From: Rusty Russell <rusty@rustcorp.com.au>
To: Dave Jones <davej@redhat.com>
Cc: Dominik Brodowski <linux@brodo.de>,
dave.mueller@gmx.ch, linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH] cpufreq: use an enum for speedstep processor identification
Date: Mon, 19 Oct 2009 15:33:16 +1030 [thread overview]
Message-ID: <200910191533.16979.rusty@rustcorp.com.au> (raw)
In-Reply-To: <200910191418.23238.rusty@rustcorp.com.au>
The "unsigned int processor" everywhere confused Rusty, leading to
breakage when he passed in smp_processor_id().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset
/* speedstep_processor
*/
-static unsigned int speedstep_processor;
+static enum speedstep_processor speedstep_processor;
static u32 pmbase;
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
@@ -34,7 +34,7 @@ static int relaxed_check;
* GET PROCESSOR CORE SPEED IN KHZ *
*********************************************************************/
-static unsigned int pentium3_get_frequency(unsigned int processor)
+static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
{
/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
struct {
@@ -227,7 +227,7 @@ static unsigned int pentium4_get_frequen
/* Warning: may get called from smp_call_function_single. */
-unsigned int speedstep_get_frequency(unsigned int processor)
+unsigned int speedstep_get_frequency(enum speedstep_processor processor)
{
switch (processor) {
case SPEEDSTEP_CPU_PCORE:
@@ -380,7 +380,7 @@ EXPORT_SYMBOL_GPL(speedstep_detect_proce
* DETECT SPEEDSTEP SPEEDS *
*********************************************************************/
-unsigned int speedstep_get_freqs(unsigned int processor,
+unsigned int speedstep_get_freqs(enum speedstep_processor processor,
unsigned int *low_speed,
unsigned int *high_speed,
unsigned int *transition_latency,
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
@@ -11,18 +11,18 @@
/* processors */
-
-#define SPEEDSTEP_CPU_PIII_C_EARLY 0x00000001 /* Coppermine core */
-#define SPEEDSTEP_CPU_PIII_C 0x00000002 /* Coppermine core */
-#define SPEEDSTEP_CPU_PIII_T 0x00000003 /* Tualatin core */
-#define SPEEDSTEP_CPU_P4M 0x00000004 /* P4-M */
-
+enum speedstep_processor {
+ SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */
+ SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */
+ SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */
+ SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */
/* the following processors are not speedstep-capable and are not auto-detected
* in speedstep_detect_processor(). However, their speed can be detected using
* the speedstep_get_frequency() call. */
-#define SPEEDSTEP_CPU_PM 0xFFFFFF03 /* Pentium M */
-#define SPEEDSTEP_CPU_P4D 0xFFFFFF04 /* desktop P4 */
-#define SPEEDSTEP_CPU_PCORE 0xFFFFFF05 /* Core */
+ SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */
+ SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */
+ SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */
+};
/* speedstep states -- only two of them */
@@ -31,10 +31,10 @@
/* detect a speedstep-capable processor */
-extern unsigned int speedstep_detect_processor (void);
+extern enum speedstep_processor speedstep_detect_processor (void);
/* detect the current speed (in khz) of the processor */
-extern unsigned int speedstep_get_frequency(unsigned int processor);
+extern unsigned int speedstep_get_frequency(enum speedstep_processor processor);
/* detect the low and high speeds of the processor. The callback
@@ -42,7 +42,7 @@ extern unsigned int speedstep_get_freque
* SPEEDSTEP_LOW; the second argument is zero so that no
* cpufreq_notify_transition calls are initiated.
*/
-extern unsigned int speedstep_get_freqs(unsigned int processor,
+extern unsigned int speedstep_get_freqs(enum speedstep_processor processor,
unsigned int *low_speed,
unsigned int *high_speed,
unsigned int *transition_latency,
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -35,7 +35,7 @@ static int smi_cmd;
static unsigned int smi_sig;
/* info about the processor */
-static unsigned int speedstep_processor;
+static enum speedstep_processor speedstep_processor;
/*
* There are only two frequency states for each processor. Values
prev parent reply other threads:[~2009-10-19 5:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20091007201108.GA16813@redhat.com>
2009-10-19 3:48 ` Fwd: [Bug 14340] New: speedstep-ich driver not working in 2.6.31 Rusty Russell
2009-10-19 3:54 ` Andrew Morton
2009-10-19 5:03 ` Rusty Russell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200910191533.16979.rusty@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=akpm@linux-foundation.org \
--cc=dave.mueller@gmx.ch \
--cc=davej@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@brodo.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.