From: Christian Borntraeger <borntraeger@de.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Dave Young <hidave.darkstar@gmail.com>,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: [RFC/PATCH] ratelimit: make output more useful
Date: Fri, 23 Oct 2009 14:58:11 +0200 [thread overview]
Message-ID: <200910231458.11832.borntraeger@de.ibm.com> (raw)
In-Reply-To: <20091023113348.GD5886@elte.hu>
Am Freitag 23 Oktober 2009 13:33:48 schrieb Ingo Molnar:
> Mind sending it against latest tip:master (or tip:core/printk):
[...]
> Which has a couple of ratelimit changes queued up already that collide
> with your patch:
Sure, something like the following?
[PATCH] ratelimit: make output more useful
Today I got
[39648.224782] Registered led device: iwl-phy0::TX
[40676.545099] __ratelimit: 246 callbacks suppressed
[40676.545103] abcdef[23675]: segfault at 0 ...
as you can see the ratelimit message contains a function prefix. Since this
is always __ratelimit, this wont help much. This patch changes __ratelimit
and printk_ratelimit to print the function name that calls ratelimit.
This will pinpoint the responsible function, as long as not several different
places call ratelimit with the same ratelimit state at the same time. In that
case we catch only one random function that calls ratelimit after the wait
period.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@elte.hu>
CC: Dave Young <hidave.darkstar@gmail.com>
---
include/linux/kernel.h | 7 ++++++-
include/linux/ratelimit.h | 3 ++-
kernel/printk.c | 9 +--------
lib/ratelimit.c | 6 +++---
4 files changed, 12 insertions(+), 13 deletions(-)
Index: tip/include/linux/kernel.h
===================================================================
--- tip.orig/include/linux/kernel.h
+++ tip/include/linux/kernel.h
@@ -16,6 +16,7 @@
#include <linux/log2.h>
#include <linux/typecheck.h>
#include <linux/dynamic_debug.h>
+#include <linux/ratelimit.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
@@ -332,7 +333,11 @@ asmlinkage int vprintk(const char *fmt,
asmlinkage int printk(const char * fmt, ...)
__attribute__ ((format (printf, 1, 2))) __cold;
-extern int printk_ratelimit(void);
+/*
+ * printk rate limiting, lifted from the networking subsystem.
+ */
+extern struct ratelimit_state printk_ratelimit_state;
+#define printk_ratelimit() ___ratelimit(&printk_ratelimit_state, __func__)
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec);
Index: tip/include/linux/ratelimit.h
===================================================================
--- tip.orig/include/linux/ratelimit.h
+++ tip/include/linux/ratelimit.h
@@ -25,6 +25,7 @@ struct ratelimit_state {
.burst = burst_init, \
}
-extern int __ratelimit(struct ratelimit_state *rs);
+extern int ___ratelimit(struct ratelimit_state *rs, const char *func);
+#define __ratelimit(state) ___ratelimit(state, __func__)
#endif /* _LINUX_RATELIMIT_H */
Index: tip/kernel/printk.c
===================================================================
--- tip.orig/kernel/printk.c
+++ tip/kernel/printk.c
@@ -1370,18 +1370,11 @@ late_initcall(disable_boot_consoles);
#if defined CONFIG_PRINTK
/*
- * printk rate limiting, lifted from the networking subsystem.
- *
* This enforces a rate limit: not more than 10 kernel messages
* every 5s to make a denial-of-service attack impossible.
*/
DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
-
-int printk_ratelimit(void)
-{
- return __ratelimit(&printk_ratelimit_state);
-}
-EXPORT_SYMBOL(printk_ratelimit);
+EXPORT_SYMBOL(printk_ratelimit_state);
/**
* printk_timed_ratelimit - caller-controlled printk ratelimiting
Index: tip/lib/ratelimit.c
===================================================================
--- tip.orig/lib/ratelimit.c
+++ tip/lib/ratelimit.c
@@ -20,7 +20,7 @@
* This enforces a rate limit: not more than @rs->ratelimit_burst callbacks
* in every @rs->ratelimit_jiffies
*/
-int __ratelimit(struct ratelimit_state *rs)
+int ___ratelimit(struct ratelimit_state *rs, const char *func)
{
unsigned long flags;
int ret;
@@ -43,7 +43,7 @@ int __ratelimit(struct ratelimit_state *
if (time_is_before_jiffies(rs->begin + rs->interval)) {
if (rs->missed)
printk(KERN_WARNING "%s: %d callbacks suppressed\n",
- __func__, rs->missed);
+ func, rs->missed);
rs->begin = 0;
rs->printed = 0;
rs->missed = 0;
@@ -59,4 +59,4 @@ int __ratelimit(struct ratelimit_state *
return ret;
}
-EXPORT_SYMBOL(__ratelimit);
+EXPORT_SYMBOL(___ratelimit);
next prev parent reply other threads:[~2009-10-23 12:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-19 15:06 [RFC/PATCH] ratelimit: make output more useful Christian Borntraeger
2009-10-23 11:33 ` Ingo Molnar
2009-10-23 12:58 ` Christian Borntraeger [this message]
2009-10-23 13:11 ` Ingo Molnar
2009-10-23 14:51 ` Christian Borntraeger
2009-10-23 14:55 ` Ingo Molnar
2009-10-23 15:12 ` Christian Borntraeger
2009-10-23 21:17 ` Joe Perches
2009-10-24 1:04 ` [tip:branch?] ratelimit: Make suppressed output messages " tip-bot for Christian Borntraeger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200910231458.11832.borntraeger@de.ibm.com \
--to=borntraeger@de.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=hidave.darkstar@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.