From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: adobriyan@gmail.com, Eric.Moore@lsi.com,
James.Bottomley@HansenPartnership.com
Subject: + mpt-fusion-convert-to-seq_file.patch added to -mm tree
Date: Wed, 25 Nov 2009 13:11:44 -0800 [thread overview]
Message-ID: <200911252111.nAPLBiVf017604@imap1.linux-foundation.org> (raw)
The patch titled
mpt fusion: convert to seq_file
has been added to the -mm tree. Its filename is
mpt-fusion-convert-to-seq_file.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: mpt fusion: convert to seq_file
From: Alexey Dobriyan <adobriyan@gmail.com>
Convert everything except ->proc_info() stuff, it is done withing separate
->proc_info path series.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/message/fusion/mptbase.c | 236 ++++++++++++++---------------
drivers/message/fusion/mptbase.h | 25 ---
2 files changed, 119 insertions(+), 142 deletions(-)
diff -puN drivers/message/fusion/mptbase.c~mpt-fusion-convert-to-seq_file drivers/message/fusion/mptbase.c
--- a/drivers/message/fusion/mptbase.c~mpt-fusion-convert-to-seq_file
+++ a/drivers/message/fusion/mptbase.c
@@ -50,6 +50,7 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
@@ -197,12 +198,9 @@ static int mpt_host_page_access_control(
static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
#ifdef CONFIG_PROC_FS
-static int procmpt_summary_read(char *buf, char **start, off_t offset,
- int request, int *eof, void *data);
-static int procmpt_version_read(char *buf, char **start, off_t offset,
- int request, int *eof, void *data);
-static int procmpt_iocinfo_read(char *buf, char **start, off_t offset,
- int request, int *eof, void *data);
+static const struct file_operations mpt_summary_proc_fops;
+static const struct file_operations mpt_version_proc_fops;
+static const struct file_operations mpt_iocinfo_proc_fops;
#endif
static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
@@ -1717,7 +1715,7 @@ mpt_attach(struct pci_dev *pdev, const s
u8 pcixcmd;
static int mpt_ids = 0;
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *dent, *ent;
+ struct proc_dir_entry *dent;
#endif
ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
@@ -1970,16 +1968,8 @@ mpt_attach(struct pci_dev *pdev, const s
*/
dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
if (dent) {
- ent = create_proc_entry("info", S_IFREG|S_IRUGO, dent);
- if (ent) {
- ent->read_proc = procmpt_iocinfo_read;
- ent->data = ioc;
- }
- ent = create_proc_entry("summary", S_IFREG|S_IRUGO, dent);
- if (ent) {
- ent->read_proc = procmpt_summary_read;
- ent->data = ioc;
- }
+ proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
+ proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
}
#endif
@@ -6528,20 +6518,12 @@ mpt_ioc_reset(MPT_ADAPTER *ioc, int rese
static int
procmpt_create(void)
{
- struct proc_dir_entry *ent;
-
mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
if (mpt_proc_root_dir == NULL)
return -ENOTDIR;
- ent = create_proc_entry("summary", S_IFREG|S_IRUGO, mpt_proc_root_dir);
- if (ent)
- ent->read_proc = procmpt_summary_read;
-
- ent = create_proc_entry("version", S_IFREG|S_IRUGO, mpt_proc_root_dir);
- if (ent)
- ent->read_proc = procmpt_version_read;
-
+ proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
+ proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
return 0;
}
@@ -6561,70 +6543,46 @@ procmpt_destroy(void)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * procmpt_summary_read - Handle read request of a summary file
- * @buf: Pointer to area to write information
- * @start: Pointer to start pointer
- * @offset: Offset to start writing
- * @request: Amount of read data requested
- * @eof: Pointer to EOF integer
- * @data: Pointer
- *
* Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
- * Returns number of characters written to process performing the read.
*/
-static int
-procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
-{
- MPT_ADAPTER *ioc;
- char *out = buf;
- int len;
+static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
- if (data) {
- int more = 0;
-
- ioc = data;
- mpt_print_ioc_summary(ioc, out, &more, 0, 1);
+static int mpt_summary_proc_show(struct seq_file *m, void *v)
+{
+ MPT_ADAPTER *ioc = m->private;
- out += more;
+ if (ioc) {
+ seq_mpt_print_ioc_summary(ioc, m, 1);
} else {
list_for_each_entry(ioc, &ioc_list, list) {
- int more = 0;
-
- mpt_print_ioc_summary(ioc, out, &more, 0, 1);
-
- out += more;
- if ((out-buf) >= request)
- break;
+ seq_mpt_print_ioc_summary(ioc, m, 1);
}
}
- len = out - buf;
+ return 0;
+}
- MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+static int mpt_summary_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_summary_proc_show, PDE(inode)->data);
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * procmpt_version_read - Handle read request from /proc/mpt/version.
- * @buf: Pointer to area to write information
- * @start: Pointer to start pointer
- * @offset: Offset to start writing
- * @request: Amount of read data requested
- * @eof: Pointer to EOF integer
- * @data: Pointer
- *
- * Returns number of characters written to process performing the read.
- */
-static int
-procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
+static const struct file_operations mpt_summary_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_summary_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int mpt_version_proc_show(struct seq_file *m, void *v)
{
u8 cb_idx;
int scsi, fc, sas, lan, ctl, targ, dmp;
char *drvname;
- int len;
- len = sprintf(buf, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
- len += sprintf(buf+len, " Fusion MPT base driver\n");
+ seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
+ seq_printf(m, " Fusion MPT base driver\n");
scsi = fc = sas = lan = ctl = targ = dmp = 0;
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
@@ -6652,98 +6610,97 @@ procmpt_version_read(char *buf, char **s
}
if (drvname)
- len += sprintf(buf+len, " Fusion MPT %s driver\n", drvname);
+ seq_printf(m, " Fusion MPT %s driver\n", drvname);
}
}
- MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+ return 0;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info.
- * @buf: Pointer to area to write information
- * @start: Pointer to start pointer
- * @offset: Offset to start writing
- * @request: Amount of read data requested
- * @eof: Pointer to EOF integer
- * @data: Pointer
- *
- * Returns number of characters written to process performing the read.
- */
-static int
-procmpt_iocinfo_read(char *buf, char **start, off_t offset, int request, int *eof, void *data)
+static int mpt_version_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_version_proc_show, NULL);
+}
+
+static const struct file_operations mpt_version_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_version_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
{
- MPT_ADAPTER *ioc = data;
- int len;
+ MPT_ADAPTER *ioc = m->private;
char expVer[32];
int sz;
int p;
mpt_get_fw_exp_ver(expVer, ioc);
- len = sprintf(buf, "%s:", ioc->name);
+ seq_printf(m, "%s:", ioc->name);
if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
- len += sprintf(buf+len, " (f/w download boot flag set)");
+ seq_printf(m, " (f/w download boot flag set)");
// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
-// len += sprintf(buf+len, " CONFIG_CHECKSUM_FAIL!");
+// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
- len += sprintf(buf+len, "\n ProductID = 0x%04x (%s)\n",
+ seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
ioc->facts.ProductID,
ioc->prod_name);
- len += sprintf(buf+len, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
+ seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
if (ioc->facts.FWImageSize)
- len += sprintf(buf+len, " (fw_size=%d)", ioc->facts.FWImageSize);
- len += sprintf(buf+len, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
- len += sprintf(buf+len, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
- len += sprintf(buf+len, " EventState = 0x%02x\n", ioc->facts.EventState);
+ seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
+ seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
+ seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
+ seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
- len += sprintf(buf+len, " CurrentHostMfaHighAddr = 0x%08x\n",
+ seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
ioc->facts.CurrentHostMfaHighAddr);
- len += sprintf(buf+len, " CurrentSenseBufferHighAddr = 0x%08x\n",
+ seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
ioc->facts.CurrentSenseBufferHighAddr);
- len += sprintf(buf+len, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
- len += sprintf(buf+len, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
+ seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
+ seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
- len += sprintf(buf+len, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
+ seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
(void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
/*
* Rounding UP to nearest 4-kB boundary here...
*/
sz = (ioc->req_sz * ioc->req_depth) + 128;
sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
- len += sprintf(buf+len, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
+ seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
- len += sprintf(buf+len, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
+ seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
4*ioc->facts.RequestFrameSize,
ioc->facts.GlobalCredits);
- len += sprintf(buf+len, " Frames @ 0x%p (Dma @ 0x%p)\n",
+ seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
(void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
sz = (ioc->reply_sz * ioc->reply_depth) + 128;
- len += sprintf(buf+len, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
+ seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
- len += sprintf(buf+len, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
+ seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
ioc->facts.CurReplyFrameSize,
ioc->facts.ReplyQueueDepth);
- len += sprintf(buf+len, " MaxDevices = %d\n",
+ seq_printf(m, " MaxDevices = %d\n",
(ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
- len += sprintf(buf+len, " MaxBuses = %d\n", ioc->facts.MaxBuses);
+ seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
/* per-port info */
for (p=0; p < ioc->facts.NumberOfPorts; p++) {
- len += sprintf(buf+len, " PortNumber = %d (of %d)\n",
+ seq_printf(m, " PortNumber = %d (of %d)\n",
p+1,
ioc->facts.NumberOfPorts);
if (ioc->bus_type == FC) {
if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
- len += sprintf(buf+len, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
+ seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
a[5], a[4], a[3], a[2], a[1], a[0]);
}
- len += sprintf(buf+len, " WWN = %08X%08X:%08X%08X\n",
+ seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
ioc->fc_port_page0[p].WWNN.High,
ioc->fc_port_page0[p].WWNN.Low,
ioc->fc_port_page0[p].WWPN.High,
@@ -6751,9 +6708,21 @@ procmpt_iocinfo_read(char *buf, char **s
}
}
- MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len);
+ return 0;
+}
+
+static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mpt_iocinfo_proc_show, PDE(inode)->data);
}
+static const struct file_operations mpt_iocinfo_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mpt_iocinfo_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif /* CONFIG_PROC_FS } */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -6819,6 +6788,39 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc,
*size = y;
}
+
+static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
+{
+ char expVer[32];
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ /*
+ * Shorter summary of attached ioc's...
+ */
+ seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
+ ioc->name,
+ ioc->prod_name,
+ MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
+ ioc->facts.FWVersion.Word,
+ expVer,
+ ioc->facts.NumberOfPorts,
+ ioc->req_depth);
+
+ if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
+ u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
+ seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+
+ seq_printf(m, ", IRQ=%d", ioc->pci_irq);
+
+ if (!ioc->active)
+ seq_printf(m, " (disabled)");
+
+ seq_putc(m, '\n');
+}
+
/**
* mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
* @ioc: Pointer to MPT_ADAPTER structure
diff -puN drivers/message/fusion/mptbase.h~mpt-fusion-convert-to-seq_file drivers/message/fusion/mptbase.h
--- a/drivers/message/fusion/mptbase.h~mpt-fusion-convert-to-seq_file
+++ a/drivers/message/fusion/mptbase.h
@@ -418,31 +418,6 @@ typedef struct _VirtDevice {
#define MPT_TARGET_FLAGS_LED_ON 0x80
/*
- * /proc/mpt interface
- */
-typedef struct {
- const char *name;
- mode_t mode;
- int pad;
- read_proc_t *read_proc;
- write_proc_t *write_proc;
-} mpt_proc_entry_t;
-
-#define MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len) \
-do { \
- len -= offset; \
- if (len < request) { \
- *eof = 1; \
- if (len <= 0) \
- return 0; \
- } else \
- len = request; \
- *start = buf + offset; \
- return len; \
-} while (0)
-
-
-/*
* IOCTL structure and associated defines
*/
_
Patches currently in -mm which might be from adobriyan@gmail.com are
linux-next.patch
proc_fops-convert-av7110.patch
proc_fops-convert-cpia.patch
genirq-switch-proc-irq-spurious-to-seq_file.patch
proc_fops-convert-drivers-isdn-to-seq_file.patch
proc_fops-convert-drivers-isdn-to-seq_file-fix.patch
const-constify-remaining-dev_pm_ops.patch
uml-irq-register-race-condition.patch
make-debug_bugverbose-default-to-y.patch
proc-rename-de_get-to-pde_get-and-inline-it.patch
const-constify-remaining-pipe_buf_operations.patch
ufs-pass-qstr-instead-of-dentry-where-necessary-for-nfs.patch
ufs-nfs-support.patch
reiserfs-remove-proc-fs-reiserfs-version.patch
reiserfs-dont-compile-procfso-at-all-if-no-support.patch
mpt-fusion-convert-to-seq_file.patch
ray_cs-convert-to-proc_fops.patch
ipw2x00-convert-to-seq_file.patch
thinkpad_acpi-convert-to-seq_file.patch
asus_acpi-convert-to-seq_file.patch
toshiba_acpi-convert-to-seq_file.patch
pnpbios-convert-to-seq_file.patch
reply other threads:[~2009-11-25 21:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200911252111.nAPLBiVf017604@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=Eric.Moore@lsi.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=adobriyan@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.