From: Alan Cox <alan@linux.intel.com>
To: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, nico@cam.org
Subject: [PATCH 09/11] sdio_uart: Style fixes
Date: Tue, 03 Nov 2009 14:18:41 +0000 [thread overview]
Message-ID: <20091103141837.31032.24154.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091103141525.31032.45206.stgit@localhost.localdomain>
Running the current code through checkpatch shows a few bits of noise
mostly but not entirely from before the changes.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/mmc/card/sdio_uart.c | 33 +++++++++++++++------------------
1 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 674f3bf..ebb5d4b 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -461,7 +461,8 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
tty = tty_port_tty_get(&port->port);
- if (tty == NULL || !kfifo_len(xmit) || tty->stopped || tty->hw_stopped) {
+ if (tty == NULL || !kfifo_len(xmit)
+ || tty->stopped || tty->hw_stopped) {
sdio_uart_stop_tx(port);
return;
}
@@ -589,7 +590,6 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
{
struct sdio_uart_port *port =
container_of(tport, struct sdio_uart_port, port);
- unsigned long page;
int ret;
/*
@@ -632,7 +632,7 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
*/
sdio_out(port, UART_LCR, UART_LCR_WLEN8);
- port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
+ port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
port->mctrl = TIOCM_OUT2;
sdio_uart_change_speed(port, tty->termios, NULL);
@@ -659,7 +659,6 @@ err1:
return ret;
}
-
/**
* sdio_uart_shutdown - stop hardware
* @tport: tty port to shut down
@@ -674,11 +673,8 @@ static void sdio_uart_shutdown(struct tty_port *tport)
{
struct sdio_uart_port *port =
container_of(tport, struct sdio_uart_port, port);
- int ret;
-
- ret = sdio_uart_claim_func(port);
- if (ret)
- return ret;
+ if (sdio_uart_claim_func(port))
+ return;
sdio_uart_stop_rx(port);
@@ -726,7 +722,6 @@ static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty)
} else
sdio_uart_port_put(port);
return ret;
-
}
/**
@@ -766,7 +761,7 @@ static void sdio_uart_hangup(struct tty_struct *tty)
tty_port_hangup(&port->port);
}
-static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
+static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct sdio_uart_port *port = tty->driver_data;
@@ -777,7 +772,7 @@ static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
ret = kfifo_put(port->xmit_fifo, buf, count);
- if ( !(port->ier & UART_IER_THRI)) {
+ if (!(port->ier & UART_IER_THRI)) {
int err = sdio_uart_claim_func(port);
if (!err) {
sdio_uart_start_tx(port);
@@ -864,7 +859,8 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
sdio_uart_release_func(port);
}
-static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+static void sdio_uart_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct sdio_uart_port *port = tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
@@ -943,7 +939,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
int result;
result = sdio_uart_claim_func(port);
- if(!result) {
+ if (!result) {
sdio_uart_update_mctrl(port, set, clear);
sdio_uart_release_func(port);
}
@@ -961,7 +957,7 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v)
struct sdio_uart_port *port = sdio_uart_port_get(i);
if (port) {
seq_printf(m, "%d: uart:SDIO", i);
- if(capable(CAP_SYS_ADMIN)) {
+ if (capable(CAP_SYS_ADMIN)) {
seq_printf(m, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
if (port->icount.frame)
@@ -1014,7 +1010,7 @@ static const struct tty_port_operations sdio_uart_port_ops = {
.shutdown = sdio_uart_shutdown,
.activate = sdio_uart_activate,
};
-
+
static const struct tty_operations sdio_uart_ops = {
.open = sdio_uart_open,
.close = sdio_uart_close,
@@ -1067,7 +1063,7 @@ static int sdio_uart_probe(struct sdio_func *func,
}
if (!tpl) {
printk(KERN_WARNING
- "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+ "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
sdio_func_id(func));
kfree(port);
return -EINVAL;
@@ -1100,7 +1096,8 @@ static int sdio_uart_probe(struct sdio_func *func,
kfree(port);
} else {
struct device *dev;
- dev = tty_register_device(sdio_uart_tty_driver, port->index, &func->dev);
+ dev = tty_register_device(sdio_uart_tty_driver,
+ port->index, &func->dev);
if (IS_ERR(dev)) {
sdio_uart_port_remove(port);
ret = PTR_ERR(dev);
next prev parent reply other threads:[~2009-11-03 14:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-03 14:17 [PATCH 00/11] Sort out sdio_uart - stage two Alan Cox
2009-11-03 14:17 ` [PATCH 01/11] tty_port: Move hupcl handling Alan Cox
2009-11-03 14:17 ` [PATCH 02/11] sdio_uart: use tty_port Alan Cox
2009-11-03 14:17 ` [PATCH 03/11] sdio_uart: Fix oops caused by the previous changeset Alan Cox
2009-11-03 14:17 ` [PATCH 04/11] sdio_uart: refcount the tty objects Alan Cox
2009-11-03 14:18 ` [PATCH 05/11] sdio_uart: Move the open lock Alan Cox
2009-11-03 14:18 ` [PATCH 06/11] sdio_uart: Switch to the open/close helpers Alan Cox
2009-11-03 14:18 ` [PATCH 07/11] sdio_uart: Fix termios handling Alan Cox
2009-11-03 14:18 ` [PATCH 08/11] sdio_uart: Use kfifo instead of the messy circ stuff Alan Cox
2009-11-03 14:18 ` Alan Cox [this message]
2009-11-03 14:18 ` [PATCH 10/11] sdio_uart: Fix the locking on "func" for new code Alan Cox
2009-11-03 14:19 ` [PATCH 11/11] sdio_uart: add modem functionality Alan Cox
2009-11-03 19:58 ` [PATCH 00/11] Sort out sdio_uart - stage two Nicolas Pitre
2009-11-04 0:54 ` Alan Cox
2009-11-04 1:48 ` Nicolas Pitre
-- strict thread matches above, loose matches on Subject: below --
2009-11-18 14:18 [PATCH 00/11] Series short description Alan Cox
2009-11-18 14:20 ` [PATCH 09/11] sdio_uart: Style fixes Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091103141837.31032.24154.stgit@localhost.localdomain \
--to=alan@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=nico@cam.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.