From: Tony Lindgren <tony@atomide.com>
To: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Cc: linux-omap@vger.kernel.org
Subject: Re: [v3, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
Date: Mon, 16 Nov 2009 14:25:18 -0800 [thread overview]
Message-ID: <20091116222517.GT3684@atomide.com> (raw)
* Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [091116 20:40]:
> The patch corrects the issue introduced with my previous patch:
> "OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set"
> as pointed out by OMAP subsystem maintainer.
>
> Created and tested against linux-omap for-next,
> commit 155a75d9725e66e5ec8a383822957dee52427057
Oops, looks like this needs one more update. This breaks building
for mach-omap2 machines:
arch/arm/plat-omap/dma.c: In function 'omap_dma_running':
arch/arm/plat-omap/dma.c:1132: error: 'OMAP_LCDC_CONTROL' undeclared (first use in this function)
arch/arm/plat-omap/dma.c:1132: error: (Each undeclared identifier is reported only once
arch/arm/plat-omap/dma.c:1132: error: for each function it appears in.)
arch/arm/plat-omap/dma.c:1132: error: 'OMAP_LCDC_CTRL_LCD_EN' undeclared (first use in this function)
So removing from omap for-next.
Regards,
Tony
> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
>
> ---
> This version creates a new OMAP1 machine specific header file instead of
> modifying an OMAP platform common one.
>
> Thanks,
> Janusz
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> diff -uprN a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
> --- a/arch/arm/mach-omap1/include/mach/lcdc.h 1970-01-01 01:00:00.000000000 +0100
> +++ b/arch/arm/mach-omap1/include/mach/lcdc.h 2009-11-16 21:13:33.000000000 +0100
> @@ -0,0 +1,59 @@
> +/*
> + * Header file for OMAP1 internal LCD controller
> + *
> + * Extracted from drivers/video/omap/lcdc.c
> + *
> + * Copyright (C) 2004 Nokia Corporation
> + * Author: Imre Deak <imre.deak@nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + */
> +
> +#ifndef __ARCH_OMAP_LCDC_H__
> +#define __ARCH_OMAP_LCDC_H__
> +
> +#define OMAP_LCDC_BASE 0xfffec000
> +#define OMAP_LCDC_SIZE 256
> +#define OMAP_LCDC_IRQ INT_LCD_CTRL
> +
> +#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00)
> +#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04)
> +#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08)
> +#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c)
> +#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10)
> +#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14)
> +#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18)
> +#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c)
> +
> +#define OMAP_LCDC_STAT_DONE (1 << 0)
> +#define OMAP_LCDC_STAT_VSYNC (1 << 1)
> +#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2)
> +#define OMAP_LCDC_STAT_ABC (1 << 3)
> +#define OMAP_LCDC_STAT_LINE_INT (1 << 4)
> +#define OMAP_LCDC_STAT_FUF (1 << 5)
> +#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6)
> +
> +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
> +#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7)
> +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10)
> +
> +#define OMAP_LCDC_IRQ_VSYNC (1 << 2)
> +#define OMAP_LCDC_IRQ_DONE (1 << 3)
> +#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4)
> +#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5)
> +#define OMAP_LCDC_IRQ_LINE (1 << 6)
> +#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2)
> +
> +#endif
> diff -uprN a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
> --- a/arch/arm/plat-omap/dma.c 2009-11-14 23:48:41.000000000 +0100
> +++ b/arch/arm/plat-omap/dma.c 2009-11-16 21:14:50.000000000 +0100
> @@ -36,6 +36,10 @@
>
> #include <plat/tc.h>
>
> +#ifdef CONFIG_ARCH_OMAP1
> +#include <mach/lcdc.h>
> +#endif
> +
> #undef DEBUG
>
> #ifndef CONFIG_ARCH_OMAP1
> @@ -1125,7 +1129,7 @@ int omap_dma_running(void)
> * when it gets enabled, so assume DMA running if LCD enabled.
> */
> if (cpu_is_omap1510())
> - if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
> + if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
> return 1;
>
> /* Check if LCD DMA is running */
> diff -uprN a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
> --- a/drivers/video/omap/lcdc.c 2009-11-14 23:49:16.000000000 +0100
> +++ b/drivers/video/omap/lcdc.c 2009-11-16 21:10:53.000000000 +0100
> @@ -31,6 +31,7 @@
>
> #include <plat/dma.h>
> #include <plat/omapfb.h>
> +#include <mach/lcdc.h>
>
> #include <asm/mach-types.h>
>
> @@ -38,38 +39,6 @@
>
> #define MODULE_NAME "lcdc"
>
> -#define OMAP_LCDC_BASE 0xfffec000
> -#define OMAP_LCDC_SIZE 256
> -#define OMAP_LCDC_IRQ INT_LCD_CTRL
> -
> -#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00)
> -#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04)
> -#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08)
> -#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c)
> -#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10)
> -#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14)
> -#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18)
> -#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c)
> -
> -#define OMAP_LCDC_STAT_DONE (1 << 0)
> -#define OMAP_LCDC_STAT_VSYNC (1 << 1)
> -#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2)
> -#define OMAP_LCDC_STAT_ABC (1 << 3)
> -#define OMAP_LCDC_STAT_LINE_INT (1 << 4)
> -#define OMAP_LCDC_STAT_FUF (1 << 5)
> -#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6)
> -
> -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
> -#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7)
> -#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10)
> -
> -#define OMAP_LCDC_IRQ_VSYNC (1 << 2)
> -#define OMAP_LCDC_IRQ_DONE (1 << 3)
> -#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4)
> -#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5)
> -#define OMAP_LCDC_IRQ_LINE (1 << 6)
> -#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2)
> -
> #define MAX_PALETTE_SIZE PAGE_SIZE
>
> enum lcdc_load_mode {
next reply other threads:[~2009-11-16 22:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-16 22:25 Tony Lindgren [this message]
2009-11-16 22:46 ` [v3, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register Janusz Krzysztofik
2009-11-16 23:13 ` [PATCH v4, " Janusz Krzysztofik
2009-11-17 0:16 ` Tony Lindgren
2009-11-17 0:38 ` Janusz Krzysztofik
2009-11-17 1:24 ` Tony Lindgren
2009-11-17 10:45 ` Janusz Krzysztofik
2009-11-17 11:50 ` Janusz Krzysztofik
2009-11-17 16:10 ` Tony Lindgren
2009-11-24 21:34 ` [PATCH v5] OMAP1: LCD_DMA: " Janusz Krzysztofik
2009-12-05 13:49 ` Janusz Krzysztofik
2009-12-07 21:15 ` Tony Lindgren
2009-12-07 21:14 ` [APPLIED] [PATCH v5] OMAP1: LCD_DMA: Use some define rather than a Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091116222517.GT3684@atomide.com \
--to=tony@atomide.com \
--cc=jkrzyszt@tis.icnet.pl \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.