From: Tony Lindgren <tony@atomide.com>
To: Ladislav Michl <ladis@linux-mips.org>
Cc: linux-omap@vger.kernel.org,
Alexander Shishkin <virtuoso@slind.org>,
Kevin Hilman <khilman@deeprootsystems.com>
Subject: Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
Date: Tue, 20 Oct 2009 15:15:44 -0700 [thread overview]
Message-ID: <20091020221543.GL12576@atomide.com> (raw)
In-Reply-To: <20091020233115.GA7363@localhost.localdomain>
* Ladislav.Michl@seznam.cz <Ladislav.Michl@seznam.cz> [091020 14:53]:
> On Fri, Oct 09, 2009 at 06:46:23PM -0400, Tony Lindgren wrote:
> > This patch has been applied to the linux-omap
> > by youw fwiendly patch wobot.
> >
> > Branch in linux-omap: omap2-upstream
> >
> > Initial commit ID (Likely to change): 439d2c69335a28ffdb5a9795ff384b6755ca0f7f
> >
> > PatchWorks
> > http://patchwork.kernel.org/patch/52477/
> >
> > Git (Likely to change, and takes a while to get mirrored)
> > http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=439d2c69335a28ffdb5a9795ff384b6755ca0f7f
>
> This patch broke all OMAP1 boards. NULL terminator entry for omap1
> serial_platform_data cannot be removed just because serial driver uses
> is as last entry marker. Without it we end this way:
> Unable to handle kernel NULL pointer dereference at virtual address 00000028
> pgd = c0004000
> [00000028] *pgd=00000000
> Internal error: Oops: 80000005 [#1]
> last sysfs file:
> Modules linked in:
> CPU: 0 Not tainted (2.6.32-rc5-06314-g4155da6-dirty #12)
> PC is at 0x28
> LR is at serial8250_config_port+0x184/0xc34
> (...etc...)
>
> Please consider following fix (and while there fix OMAP2 too as patch broke
> it as well (untested))
Thanks, I already refreshed the original patch with the same fix few
days ago :) It should be there in for-next branch and master branch.
Tony
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
>
> diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
> index 9c59332..0392ff5 100644
> --- a/arch/arm/mach-omap1/serial.c
> +++ b/arch/arm/mach-omap1/serial.c
> @@ -86,7 +86,9 @@ static struct plat_serial8250_port serial_platform_data[] = {
> .iotype = UPIO_MEM,
> .regshift = 2,
> .uartclk = OMAP16XX_BASE_BAUD * 16,
> - },
> + }, {
> + }
> +
> };
>
> static struct platform_device serial_device = {
> @@ -119,7 +121,7 @@ void __init omap_serial_init(void)
> serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
> }
>
> - for (i = 0; i < ARRAY_SIZE(serial_platform_data); i++) {
> + for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
> unsigned char reg;
>
> /* Static mapping, never released */
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index dabc089..ca69ffa 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -585,7 +585,7 @@ void __init omap_serial_early_init(void)
> * if not needed.
> */
>
> - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
> + for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) {
> struct omap_uart_state *uart = &omap_uart[i];
> struct platform_device *pdev = &uart->pdev;
> struct device *dev = &pdev->dev;
> @@ -637,7 +637,7 @@ void __init omap_serial_init(void)
> {
> int i;
>
> - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
> + for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) {
> struct omap_uart_state *uart = &omap_uart[i];
> struct platform_device *pdev = &uart->pdev;
> struct device *dev = &pdev->dev;
next prev parent reply other threads:[~2009-10-20 22:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-08 9:59 [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS virtuoso
2009-10-09 16:38 ` Kevin Hilman
2009-10-09 22:46 ` [APPLIED] " Tony Lindgren
2009-10-20 23:53 ` Ladislav.Michl
2009-10-20 22:15 ` Tony Lindgren [this message]
2009-10-20 23:01 ` Tony Lindgren
2009-10-21 0:40 ` Tony Lindgren
2009-10-21 9:48 ` Ladislav.Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091020221543.GL12576@atomide.com \
--to=tony@atomide.com \
--cc=khilman@deeprootsystems.com \
--cc=ladis@linux-mips.org \
--cc=linux-omap@vger.kernel.org \
--cc=virtuoso@slind.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.