW = 1 << 16,
MLX4_DEV_CAP_FLAG_APM = 1 << 17,
MLX4_DEV_CAP_FLAG_ATOMIC = 1 << 18,
--
1.6.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2009-10-11 13:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-11 13:20 Eli Cohen [this message]
2009-10-12 17:04 ` [PATCHv2] mlx4: remove limitation on LSO header size Roland Dreier
[not found] ` <adaeip8h7cd.fsf-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
2009-10-12 20:41 ` Eli Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091011132013.GA24725@mtls03 \
--to=eli-vpraknaxozvs1mouv/rt9w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rdreier-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.