From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Tue, 3 Nov 2009 08:36:56 +0100
From: "gwenhael.goavec" <gwen@domain.hid>
Message-ID: <20091103083656.2009150a@domain.hid>
In-Reply-To: <4AEF5D4B.2090106@domain.hid>
References: <20091020113724.9069.23594.stgit@domain.hid>
	<20091020113725.9069.28060.stgit@domain.hid>
	<1256404942.2862.498.camel@domain.hid>
	<1257177854.2065.616.camel@domain.hid>
	<4AEF0BCC.2020208@domain.hid>
	<1257180716.2065.618.camel@domain.hid>
	<4AEF0F7F.2060603@domain.hid> <4AEF1E91.6030407@domain.hid>
	<4AEF22C3.4070303@domain.hid> <4AEF273B.3090402@domain.hid>
	<20091102201924.5f392e15@domain.hid> <4AEF5D4B.2090106@domain.hid>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] Xenomai on ARMadeus
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: xenomai@xenomai.org

On Mon, 02 Nov 2009 23:29:31 +0100
Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
wrote:

> gwenhael.goavec wrote:
> > On Mon, 02 Nov 2009 19:38:51 +0100
> > Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
> > wrote:
> > 
> >> By the way, did you make any change to the I-pipe patch to get it
> >> running on this board?
> > 
> > The only change realized, is made because Armadeus and
> > I-pipe does the same change on
> > mach-imx/include/mach/imxfb.h :
> > 
> > --- a/arch/arm/mach-imx/include/mach/imxfb.h
> > +++ b/arch/arm/mach-imx/include/mach/imxfb.h
> > @@ -14,7 +14,6 @@
> >  #define PCR_BPIX_8 (3 << 25)
> >  #define PCR_BPIX_12    (4 << 25)
> >  #define PCR_BPIX_16    (4 << 25)
> > +#define PCR_BPIX_MASK   (7 << 25)
> >  #define PCR_PIXPOL (1 << 24)
> >  #define PCR_FLMPOL (1 << 23)
> >  #define PCR_LPPOL  (1 << 22)
> > 
> > I take this opportunity to ask a question:
> > on APF27 with imx27, I found that the system freeze
> > when an interrupt handler is in place and an
> > interruption happens.
> > if interrupt handler is in place without interruption no
> > problems and if interruption happens without interrupt
> > handler it's ok too.
> > 
> > If someone could help or advise me. 
> > thank you very much
> > 
> > Gwenhael
> > 
> > Signed-off-by: gwenhael.goavec-merou@domain.hid
> 
> What version of the I-pipe patch?
> 
> -- 
> 					    Gilles.

Version 1.13-03 for 2.6.29 

Gwenhael

Signed-off-by: gwenhael.goavec-merou@domain.hid