From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Ivo van Doorn <ivdoorn@gmail.com>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Gertjan van Wingerde <gwingerde@gmail.com>,
linux-kernel@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH 35/41] rt2800: prepare for rt2800lib addition
Date: Wed, 04 Nov 2009 18:36:17 +0100 [thread overview]
Message-ID: <20091104173617.28463.6733.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20091104173151.28463.68742.sendpatchset@localhost.localdomain>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] rt2800: prepare for rt2800lib addition
Part of preparations for later code unification.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 103 +++++++++++++-----------
drivers/net/wireless/rt2x00/rt2800usb.c | 134 +++++++++++++++++---------------
2 files changed, 133 insertions(+), 104 deletions(-)
Index: b/drivers/net/wireless/rt2x00/rt2800pci.c
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -97,7 +97,8 @@ static void rt2800pci_bbp_write(struct r
rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
- rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
+ if (rt2x00_intf_is_pci(rt2x00dev))
+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
}
@@ -125,7 +126,8 @@ static void rt2800pci_bbp_read(struct rt
rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
- rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
+ if (rt2x00_intf_is_pci(rt2x00dev))
+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
@@ -253,12 +255,14 @@ static void rt2800pci_mcu_request(struct
{
u32 reg;
- /*
- * RT2880 and RT3052 don't support MCU requests.
- */
- if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
- rt2x00_rt(&rt2x00dev->chip, RT3052))
- return;
+ if (rt2x00_intf_is_pci(rt2x00dev)) {
+ /*
+ * RT2880 and RT3052 don't support MCU requests.
+ */
+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
+ rt2x00_rt(&rt2x00dev->chip, RT3052))
+ return;
+ }
mutex_lock(&rt2x00dev->csr_mutex);
@@ -814,7 +818,8 @@ static void rt2800pci_config_ant(struct
switch ((int)ant->tx) {
case 1:
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
- rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+ if (rt2x00_intf_is_pci(rt2x00dev))
+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
break;
case 2:
rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
@@ -1480,7 +1485,8 @@ static int rt2800pci_init_registers(stru
u32 reg;
unsigned int i;
- rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+ if (rt2x00_intf_is_pci(rt2x00dev))
+ rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
@@ -1803,7 +1809,8 @@ static int rt2800pci_init_bbp(struct rt2
if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
rt2800_bbp_write(rt2x00dev, 84, 0x19);
- if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+ if (rt2x00_intf_is_pci(rt2x00dev) &&
+ rt2x00_rt(&rt2x00dev->chip, RT3052)) {
rt2800_bbp_write(rt2x00dev, 31, 0x08);
rt2800_bbp_write(rt2x00dev, 78, 0x0e);
rt2800_bbp_write(rt2x00dev, 80, 0x08);
@@ -1887,10 +1894,12 @@ static int rt2800pci_init_rfcsr(struct r
u8 rfcsr;
u8 bbp;
- if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3022))
- return 0;
+ if (rt2x00_intf_is_pci(rt2x00dev)) {
+ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3022))
+ return 0;
+ }
/*
* Init RF calibration.
@@ -1902,36 +1911,38 @@ static int rt2800pci_init_rfcsr(struct r
rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
- rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
- rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
- rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
- rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
- rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
- rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
- rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
- rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
- rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
- rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
- rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
- rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
- rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
- rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
- rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
- rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
- rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
- rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
- rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
- rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
- rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
- rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
- rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
- rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
- rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
- rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
- rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
- rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
- rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
- rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
+ if (rt2x00_intf_is_pci(rt2x00dev)) {
+ rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
+ rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
+ rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
+ rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
+ rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
+ rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
+ rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
+ rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
+ rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
+ rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
+ rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
+ rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
+ rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
+ rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+ rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
+ rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
+ }
/*
* Set RX Filter calibration for 20MHz and 40MHz
@@ -3005,6 +3016,8 @@ static int rt2800pci_probe_hw(struct rt2
{
int retval;
+ rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
+
rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops;
/*
Index: b/drivers/net/wireless/rt2x00/rt2800usb.c
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1050,7 +1050,8 @@ static void rt2800usb_link_stats(struct
static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
{
if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
- if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+ if (rt2x00_intf_is_usb(rt2x00dev) &&
+ rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
return 0x1c + (2 * rt2x00dev->lna_gain);
else
return 0x2e + rt2x00dev->lna_gain;
@@ -1285,33 +1286,38 @@ static int rt2800usb_init_registers(stru
u32 reg;
unsigned int i;
- /*
- * Wait untill BBP and RF are ready.
- */
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
- if (reg && reg != ~0)
- break;
- msleep(1);
- }
+ if (rt2x00_intf_is_usb(rt2x00dev)) {
+ /*
+ * Wait untill BBP and RF are ready.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2800_register_read(rt2x00dev, MAC_CSR0, ®);
+ if (reg && reg != ~0)
+ break;
+ msleep(1);
+ }
- if (i == REGISTER_BUSY_COUNT) {
- ERROR(rt2x00dev, "Unstable hardware.\n");
- return -EBUSY;
- }
+ if (i == REGISTER_BUSY_COUNT) {
+ ERROR(rt2x00dev, "Unstable hardware.\n");
+ return -EBUSY;
+ }
- rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
+ rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
+ rt2800_register_write(rt2x00dev, PBF_SYS_CTRL,
+ reg & ~0x00002000);
+ }
rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
- rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+ if (rt2x00_intf_is_usb(rt2x00dev)) {
+ rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
- rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
- USB_MODE_RESET, REGISTER_TIMEOUT);
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+ USB_MODE_RESET, REGISTER_TIMEOUT);
+ }
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
@@ -1343,7 +1349,8 @@ static int rt2800usb_init_registers(stru
rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+ if (rt2x00_intf_is_usb(rt2x00dev) &&
+ rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -1461,19 +1468,21 @@ static int rt2800usb_init_registers(stru
rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
- rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+ if (rt2x00_intf_is_usb(rt2x00dev)) {
+ rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
- rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
- rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
- rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+ rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
+ rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
+ rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+ }
rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
@@ -1519,9 +1528,11 @@ static int rt2800usb_init_registers(stru
rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
- rt2800_register_read(rt2x00dev, USB_CYC_CFG, ®);
- rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30);
- rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
+ if (rt2x00_intf_is_usb(rt2x00dev)) {
+ rt2800_register_read(rt2x00dev, USB_CYC_CFG, ®);
+ rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30);
+ rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
+ }
rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®);
rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0);
@@ -1650,11 +1661,11 @@ static int rt2800usb_init_bbp(struct rt2
rt2800_bbp_write(rt2x00dev, 73, 0x12);
}
- if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) {
+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
rt2800_bbp_write(rt2x00dev, 84, 0x19);
- }
- if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+ if (rt2x00_intf_is_usb(rt2x00dev) &&
+ rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
rt2800_bbp_write(rt2x00dev, 70, 0x0a);
rt2800_bbp_write(rt2x00dev, 84, 0x99);
rt2800_bbp_write(rt2x00dev, 105, 0x05);
@@ -1738,7 +1749,8 @@ static int rt2800usb_init_rfcsr(struct r
u8 rfcsr;
u8 bbp;
- if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+ if (rt2x00_intf_is_usb(rt2x00dev) &&
+ rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
return 0;
/*
@@ -1751,26 +1763,28 @@ static int rt2800usb_init_rfcsr(struct r
rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
- rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
- rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
- rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
- rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
- rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
- rt2800_rfcsr_write(rt2x00dev, 10, 0x71);
- rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
- rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
- rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
- rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
- rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
- rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
- rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
- rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
- rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
- rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
- rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
- rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
- rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
- rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
+ if (rt2x00_intf_is_usb(rt2x00dev)) {
+ rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
+ rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
+ rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0x71);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
+ rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
+ rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
+ rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
+ rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
+ rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
+ rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
+ }
/*
* Set RX Filter calibration for 20MHz and 40MHz
@@ -2644,6 +2658,8 @@ static int rt2800usb_probe_hw(struct rt2
{
int retval;
+ rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
+
rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops;
/*
next prev parent reply other threads:[~2009-11-04 17:36 UTC|newest]
Thread overview: 151+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-04 17:31 [PATCH 00/41] rewritten rt2800 drivers Bartlomiej Zolnierkiewicz
2009-11-04 17:31 ` [PATCH 01/41] rt2800usb: make Kconfig help entry more helpful Bartlomiej Zolnierkiewicz
2009-11-04 18:22 ` Gertjan van Wingerde
2009-11-05 18:40 ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 02/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 18:26 ` Gertjan van Wingerde
2009-11-06 16:13 ` Bartlomiej Zolnierkiewicz
2009-11-06 19:53 ` Gertjan van Wingerde
2009-11-05 18:41 ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 03/41] rt2800usb: fix rt2800usb_rfcsr_read() Bartlomiej Zolnierkiewicz
2009-11-04 18:28 ` Gertjan van Wingerde
2009-11-05 18:41 ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 04/41] rt2800pci: fix crypto in TX frame Bartlomiej Zolnierkiewicz
2009-11-04 18:30 ` Gertjan van Wingerde
2009-11-05 18:41 ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 05/41] rt2800pci: fix comment about register access Bartlomiej Zolnierkiewicz
2009-11-04 18:34 ` Gertjan van Wingerde
2009-11-05 18:41 ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 06/41] rt2800pci: fix comment about IV/EIV fields Bartlomiej Zolnierkiewicz
2009-11-04 18:36 ` Gertjan van Wingerde
2009-11-05 18:41 ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 07/41] rt2x00: fix rt2x00usb_register_read() comment Bartlomiej Zolnierkiewicz
2009-11-04 18:43 ` Gertjan van Wingerde
2009-11-05 18:42 ` Ivo van Doorn
2009-11-04 17:32 ` [PATCH 08/41] rt2800usb: use rt2x00usb_register_multiwrite() to set key entries Bartlomiej Zolnierkiewicz
2009-11-04 18:44 ` Gertjan van Wingerde
2009-11-04 18:44 ` Gertjan van Wingerde
2009-11-05 18:42 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 09/41] rt2800usb: add rt2800_register_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:08 ` Gertjan van Wingerde
2009-11-04 19:08 ` Gertjan van Wingerde
2009-11-05 18:44 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 10/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:16 ` Gertjan van Wingerde
2009-11-04 19:16 ` Gertjan van Wingerde
2009-11-06 16:13 ` Bartlomiej Zolnierkiewicz
2009-11-06 19:55 ` Gertjan van Wingerde
2009-11-05 18:45 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 11/41] rt2800usb: add rt2800_register_multi[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:18 ` Gertjan van Wingerde
2009-11-04 19:18 ` Gertjan van Wingerde
2009-11-05 18:46 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 12/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:20 ` Gertjan van Wingerde
2009-11-04 19:20 ` Gertjan van Wingerde
2009-11-05 18:47 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 13/41] rt2800usb: add rt2800_regbusy_read() wrapper Bartlomiej Zolnierkiewicz
2009-11-04 19:21 ` Gertjan van Wingerde
2009-11-05 18:49 ` Ivo van Doorn
2009-11-06 16:23 ` Bartlomiej Zolnierkiewicz
2009-11-06 18:20 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 14/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:24 ` Gertjan van Wingerde
2009-11-05 18:49 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 15/41] rt2800usb: add rt2800_bbp_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:30 ` Gertjan van Wingerde
2009-11-05 18:50 ` Ivo van Doorn
2009-11-04 17:33 ` [PATCH 16/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:31 ` Gertjan van Wingerde
2009-11-05 18:50 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 17/41] rt2800usb: add rt2800_rfcsr_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:34 ` Gertjan van Wingerde
2009-11-05 18:50 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 18/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:44 ` Gertjan van Wingerde
2009-11-05 18:50 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 19/41] rt2800usb: add rt2800_rf_[read,write]() wrappers Bartlomiej Zolnierkiewicz
2009-11-04 19:46 ` Gertjan van Wingerde
2009-11-05 18:51 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 20/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:47 ` Gertjan van Wingerde
2009-11-05 18:51 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 21/41] rt2800usb: add rt2800_mcu_request() wrapper Bartlomiej Zolnierkiewicz
2009-11-04 19:48 ` Gertjan van Wingerde
2009-11-05 18:51 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 22/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 20:21 ` Gertjan van Wingerde
2009-11-05 18:52 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 23/41] rt2x00: add driver private field to struct rt2x00_dev Bartlomiej Zolnierkiewicz
2009-11-04 19:55 ` Gertjan van Wingerde
2009-11-04 19:55 ` Gertjan van Wingerde
2009-11-05 18:52 ` Ivo van Doorn
2009-11-05 18:57 ` Ivo van Doorn
2009-11-06 16:27 ` Bartlomiej Zolnierkiewicz
2009-11-06 18:22 ` Ivo van Doorn
2009-11-04 17:34 ` [PATCH 24/41] rt2800usb: convert to use struct rt2800_ops methods Bartlomiej Zolnierkiewicz
2009-11-04 20:22 ` Gertjan van Wingerde
2009-11-05 18:53 ` Ivo van Doorn
2009-11-05 18:57 ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 25/41] rt2800pci: " Bartlomiej Zolnierkiewicz
2009-11-04 19:56 ` Gertjan van Wingerde
2009-11-05 18:57 ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 26/41] rt2x00: fix rt2x00usb_register_multiwrite() arguments Bartlomiej Zolnierkiewicz
2009-11-04 19:59 ` Gertjan van Wingerde
2009-11-04 19:59 ` Gertjan van Wingerde
2009-11-05 18:58 ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 27/41] rt2x00: fix rt2x00usb_regbusy_read() arguments Bartlomiej Zolnierkiewicz
2009-11-04 20:01 ` Gertjan van Wingerde
2009-11-05 18:59 ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 28/41] rt2x00: fix rt2x00pci_register_multi[read,write]() arguments Bartlomiej Zolnierkiewicz
2009-11-04 20:04 ` Gertjan van Wingerde
2009-11-04 20:04 ` Gertjan van Wingerde
2009-11-05 18:59 ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 29/41] rt2800: add rt2800lib.h Bartlomiej Zolnierkiewicz
2009-11-04 20:09 ` Gertjan van Wingerde
2009-11-05 19:00 ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 30/41] rt2800usb: fix comments in rt2800usb.h Bartlomiej Zolnierkiewicz
2009-11-04 20:12 ` Gertjan van Wingerde
2009-11-05 19:01 ` Ivo van Doorn
2009-11-04 17:35 ` [PATCH 31/41] rt2800usb: add RXINFO_DESC_SIZE definition Bartlomiej Zolnierkiewicz
2009-11-05 19:02 ` Ivo van Doorn
2009-11-05 20:33 ` Gertjan van Wingerde
2009-11-04 17:35 ` [PATCH 32/41] rt2800: fix duplication in header files Bartlomiej Zolnierkiewicz
2009-11-05 19:04 ` Ivo van Doorn
2009-11-05 20:37 ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 33/41] rt2800: fix comments in rt2800.h Bartlomiej Zolnierkiewicz
2009-11-05 19:05 ` Ivo van Doorn
2009-11-05 20:38 ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 34/41] rt2x00: add support for different chipset interfaces Bartlomiej Zolnierkiewicz
2009-11-05 19:06 ` Ivo van Doorn
2009-11-05 20:39 ` Gertjan van Wingerde
2009-11-04 17:36 ` Bartlomiej Zolnierkiewicz [this message]
2009-11-05 19:07 ` [PATCH 35/41] rt2800: prepare for rt2800lib addition Ivo van Doorn
2009-11-05 20:43 ` Gertjan van Wingerde
2009-11-06 18:24 ` Ivo van Doorn
2009-11-04 17:36 ` [PATCH 36/41] rt2800: add rt2800lib (part one) Bartlomiej Zolnierkiewicz
2009-11-05 19:09 ` Ivo van Doorn
2009-11-05 20:44 ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 37/41] rt2x00: remove needless ifdefs from rt2x00leds.h Bartlomiej Zolnierkiewicz
2009-11-05 19:09 ` Ivo van Doorn
2009-11-05 20:45 ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 38/41] rt2800: add rt2800lib (part two) Bartlomiej Zolnierkiewicz
2009-11-05 19:10 ` Ivo van Doorn
2009-11-05 20:50 ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 39/41] rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h Bartlomiej Zolnierkiewicz
2009-11-05 19:10 ` Ivo van Doorn
2009-11-05 20:51 ` Gertjan van Wingerde
2009-11-04 17:36 ` [PATCH 40/41] rt2800: add rt2800lib (part three) Bartlomiej Zolnierkiewicz
2009-11-05 19:11 ` Ivo van Doorn
2009-11-05 20:56 ` Gertjan van Wingerde
2009-11-04 17:37 ` [PATCH 41/41] rt2800: add rt2800lib (part four) Bartlomiej Zolnierkiewicz
2009-11-05 19:12 ` Ivo van Doorn
2009-11-05 20:57 ` Gertjan van Wingerde
2009-11-04 20:19 ` [PATCH 00/41] rewritten rt2800 drivers Gertjan van Wingerde
2009-11-04 22:55 ` Julian Calaby
2009-11-06 18:15 ` Bartlomiej Zolnierkiewicz
2009-11-05 20:59 ` Gertjan van Wingerde
2009-11-05 21:06 ` Luis R. Rodriguez
2009-11-05 21:17 ` Gertjan van Wingerde
2009-11-06 16:28 ` Bartlomiej Zolnierkiewicz
2009-11-06 19:56 ` Gertjan van Wingerde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091104173617.28463.6733.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=gwingerde@gmail.com \
--cc=ivdoorn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.