From: Matthew Garrett <mjg59@srcf.ucam.org>
To: linux-kernel@vger.kernel.org
Cc: feng.tang@intel.com, tglx@linutronix.de
Subject: Re: [REGRESSION] EFI boot on x86 fails in .32
Date: Tue, 20 Oct 2009 04:06:57 +0100 [thread overview]
Message-ID: <20091020030656.GA30139@srcf.ucam.org> (raw)
In-Reply-To: <20091020003400.GA27997@srcf.ucam.org>
This seems to be caused by 7bd867dfb4e0357e06a3211ab2bd0e714110def3 -
reverting that results in a booting kernel. Can't say I understand how
or why, but...
On Tue, Oct 20, 2009 at 01:34:00AM +0100, Matthew Garrett wrote:
> 2.6.32-rc5 (and some earlier git checkout I had) fail to boot on my HP
> 2530p when using EFI - they boot fine with the BIOS emulation instead. I
> get an early exception when print_efi_memmap() is called, which implies
> that the memory map is broken somehow. Here's the dmesg for a working
> boot:
>
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.30.8-64.fc11.x86_64 (mockbuild@x86-5.fedora.phx.redhat.com) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #1 SMP Fri Sep 25 04:43:32 EDT 2009
> Command line: ro root=UUID=fd334e23-080a-449d-8993-07758e5cd581 rhgb quiet
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 0000000075a4c000 (usable)
> BIOS-e820: 0000000075a4c000 - 0000000075a4e000 (reserved)
> BIOS-e820: 0000000075a4e000 - 0000000076870000 (usable)
> BIOS-e820: 0000000076870000 - 0000000076880000 (ACPI NVS)
> BIOS-e820: 0000000076880000 - 0000000078fb1000 (usable)
> BIOS-e820: 0000000078fb1000 - 00000000791b1000 (ACPI NVS)
> BIOS-e820: 00000000791b1000 - 000000007a88f000 (usable)
> BIOS-e820: 000000007a88f000 - 000000007a9cf000 (reserved)
> BIOS-e820: 000000007a9cf000 - 000000007aacf000 (ACPI NVS)
> BIOS-e820: 000000007aacf000 - 000000007aaff000 (ACPI data)
> BIOS-e820: 000000007aaff000 - 000000007ab00000 (usable)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fffa0000 - 00000000fffa7000 (reserved)
> EFI v2.00 by INTEL
> ACPI=0x7aafe000 ACPI 2.0=0x7aafe014 SMBIOS=0x7a99f718
> Kernel-defined memdesc doesn't match the one from EFI!
> EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
> EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000071000) (0MB)
> EFI: mem02: type=2, attr=0xf, range=[0x0000000000071000-0x0000000000073000) (0MB)
> EFI: mem03: type=7, attr=0xf, range=[0x0000000000073000-0x0000000000075000) (0MB)
> EFI: mem04: type=3, attr=0xf, range=[0x0000000000075000-0x0000000000090000) (0MB)
> EFI: mem05: type=7, attr=0xf, range=[0x0000000000090000-0x0000000000097000) (0MB)
> EFI: mem06: type=4, attr=0xf, range=[0x0000000000097000-0x0000000000098000) (0MB)
> EFI: mem07: type=3, attr=0xf, range=[0x0000000000098000-0x00000000000a0000) (0MB)
> EFI: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
> EFI: mem09: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
> EFI: mem10: type=7, attr=0xf, range=[0x0000000001000000-0x000000007493e000) (1849MB)
> EFI: mem11: type=2, attr=0xf, range=[0x000000007493e000-0x0000000074940000) (0MB)
> EFI: mem12: type=7, attr=0xf, range=[0x0000000074940000-0x0000000074943000) (0MB)
> EFI: mem13: type=2, attr=0xf, range=[0x0000000074943000-0x00000000759cd000) (16MB)
> EFI: mem14: type=1, attr=0xf, range=[0x00000000759cd000-0x0000000075a05000) (0MB)
> EFI: mem15: type=3, attr=0xf, range=[0x0000000075a05000-0x0000000075a4c000) (0MB)
> EFI: mem16: type=0, attr=0xf, range=[0x0000000075a4c000-0x0000000075a4e000) (0MB)
> EFI: mem17: type=3, attr=0xf, range=[0x0000000075a4e000-0x0000000075f0b000) (4MB)
> EFI: mem18: type=4, attr=0xf, range=[0x0000000075f0b000-0x0000000076870000) (9MB)
> EFI: mem19: type=10, attr=0xf, range=[0x0000000076870000-0x0000000076880000) (0MB)
> EFI: mem20: type=3, attr=0xf, range=[0x0000000076880000-0x000000007688f000) (0MB)
> EFI: mem21: type=7, attr=0xf, range=[0x000000007688f000-0x0000000077a8f000) (18MB)
> EFI: mem22: type=2, attr=0xf, range=[0x0000000077a8f000-0x0000000077d99000) (3MB)
> EFI: mem23: type=4, attr=0xf, range=[0x0000000077d99000-0x0000000077db9000) (0MB)
> EFI: mem24: type=7, attr=0xf, range=[0x0000000077db9000-0x0000000077dc9000) (0MB)
> EFI: mem25: type=4, attr=0xf, range=[0x0000000077dc9000-0x0000000077fcf000) (2MB)
> EFI: mem26: type=7, attr=0xf, range=[0x0000000077fcf000-0x0000000077fd0000) (0MB)
> EFI: mem27: type=4, attr=0xf, range=[0x0000000077fd0000-0x0000000078462000) (4MB)
> EFI: mem28: type=7, attr=0xf, range=[0x0000000078462000-0x0000000078463000) (0MB)
> EFI: mem29: type=4, attr=0xf, range=[0x0000000078463000-0x0000000078fb1000) (11MB)
> EFI: mem30: type=10, attr=0xf, range=[0x0000000078fb1000-0x00000000791b1000) (2MB)
> EFI: mem31: type=4, attr=0xf, range=[0x00000000791b1000-0x0000000079269000) (0MB)
> EFI: mem32: type=7, attr=0xf, range=[0x0000000079269000-0x000000007926c000) (0MB)
> EFI: mem33: type=4, attr=0xf, range=[0x000000007926c000-0x000000007a88f000) (22MB)
> EFI: mem34: type=5, attr=0x800000000000000f, range=[0x000000007a88f000-0x000000007a92a000) (0MB)
> EFI: mem35: type=5, attr=0x800000000000000f, range=[0x000000007a92a000-0x000000007a98f000) (0MB)
> EFI: mem36: type=6, attr=0x800000000000000f, range=[0x000000007a98f000-0x000000007a993000) (0MB)
> EFI: mem37: type=0, attr=0xf, range=[0x000000007a993000-0x000000007a99b000) (0MB)
> EFI: mem38: type=6, attr=0x800000000000000f, range=[0x000000007a99b000-0x000000007a9bf000) (0MB)
> EFI: mem39: type=0, attr=0xf, range=[0x000000007a9bf000-0x000000007a9c4000) (0MB)
> EFI: mem40: type=0, attr=0xf, range=[0x000000007a9c4000-0x000000007a9cf000) (0MB)
> EFI: mem41: type=10, attr=0xf, range=[0x000000007a9cf000-0x000000007aa38000) (0MB)
> EFI: mem42: type=10, attr=0xf, range=[0x000000007aa38000-0x000000007aacf000) (0MB)
> EFI: mem43: type=9, attr=0xf, range=[0x000000007aacf000-0x000000007aad5000) (0MB)
> EFI: mem44: type=9, attr=0xf, range=[0x000000007aad5000-0x000000007aaff000) (0MB)
> EFI: mem45: type=4, attr=0xf, range=[0x000000007aaff000-0x000000007ab00000) (0MB)
> EFI: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
> EFI: mem47: type=11, attr=0x8000000000000000, range=[0x00000000fffa0000-0x00000000fffa7000) (0MB)
> DMI 2.4 present.
> last_pfn = 0x7ab00 max_arch_pfn = 0x100000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
> 00000-9FFFF write-back
> A0000-BFFFF uncachable
> C0000-FFFFF write-protect
> MTRR variable ranges enabled:
> 0 base 0FFE00000 mask FFFE00000 write-protect
> 1 base 000000000 mask F80000000 write-back
> 2 base 07F000000 mask FFF000000 uncachable
> 3 base 076870000 mask FFFFF0000 uncachable
> 4 disabled
> 5 disabled
> 6 disabled
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> original variable MTRRs
> reg 0, base: 4094MB, range: 2MB, type WP
> reg 1, base: 0GB, range: 2GB, type WB
> reg 2, base: 2032MB, range: 16MB, type UC
> reg 3, base: 1941952KB, range: 64KB, type UC
> total RAM coverred: 2031M
> gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 138688K
> gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 138688K
> gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K
> gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K
> gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K
> gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 128M
> gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 128M
> gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
> gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
> gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 138688K
> gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K
> gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K
> gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K
> gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 131136K
> gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 131136K
> gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 64K
> gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 64K
> gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 64K
> gran_size: 128K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K
> gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K
> gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K
> gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 131264K
> gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 131264K
> gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 192K
> gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 192K
> gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 192K
> gran_size: 256K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K
> gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 512K chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 1M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 2M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 2M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 4M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 145856K
> *BAD*gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: -7744K
> *BAD*gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: -7744K
> gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 512M num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 2G num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 145856K
> *BAD*gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: -7744K
> *BAD*gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: -7744K
> gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 512M num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 145856K
> gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 156096K
> gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 512M num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 176576K
> gran_size: 128M chunk_size: 128M num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 256M num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 512M num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 1G num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 2G num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 256M num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 512M num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 1G num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 2G num_reg: 3 lose cover RAM: 245696K
> gran_size: 512M chunk_size: 512M num_reg: 2 lose cover RAM: 507840K
> gran_size: 512M chunk_size: 1G num_reg: 2 lose cover RAM: 507840K
> gran_size: 512M chunk_size: 2G num_reg: 2 lose cover RAM: 507840K
> gran_size: 1G chunk_size: 1G num_reg: 1 lose cover RAM: 1032128K
> gran_size: 1G chunk_size: 2G num_reg: 1 lose cover RAM: 1032128K
> gran_size: 2G chunk_size: 2G num_reg: 0 lose cover RAM: 2080704K
> mtrr_cleanup: can not find optimal value
> please specify mtrr_gran_size/mtrr_chunk_size
> init_memory_mapping: 0000000000000000-000000007ab00000
> 0000000000 - 007aa00000 page 2M
> 007aa00000 - 007ab00000 page 4k
> kernel direct mapping tables up to 7ab00000 @ 8000-c000
> RAMDISK: 77a8f000 - 77d98445
> ACPI: RSDP 000000007aafe014 00024 (v02 HPQOEM)
> ACPI: XSDT 000000007aafe120 00084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
> ACPI: FACP 000000007aafc000 000F4 (v03 HPQOEM 30E1 0000000F HP 00000001)
> ACPI: DSDT 000000007aade000 18BB2 (v01 HPQOEM 30E1 00000001 INTL 20060912)
> ACPI: FACS 000000007aa9d000 00040
> ACPI: HPET 000000007aafb000 00038 (v01 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: APIC 000000007aafa000 00084 (v01 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: MCFG 000000007aaf9000 0003C (v01 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: TCPA 000000007aaf7000 00032 (v02 HPQOEM 30E1 00000000 HP 00000001)
> ACPI: SSDT 000000007aadb000 002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912)
> ACPI: SLIC 000000007aad9000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
> ACPI: DMAR 000000007aad8000 00120 (v01 \x01 00000001 00000000)
> ACPI: ASF! 000000007aaf8000 00095 (v32 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: SSDT 000000007aad7000 0066C (v01 PmRef CpuPm 00003000 INTL 20060912)
> ACPI: SSDT 000000007aad6000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
> ACPI: SSDT 000000007aad5000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
> ACPI: Local APIC address 0xfee00000
> No NUMA configuration found
> Faking a node at 0000000000000000-000000007ab00000
> Bootmem setup node 0 0000000000000000-000000007ab00000
> NODE_DATA [000000000000a000 - 000000000001efff]
> bootmap [000000000001f000 - 000000000002e55f] pages 10
> (8 early reservations) ==> bootmem [0000000000 - 007ab00000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 0000bd11a0] TEXT DATA BSS ==> [0000200000 - 0000bd11a0]
> #3 [0077a8f000 - 0077d98445] RAMDISK ==> [0077a8f000 - 0077d98445]
> #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
> #5 [007493e000 - 007493e900] EFI memmap ==> [007493e000 - 007493e900]
> #6 [0000bd2000 - 0000bd21bc] BRK ==> [0000bd2000 - 0000bd21bc]
> #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[6] active PFN ranges
> 0: 0x00000000 -> 0x000000a0
> 0: 0x00000100 -> 0x00075a4c
> 0: 0x00075a4e -> 0x00076870
> 0: 0x00076880 -> 0x00078fb1
> 0: 0x000791b1 -> 0x0007a88f
> 0: 0x0007aaff -> 0x0007ab00
> On node 0 totalpages: 501278
> DMA zone: 56 pages used for memmap
> DMA zone: 2614 pages reserved
> DMA zone: 1330 pages, LIFO batch:0
> DMA32 zone: 6815 pages used for memmap
> DMA32 zone: 490463 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> SMP: Allowing 4 CPUs, 2 hotplug CPUs
> nr_irqs_gsi: 24
> PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
> PM: Registered nosave memory: 0000000075a4c000 - 0000000075a4e000
> PM: Registered nosave memory: 0000000076870000 - 0000000076880000
> PM: Registered nosave memory: 0000000078fb1000 - 00000000791b1000
> PM: Registered nosave memory: 000000007a88f000 - 000000007a9cf000
> PM: Registered nosave memory: 000000007a9cf000 - 000000007aacf000
> PM: Registered nosave memory: 000000007aacf000 - 000000007aaff000
> Allocating PCI resources starting at 80000000 (gap: 7ab00000:8421c000)
> NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
> PERCPU: Embedded 27 pages at ffff880001010000, static data 79584 bytes
> Built 1 zonelists in Node order, mobility grouping on. Total pages: 491793
> Policy zone: DMA32
> Kernel command line: ro root=UUID=fd334e23-080a-449d-8993-07758e5cd581 rhgb quiet
> Initializing CPU#0
> NR_IRQS:4352 nr_irqs:440
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> Fast TSC calibration using PIT
> Detected 1197.010 MHz processor.
> Console: colour VGA+ 128x40
> console [tty0] enabled
> allocated 20971520 bytes of page_cgroup
> please try cgroup_disable=memory option if you don't want
> Checking aperture...
> No AGP bridge found
> Calgary: detecting Calgary via BIOS EBDA area
> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> Memory: 1942040k/2010112k available (4736k kernel code, 5000k absent, 63072k reserved, 2498k data, 1348k init)
> SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> hpet clockevent registered
> HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.02 BogoMIPS (lpj=1197010)
> init_memory_mapping: 00000000fed1c000-00000000fed20000
> 00fed1c000 - 00fed20000 page 4k
> init_memory_mapping: 00000000fffa0000-00000000fffa7000
> 00fffa0000 - 00fffa7000 page 4k
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys memory
> Initializing cgroup subsys devices
> Initializing cgroup subsys freezer
> Initializing cgroup subsys net_cls
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 3072K
> CPU 0/0x0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring handled by SMI
> using mwait in idle threads.
> ACPI: Core revision 20090320
> ftrace: converting mcount calls to 0f 1f 44 00 00
> ftrace: allocating 19374 entries in 76 pages
> Setting APIC routing to flat
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 2393.88 BogoMIPS (lpj=1196943)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 3072K
> CPU 1/0x1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (4787.90 BogoMIPS).
> sizeof(vma)=176 bytes
> sizeof(page)=56 bytes
> sizeof(inode)=576 bytes
> sizeof(dentry)=192 bytes
> sizeof(ext3inode)=784 bytes
> sizeof(buffer_head)=104 bytes
> sizeof(skbuff)=232 bytes
> sizeof(task_struct)=5960 bytes
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> net_namespace: 1952 bytes
> Booting paravirtualized kernel on bare hardware
> regulator: core version 0.5
> Time: 13:56:42 Date: 10/19/09
> NET: Registered protocol family 16
> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1 for base access
> bio: create slab <bio-0> at 0
> ACPI: EC: Look up EC in DSDT
> ACPI: BIOS _OSI(Linux) query ignored
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
> PCI: Using MMCONFIG at e0000000 - efffffff
> ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in interrupt mode
> ACPI: Power Resource [APPR] (off)
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> DMAR: Forcing write-buffer flush capability
> pci 0000:00:02.0: reg 10 64bit mmio: [0x94000000-0x943fffff]
> pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
> pci 0000:00:02.0: reg 20 io port: [0x4138-0x413f]
> pci 0000:00:02.1: reg 10 64bit mmio: [0x94400000-0x944fffff]
> pci 0000:00:03.0: reg 10 64bit mmio: [0x94827000-0x9482700f]
> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:03.0: PME# disabled
> pci 0000:00:03.2: reg 10 io port: [0x4130-0x4137]
> pci 0000:00:03.2: reg 14 io port: [0x414c-0x414f]
> pci 0000:00:03.2: reg 18 io port: [0x4128-0x412f]
> pci 0000:00:03.2: reg 1c io port: [0x4148-0x414b]
> pci 0000:00:03.2: reg 20 io port: [0x4100-0x410f]
> pci 0000:00:03.3: reg 10 io port: [0x4120-0x4127]
> pci 0000:00:03.3: reg 14 32bit mmio: [0x94825000-0x94825fff]
> pci 0000:00:19.0: reg 10 32bit mmio: [0x94800000-0x9481ffff]
> pci 0000:00:19.0: reg 14 32bit mmio: [0x94824000-0x94824fff]
> pci 0000:00:19.0: reg 18 io port: [0x40e0-0x40ff]
> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:19.0: PME# disabled
> pci 0000:00:1a.0: reg 20 io port: [0x40c0-0x40df]
> pci 0000:00:1a.1: reg 20 io port: [0x40a0-0x40bf]
> pci 0000:00:1a.2: reg 20 io port: [0x4080-0x409f]
> pci 0000:00:1a.7: reg 10 32bit mmio: [0x94826c00-0x94826fff]
> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1a.7: PME# disabled
> pci 0000:00:1b.0: reg 10 64bit mmio: [0x94820000-0x94823fff]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: PME# disabled
> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.2: PME# disabled
> pci 0000:00:1d.0: reg 20 io port: [0x4060-0x407f]
> pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f]
> pci 0000:00:1d.2: reg 20 io port: [0x4020-0x403f]
> pci 0000:00:1d.7: reg 10 32bit mmio: [0x94826800-0x94826bff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.2: reg 10 io port: [0x4118-0x411f]
> pci 0000:00:1f.2: reg 14 io port: [0x4144-0x4147]
> pci 0000:00:1f.2: reg 18 io port: [0x4110-0x4117]
> pci 0000:00:1f.2: reg 1c io port: [0x4140-0x4143]
> pci 0000:00:1f.2: reg 20 io port: [0x4000-0x401f]
> pci 0000:00:1f.2: reg 24 32bit mmio: [0x94826000-0x948267ff]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> pci 0000:00:1c.0: bridge 32bit mmio: [0x94700000-0x947fffff]
> pci 0000:02:00.0: reg 10 64bit mmio: [0x94600000-0x94601fff]
> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:02:00.0: PME# disabled
> pci 0000:00:1c.1: bridge 32bit mmio: [0x94600000-0x946fffff]
> pci 0000:00:1c.2: bridge io port: [0x2000-0x3fff]
> pci 0000:00:1c.2: bridge 32bit mmio: [0x90000000-0x93ffffff]
> pci 0000:44:06.0: reg 10 32bit mmio: [0x94500000-0x945007ff]
> pci 0000:44:06.0: supports D1 D2
> pci 0000:44:06.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:44:06.0: PME# disabled
> pci 0000:44:06.1: reg 10 32bit mmio: [0x94500900-0x945009ff]
> pci 0000:44:06.1: supports D1 D2
> pci 0000:44:06.1: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:44:06.1: PME# disabled
> pci 0000:44:06.2: reg 10 32bit mmio: [0x94500800-0x945008ff]
> pci 0000:44:06.2: supports D1 D2
> pci 0000:44:06.2: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:44:06.2: PME# disabled
> pci 0000:00:1e.0: transparent bridge
> pci 0000:00:1e.0: bridge 32bit mmio: [0x94500000-0x945fffff]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> DMAR:Host address width 36
> DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb03000
> DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000
> DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb00000
> DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb02000
> DMAR:RMRR base: 0x0000000076870000 end: 0x000000007687ffff
> DMAR:RMRR base: 0x000000007ac00000 end: 0x000000007effffff
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> alloc irq_desc for 23 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
> system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
> system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
> system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
> system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
> system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
> system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
> system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
> system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
> system 00:07: ioport range 0x200-0x27f has been reserved
> system 00:07: ioport range 0x1000-0x1003 has been reserved
> system 00:07: ioport range 0x1010-0x101f has been reserved
> system 00:07: ioport range 0xffff-0xffff has been reserved
> system 00:07: ioport range 0x400-0x47f has been reserved
> system 00:07: ioport range 0x500-0x57f has been reserved
> system 00:07: ioport range 0xef80-0xef9f has been reserved
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:1c.0: IO window: disabled
> pci 0000:00:1c.0: MEM window: 0x94700000-0x947fffff
> pci 0000:00:1c.0: PREFETCH window: disabled
> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.1: IO window: disabled
> pci 0000:00:1c.1: MEM window: 0x94600000-0x946fffff
> pci 0000:00:1c.1: PREFETCH window: disabled
> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
> pci 0000:00:1c.2: IO window: 0x2000-0x3fff
> pci 0000:00:1c.2: MEM window: 0x90000000-0x93ffffff
> pci 0000:00:1c.2: PREFETCH window: disabled
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:44
> pci 0000:00:1e.0: IO window: disabled
> pci 0000:00:1e.0: MEM window: 0x94500000-0x945fffff
> pci 0000:00:1e.0: PREFETCH window: disabled
> pci 0000:00:1c.0: enabling device (0000 -> 0002)
> alloc irq_desc for 16 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.0: setting latency timer to 64
> alloc irq_desc for 17 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: enabling device (0000 -> 0003)
> alloc irq_desc for 18 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1e.0: setting latency timer to 64
> pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
> pci_bus 0000:01: resource 1 mem: [0x94700000-0x947fffff]
> pci_bus 0000:02: resource 1 mem: [0x94600000-0x946fffff]
> pci_bus 0000:03: resource 0 io: [0x2000-0x3fff]
> pci_bus 0000:03: resource 1 mem: [0x90000000-0x93ffffff]
> pci_bus 0000:44: resource 1 mem: [0x94500000-0x945fffff]
> pci_bus 0000:44: resource 3 io: [0x00-0xffff]
> pci_bus 0000:44: resource 4 mem: [0x000000-0xffffffffffffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> Trying to unpack rootfs image as initramfs...
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 0
> Freeing initrd memory: 3109k freed
> audit: initializing netlink socket (disabled)
> type=2000 audit(1255960602.522:1): initialized
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 3799
> SELinux: Registering netfilter hooks
> alg: No test for stdrng (krng)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:00:02.0: Boot video device
> alloc irq_desc for 24 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
> pcieport-driver 0000:00:1c.0: setting latency timer to 64
> alloc irq_desc for 25 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
> pcieport-driver 0000:00:1c.1: setting latency timer to 64
> alloc irq_desc for 26 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
> pcieport-driver 0000:00:1c.2: setting latency timer to 64
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp_glue: can't get bus number, assuming 0
> acpiphp: Slot [1] registered
> efifb: invalid framebuffer address
> ACPI: AC Adapter [AC] (on-line)
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button [PWRF]
> input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
> ACPI: Sleep Button [SLPB]
> input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
> ACPI: Lid Switch [LID]
> ACPI: SSDT 000000007a9c7c98 00233 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
> ACPI: SSDT 000000007a9c5618 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
> ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320]
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Marking TSC unstable due to TSC halts in idle
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> processor ACPI_CPU:00: registered as cooling_device0
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: SSDT 000000007a9c6e18 001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
> ACPI: SSDT 000000007a9c7f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
> ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320]
> ACPI: CPU1 (power states: C1[C1] C2[C2])
> processor ACPI_CPU:01: registered as cooling_device1
> ACPI: Processor [CPU1] (supports 8 throttling states)
> thermal LNXTHERM:01: registered as thermal_zone0
> ACPI: Thermal Zone [DTSZ] (39 C)
> thermal LNXTHERM:02: registered as thermal_zone1
> ACPI: Thermal Zone [BATZ] (27 C)
> thermal LNXTHERM:03: registered as thermal_zone2
> ACPI: Thermal Zone [CPUZ] (39 C)
> thermal LNXTHERM:04: registered as thermal_zone3
> ACPI: Thermal Zone [LOCZ] (37 C)
> thermal LNXTHERM:05: registered as thermal_zone4
> ACPI: Thermal Zone [SKNZ] (36 C)
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
> agpgart-intel 0000:00:00.0: detected 65532K stolen memory
> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> serial 0000:00:03.3: enabling device (0000 -> 0003)
> serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> 0000:00:03.3: ttyS0 at I/O 0x4120 (irq = 17) is a 16550A
> brd: module loaded
> loop: module loaded
> input: Macintosh mouse button emulation as /devices/virtual/input/input3
> Driver 'sd' needs updating - please use bus_type methods
> Driver 'sr' needs updating - please use bus_type methods
> ahci 0000:00:1f.2: version 3.0
> alloc irq_desc for 21 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> alloc irq_desc for 27 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
> ahci: SSS flag set, parallel bus scan disabled
> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
> ahci 0000:00:1f.2: setting latency timer to 64
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> ata1: SATA max UDMA/133 abar m2048@0x94826000 port 0x94826100 irq 27
> ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 27
> ata3: DUMMY
> ata4: DUMMY
> Fixed MDIO Bus: probed
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd 0000:00:1a.7: enabling device (0000 -> 0002)
> alloc irq_desc for 19 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> ehci_hcd 0000:00:1a.7: EHCI Host Controller
> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1a.7: debug port 1
> ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94826c00
> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 ehci_hcd
> usb usb1: SerialNumber: 0000:00:1a.7
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 6 ports detected
> ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
> alloc irq_desc for 20 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1d.7: irq 20, io mem 0x94826800
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 ehci_hcd
> usb usb2: SerialNumber: 0000:00:1d.7
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 6 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> uhci_hcd 0000:00:1a.0: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: UHCI Host Controller
> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040c0
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb3: SerialNumber: 0000:00:1a.0
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> uhci_hcd 0000:00:1a.1: UHCI Host Controller
> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1a.1: irq 17, io base 0x000040a0
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb4: SerialNumber: 0000:00:1a.1
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1a.2: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1a.2: setting latency timer to 64
> uhci_hcd 0000:00:1a.2: UHCI Host Controller
> uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004080
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb5: SerialNumber: 0000:00:1a.2
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: UHCI Host Controller
> usb usb6: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb6: SerialNumber: 0000:00:1d.0
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
> alloc irq_desc for 22 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040
> usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb7: Product: UHCI Host Controller
> usb usb7: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb7: SerialNumber: 0000:00:1d.1
> usb usb7: configuration #1 chosen from 1 choice
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020
> usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb8: Product: UHCI Host Controller
> usb usb8: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb8: SerialNumber: 0000:00:1d.2
> usb usb8: configuration #1 chosen from 1 choice
> hub 8-0:1.0: USB hub found
> hub 8-0:1.0: 2 ports detected
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> rtc_cmos 00:08: RTC can wake from S4
> rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
> cpuidle: using governor ladder
> cpuidle: using governor menu
> EFI Variables Facility v0.08 2004-May-17
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> ACPI: Battery Slot [BAT0] (battery present)
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> PM: Resume from disk failed.
> registered taskstats version 1
> Magic number: 13:720:938
> Initalizing network drop monitor service
> usb 1-2: new high speed USB device using ehci_hcd and address 3
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata1.00: ATA-8: SAMSUNG HS08XJF, 3AA10050, max UDMA/100
> ata1.00: 156301488 sectors, multi 16: LBA48
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS08XJF 3AA1 PQ: 0 ANSI: 5
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
> usb 1-2: New USB device found, idVendor=03f0, idProduct=201d
> usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> usb 1-2: Product: HP un2400 Mobile Broadband Module
> usb 1-2: Manufacturer: HP un2400 Mobile Broadband Module
> usb 1-2: configuration #1 chosen from 1 choice
> sd 0:0:0:0: [sda] Attached SCSI disk
> input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
> usb 1-5: new high speed USB device using ehci_hcd and address 5
> Clocksource tsc unstable (delta = -213797952 ns)
> usb 1-5: New USB device found, idVendor=04f2, idProduct=b082
> usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
> usb 1-5: Product: CKA7227
> usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
> usb 1-5: SerialNumber: SN0001
> usb 1-5: configuration #1 chosen from 1 choice
> usb 3-1: new full speed USB device using uhci_hcd and address 2
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.81, max UDMA/100
> ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata2.00: configured for UDMA/100
> usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
> usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-1: Product: HP Integrated Module
> usb 3-1: Manufacturer: Broadcom Corp
> usb 3-1: configuration #1 chosen from 1 choice
> scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.81 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> Freeing unused kernel memory: 1348k freed
> Write protecting the kernel read-only data: 6728k
> Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000
> input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
> usb 4-1: new full speed USB device using uhci_hcd and address 2
> usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
> usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> usb 4-1: Product: Fingerprint Sensor
> usb 4-1: configuration #1 chosen from 1 choice
> [drm] Initialized drm 1.1.0 20060810
> i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> i915 0000:00:02.0: setting latency timer to 64
> alloc irq_desc for 28 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> i915 0000:00:02.0: irq 28 for MSI/MSI-X
> [drm] TV-13: set mode NTSC 480i 0
> allocated 1280x800 fb: 0x04020000, bo ffff8800778e3a80
> Console: switching to colour frame buffer device 160x50
> [drm] LVDS-8: set mode 1280x800 15
> fb0: inteldrmfb frame buffer device
> registered panic notifier
> acpi device:07: registered as cooling_device2
> input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input7
> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> type=1404 audit(1255960606.220:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> SELinux: 8192 avtab hash slots, 130119 rules.
> SELinux: 8192 avtab hash slots, 130119 rules.
> SELinux: 8 users, 12 roles, 2769 types, 129 bools, 1 sens, 1024 cats
> SELinux: 74 classes, 130119 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev sda1, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> type=1403 audit(1255960606.737:3): policy loaded auid=4294967295 ses=4294967295
> udev: starting version 141
> usbcore: registered new interface driver usbserial
> USB Serial support registered for generic
> usbcore: registered new interface driver usbserial_generic
> usbserial: USB Serial Driver core
> USB Serial support registered for Qualcomm USB modem
> qcserial 1-2:1.0: Qualcomm USB modem converter detected
> usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0
> usbcore: registered new interface driver qcserial
> Linux video capture interface: v2.00
> uvcvideo: Found UVC 1.00 device CKA7227 (04f2:b082)
> input: CKA7227 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input8
> usbcore: registered new interface driver uvcvideo
> USB Video Class driver (v0.1.0)
> cfg80211: Calling CRDA to update world regulatory domain
> Bluetooth: Core ver 2.15
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> pata_acpi 0000:00:03.2: enabling device (0000 -> 0001)
> pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pata_acpi 0000:00:03.2: setting latency timer to 64
> pata_acpi 0000:00:03.2: PCI INT C disabled
> ACPI: WMI: Mapper loaded
> iTCO_vendor_support: vendor-support=0
> lib80211: common routines for IEEE802.11 drivers
> lib80211_crypt: registered algorithm 'NULL'
> ricoh-mmc: Ricoh MMC Controller disabling driver
> ricoh-mmc: Copyright(c) Philip Langdale
> ricoh-mmc: Ricoh MMC controller found at 0000:44:06.2 [1180:0843] (rev 12)
> ricoh-mmc: Controller is now disabled.
> input: PC Speaker as /devices/platform/pcspkr/input/input9
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
> iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> lis3lv02d: laptop model unknown, using default axes configuration
> lis3lv02d: 1-byte sensor found
> input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
> lis3_init_device: irq 23
> lis3: registering device
> Registered led device: hp::hddprotect
> lis3lv02d driver loaded.
> Bluetooth: Generic Bluetooth USB driver ver 0.5
> usbcore: registered new interface driver btusb
> e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> e1000e 0000:00:19.0: enabling device (0000 -> 0002)
> e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> e1000e 0000:00:19.0: setting latency timer to 64
> alloc irq_desc for 29 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
> tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
> tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
> SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:5a:34:9e:20
> 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
> 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1052ff-0ff
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> sdhci-pci 0000:44:06.1: SDHCI controller found [1180:0822] (rev 22)
> sdhci-pci 0000:44:06.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
> Registered led device: mmc0::
> mmc0: SDHCI controller on PCI [0000:44:06.1] using PIO
> iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
> iwlagn: Copyright(c) 2003-2009 Intel Corporation
> iwlagn 0000:02:00.0: enabling device (0000 -> 0002)
> iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> iwlagn 0000:02:00.0: setting latency timer to 64
> iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
> iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> alloc irq_desc for 30 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> iwlagn 0000:02:00.0: irq 30 for MSI/MSI-X
> firewire_ohci 0000:44:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> firewire_ohci 0000:44:06.0: setting latency timer to 64
> firewire_ohci: Added fw-ohci device 0000:44:06.0, OHCI version 1.10
> phy0: Selected rate control algorithm 'iwl-agn-rs'
> firewire_core: created device fw0: GUID 5566778811223344, S400
> HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
> cfg80211: World regulatory domain updated:
> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> device-mapper: multipath: version 1.0.5 loaded
> EXT3 FS on sda1, internal journal
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev sda3, type vfat), uses genfs_contexts
> Adding 2047992k swap on /dev/sda2. Priority:-1 extents:1 across:2047992k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>
> --
> Matthew Garrett | mjg59@srcf.ucam.org
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Matthew Garrett | mjg59@srcf.ucam.org
next prev parent reply other threads:[~2009-10-20 3:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-20 0:34 [REGRESSION] EFI boot on x86 fails in .32 Matthew Garrett
2009-10-20 3:06 ` Matthew Garrett [this message]
2009-10-20 4:54 ` Feng Tang
2009-10-27 11:39 ` [tip:x86/urgent] x86: Make EFI RTC function depend on 32bit again tip-bot for Feng Tang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091020030656.GA30139@srcf.ucam.org \
--to=mjg59@srcf.ucam.org \
--cc=feng.tang@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.