All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
	Paul Mackerras <paulus@samba.org>,
	Frederic Weisbecker <fweisbec@gmail.com>,
	Arnaldo Carvalho de Melo <acme@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] perf tools: support static build
Date: Sun, 22 Nov 2009 13:27:27 +0200	[thread overview]
Message-ID: <20091122112726.GC13644@redhat.com> (raw)
In-Reply-To: <20091117092331.GA23585@elte.hu>

On Tue, Nov 17, 2009 at 10:23:31AM +0100, Ingo Molnar wrote:
> 
> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > * Michael S. Tsirkin <mst@redhat.com> wrote:
> > 
> > > This makes it possible to build perf statically, by performing make 
> > > LDFLAGS=-static
> > >
> > > Since static libraries are only searched in the order they are 
> > > specified, move library list from LDFLAGS to EXTLIBS, so that they are 
> > > put at the end of linker command line.
> > > 
> > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> > > ---
> > > 
> > > Changes in v2: updated to latest tip.
> > 
> > The Makefile changed again so your v2 patch is conflicting too - mind 
> > updating it to latest -tip?
> 
> i've applied your patch to latest -tip and resolved the conflicts 
> manually. Normal build works, but static one does not yet:
> 
>   aldebaran:~/linux/linux/tools/perf> make -j LDFLAGS=-static
>   Makefile:484: *** No libelf.h/libelf found, please install 
>   libelf-dev/elfutils-libelf-devel and glibc-dev[el].  Stop.
> 
> mind double checking my changes in
> 
>   http://people.redhat.com/mingo/tip.git/README
> 
> Thanks,
> 
> 	Ingo

Looking at it.
For now, here's a patch that shows what went
wrong with configure.

--->

From: Michael S. Tsirkin <mst@redhat.com>
Subject: perf: add V=2 option to help debug config issues

Make standard error show up on console
when V=2 is set.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

--

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 4ec86da..d0bdaf2 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -2,6 +2,7 @@
 all::
 
 # Define V=1 to have a more verbose compile.
+# Define V=2 to have an even more verbose compile.
 #
 # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
 # or vsnprintf() return -1 instead of number of characters which would
@@ -263,7 +264,7 @@ PTHREAD_LIBS = -lpthread
 # explicitly what architecture to check for. Fix this up for yours..
 SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 
-ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null >/dev/null 2>&1 && echo y"), y)
+ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y)
   CFLAGS := $(CFLAGS) -fstack-protector-all
 endif
 
@@ -449,6 +450,11 @@ BUILTIN_OBJS += builtin-kmem.o
 
 PERFLIBS = $(LIB_FILE)
 
+ifeq ($(V), 2)
+	QUIET_STDERR = ">/dev/null"
+else
+	QUIET_STDERR = ">/dev/null 2>&1"
+endif
 #
 # Platform specific tweaks
 #
@@ -476,19 +482,19 @@ ifeq ($(uname_S),Darwin)
 	PTHREAD_LIBS =
 endif
 
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
 	msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
 endif
 
-	ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
+	ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
 		BASIC_CFLAGS += -DLIBELF_NO_MMAP
 	endif
 else
 	msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
 endif
 
-ifneq ($(shell sh -c "(echo '\#include <libdwarf/dwarf.h>'; echo '\#include <libdwarf/libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <libdwarf/dwarf.h>'; echo '\#include <libdwarf/libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
 	msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231);
 	BASIC_CFLAGS += -DNO_LIBDWARF
 else
@@ -500,20 +506,20 @@ endif
 ifdef NO_DEMANGLE
 	BASIC_CFLAGS += -DNO_DEMANGLE
 else
-	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd > /dev/null 2>&1 && echo y")
+	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
 
 	ifeq ($(has_bfd),y)
 		EXTLIBS += -lbfd
 	else
-		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty > /dev/null 2>&1 && echo y")
+		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
 		ifeq ($(has_bfd_iberty),y)
 			EXTLIBS += -lbfd -liberty
 		else
-			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz > /dev/null 2>&1 && echo y")
+			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
 			ifeq ($(has_bfd_iberty_z),y)
 				EXTLIBS += -lbfd -liberty -lz
 			else
-				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty > /dev/null 2>&1 && echo y")
+				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
 				ifeq ($(has_cplus_demangle),y)
 					EXTLIBS += -liberty
 					BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE

  reply	other threads:[~2009-11-22 11:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-29 15:20 [PATCH] perf tools: support static build Michael S. Tsirkin
2009-11-04 11:06 ` Ingo Molnar
2009-11-17  9:23   ` Ingo Molnar
2009-11-22 11:27     ` Michael S. Tsirkin [this message]
2009-11-22 11:39       ` Michael S. Tsirkin
2009-11-22 12:02         ` Ingo Molnar
2009-11-22 12:11           ` Michael S. Tsirkin
2009-11-22 13:02             ` Ingo Molnar
2009-11-22 22:40         ` Paul Mackerras
2009-11-23  8:45           ` Ingo Molnar
2009-11-22 12:06       ` [tip:perf/core] perf tools: Add V=2 option to help debug config issues tip-bot for Michael S. Tsirkin
2009-11-17  9:24 ` [tip:perf/core] perf tools: Support static build tip-bot for Michael S. Tsirkin
  -- strict thread matches above, loose matches on Subject: below --
2009-10-28  7:04 [PATCH] perf tools: support " Michael S. Tsirkin
2009-10-29  8:06 ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091122112726.GC13644@redhat.com \
    --to=mst@redhat.com \
    --cc=a.p.zijlstra@chello.nl \
    --cc=acme@redhat.com \
    --cc=fweisbec@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.