From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] NAND: Updating the NAND README
Date: Tue, 1 Dec 2009 17:28:02 -0600 [thread overview]
Message-ID: <20091201232802.GA19487@loki.buserror.net> (raw)
In-Reply-To: <1259690767-28035-1-git-send-email-s-paulraj@ti.com>
On Tue, Dec 01, 2009 at 01:06:07PM -0500, s-paulraj at ti.com wrote:
> +MTD NAND 64 bit support:
> +========================
> +
> +The MTD NAND infrastructure in U-Boot(until release 2009.11) used only
> +32 bit values to represent device size. As a result of which if we use
> +a NAND device of size 4 GB and above, the MTD NAND driver will not detect
> +such a NAND device due to overflow.
> +NANDs comes in various flavours. There are some NANDs which are
> +internally 2 devices and have 2 chipselects. If the SOC specific
> +NAND driver is designed to treat each NAND device as a separate device
> +then we will still be able to detect the entire 4GB of a NAND device.
> +Each chipselect being responsible for 2 GB address space.
> +But if at the U-Boot level we want to have access to the entire 4GB address
> +space then the only way to achieve this is to update the MTD and NAND drivers
> +with 64 bit values.
> +The Linux kernel was updated with 64 bit values sometime in December '08.
> +The core NAND driver is now similar to the core NAND driver in the kernel.
> +We appropriately update the MTD layer in U-Boot.
> +In the process of syncing up with the kernel we have also updated the
> +NAND driver with other enhancements that made its way to the NAND driver.
> +
> +After these features were added, testing was performed on a wide
> +range of NAND devices with page size of 64 KiB, 128KiB, 256KiB and 512
> +KiB. Also 2 separate 4GB NAND devices(one from SAMSUNG and one from MICRON)
> +were successfully tested. U-Boot was able to correctly detect the device
> +and read bad blocks.
Hmm, not sure we need to describe here what was, rather than what is.
> +What is lacking?
> +================
> +
> +We need to add 64 bit support in cmd_nand.c and env_nand.c as well.
> +Without this certain diagnostcis
typo
> will fail. For example,
> +issuing a "nand bad" command results in the same bad blocks being
> +found infinite times. This happens if we use a 4 GB NAND device.
> +This will not occur if NANDs of smalles than 4 GB are used.
s/of smalles than/smaller than/
> +At this point of time it appears as if the entire common folder
> +needs to be updated with 64 bit values.
Yeah... If you want to put a concise note about this here, I'll add it,
though an actual bug tracking system would be nice. :-)
-Scott
next prev parent reply other threads:[~2009-12-01 23:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-01 18:06 [U-Boot] [PATCH] NAND: Updating the NAND README s-paulraj at ti.com
2009-12-01 23:28 ` Scott Wood [this message]
2009-12-01 23:33 ` Paulraj, Sandeep
2009-12-01 23:38 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091201232802.GA19487@loki.buserror.net \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.