From: Ed Tomlinson <edt@aei.ca>
To: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Subject: [BUG] 2.6.32 - Sddr-09 SM reader resets endlessly
Date: Thu, 3 Dec 2009 18:00:11 -0500 [thread overview]
Message-ID: <200912031800.11780.edt@aei.ca> (raw)
Hi,
Just booted in 2.6.32 and shortly after the boot finished my console was spammed with:
[ 72.221620] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.375589] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.529568] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.683603] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.837601] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.991700] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.145679] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.309620] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.463603] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.617604] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.704218] usb 7-4.1: device descriptor read/all, error -32
[ 73.773612] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.927569] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 74.081627] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 74.244640] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
I noticed the leds on the devince blinking and unplugged it. The messages stopped.
Plugging it in to another port gave:
[ 120.096590] usb 7-4.2: new full speed USB device using ehci_hcd and address 7
[ 120.188421] usb 7-4.2: New USB device found, idVendor=0781, idProduct=0200
[ 120.196857] usb 7-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 120.205801] usb 7-4.2: Product: USB SSFDC
[ 120.205803] usb 7-4.2: Manufacturer: SanDisk
[ 120.206023] usb 7-4.2: configuration #1 chosen from 1 choice
[ 120.210375] scsi10 : SCSI emulation for USB Mass Storage devices
[ 120.210625] usb-storage: device found at 7
[ 120.210627] usb-storage: waiting for device to settle before scanning
[ 125.210356] scsi 10:0:0:0: Direct-Access Sandisk0 ImageMate SDDR-0 0208 PQ: 0 ANSI: 0
[ 125.221014] sd 10:0:0:0: Attached scsi generic sg8 type 0
[ 125.538583] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 125.693592] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 125.846595] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 125.999570] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.152625] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.306641] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.400839] sddr09: could not read card info
[ 126.412283] sddr09: could not read card info
[ 126.418737] sd 10:0:0:0: [sdh] Test WP failed, assume Write Enabled
[ 126.418760] usb-storage: device scan complete
[ 126.433764] sd 10:0:0:0: [sdh] Assuming drive cache: write through
[ 126.497612] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.654080] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.810051] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.965658] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 127.121623] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 127.276631] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 127.366116] sd 10:0:0:0: [sdh] Attached SCSI removable disk
[ 140.543572] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 140.699676] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 140.855450] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 141.010675] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 141.166668] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 141.322616] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
just in case it happened to be an interaction with the hub used I tried another:
[ 1294.563062] usb 3-1: new full speed USB device using ohci_hcd and address 3
[ 1294.718252] usb 3-1: New USB device found, idVendor=0781, idProduct=0200
[ 1294.725162] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1294.732507] usb 3-1: Product: USB SSFDC
[ 1294.732508] usb 3-1: Manufacturer: SanDisk
[ 1294.733099] usb 3-1: configuration #1 chosen from 1 choice
[ 1294.745034] scsi11 : SCSI emulation for USB Mass Storage devices
[ 1294.747443] usb-storage: device found at 3
[ 1294.747446] usb-storage: waiting for device to settle before scanning
[ 1299.747426] scsi 11:0:0:0: Direct-Access Sandisk ImageMate SDDR-0 0208 PQ: 0 ANSI: 0
[ 1299.756510] sd 11:0:0:0: Attached scsi generic sg8 type 0
[ 1300.134401] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1300.412298] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1300.688049] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1300.963179] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1301.244400] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1301.524066] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1301.687139] sddr09: could not read card info
[ 1301.703118] sddr09: could not read card info
[ 1301.707764] usb-storage: device scan complete
[ 1301.708402] sd 11:0:0:0: [sdh] Test WP failed, assume Write Enabled
[ 1301.708404] sd 11:0:0:0: [sdh] Assuming drive cache: write through
[ 1301.848059] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.124049] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.400044] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.677051] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.952305] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1303.229063] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1303.378075] sd 11:0:0:0: [sdh] Attached SCSI removable disk
[ 1314.966421] usb 3-1: reset full speed USB device using ohci_hcd and address 3
with the same results.
Ideas?
Ed
next reply other threads:[~2009-12-03 23:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-03 23:00 Ed Tomlinson [this message]
2009-12-04 15:21 ` [BUG] 2.6.32 - Sddr-09 SM reader resets endlessly Alan Stern
2009-12-05 4:44 ` Ed Tomlinson
2009-12-05 17:55 ` Alan Stern
2009-12-05 20:06 ` Andries E. Brouwer
2009-12-05 21:34 ` Alan Stern
2009-12-06 0:00 ` Ed Tomlinson
2009-12-06 4:51 ` Alan Stern
2009-12-06 17:07 ` Ed Tomlinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200912031800.11780.edt@aei.ca \
--to=edt@aei.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.