From: Volker Lanz <vl@fidra.de>
To: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org, mingo@elte.hu
Subject: Re: [BISECTED, REGRESSION] Successful resume from suspend but freezes after I/O
Date: Mon, 7 Dec 2009 21:36:40 +0100 [thread overview]
Message-ID: <200912072136.40202.vl@fidra.de> (raw)
In-Reply-To: <4B1D561C.9030802@kernel.org>
On Monday 07 December 2009 20:23:08 Yinghai Lu wrote:
> Volker Lanz wrote:
> > On Monday 07 December 2009 19:24:02 Yinghai Lu wrote:
> >> Volker Lanz wrote:
> >>> Hi,
> >>>
> >>> updating to my distro's new 2.6.31 kernel on an x86_64 quad core
> >>> machine with 6 GB of RAM I noticed resuming from suspend still worked
> >>> as before, but the machine will now reproducably freeze (have to hard
> >>> reset) afterwards as soon as I do something disk I/O heavy, though the
> >>> problem is probably not related to disk activity at all.
> >>>
> >>> A current mainline 2.6.32 checkout shows the same behaviour.
> >>>
> >>> I git-bisected the problem to this commit:
> >>>
> >>>
> >>> -----------------------------------------------------------------------
> >>>-- ---- commit 78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
> >>> Author: Yinghai Lu <yinghai@kernel.org>
> >>> Date: Thu Mar 12 22:36:01 2009 -0700
> >>>
> >>> x86: make e820_update_range() handle small range update
> >>>
> >>> Impact: enhance e820 code to handle more cases
> >>>
> >>> Try to handle new range which could be covered by one entry.
> >>>
> >>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>> Cc: jbeulich@novell.com
> >>> LKML-Reference: <49B9F0C1.10402@kernel.org>
> >>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>> -----------------------------------------------------------------------
> >>>-- ----
> >>>
> >>>
> >>> A kernel built from this revision does not boot, so the first booting
> >>> kernel to show the problem actually seems to be:
> >>>
> >>>
> >>> -----------------------------------------------------------------------
> >>>-- ---- commit 6d7942dc2a70a7e74c352107b150265602671588
> >>> Author: Yinghai Lu <yinghai@kernel.org>
> >>> Date: Sat Mar 14 14:32:41 2009 -0700
> >>>
> >>> x86: fix 64k corruption-check
> >>>
> >>> Impact: fix boot crash
> >>>
> >>> Need to exit early if the addr is far above 64k.
> >>>
> >>> The crash got exposed by:
> >>>
> >>> 78a8b35: x86: make e820_update_range() handle small range update
> >>>
> >>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>> Cc: <stable@kernel.org>
> >>> LKML-Reference: <49BC2279.2030101@kernel.org>
> >>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>> -----------------------------------------------------------------------
> >>>-- ----
> >>>
> >>>
> >>> The last kernel to work without problems thus seems to be this one:
> >>>
> >>>
> >>> -----------------------------------------------------------------------
> >>>-- ---- commit 773e673de27297d07d852e7e9bfd1a695cae1da2
> >>> Author: Yinghai Lu <yinghai@kernel.org>
> >>> Date: Thu Mar 12 21:35:18 2009 -0700
> >>>
> >>> x86: fix e820_update_range()
> >>>
> >>> Impact: fix left range size on head
> >>>
> >>> | commit 5c0e6f035df983210e4d22213aed624ced502d3d
> >>> | x86: fix code paths used by update_mptable
> >>> | Impact: fix crashes under Xen due to unrobust e820 code
> >>>
> >>> fixes one e820 bug, but introduces another bug.
> >>>
> >>> Need to update size for left range at first in case it is header.
> >>>
> >>> also add __e820_add_region take more parameter.
> >>>
> >>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >>> Cc: jbeulich@novell.com
> >>> LKML-Reference: <49B9E286.502@kernel.org>
> >>> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> >>> -----------------------------------------------------------------------
> >>>-- ----
> >>>
> >>>
> >>> The problem is 100% reproducable on this machine: Resuming and then
> >>> copying /usr/ to $HOME will freeze after a few hundred MB have been
> >>> copied. Earlier kernels worked fine for the last couple of months.
> >>>
> >>> What additional information is required to help diagnose and hopefully
> >>> fix the problem?
> >>
> >> whole boot log with CONFIG_PCI_DEBUG and debug on command line.
> >
> > Here it is. It's huge, I hope you were expecting that...
>
> and the one with current tip?
>
> http://people.redhat.com/mingo/tip.git/readme.txt
With this kernel, the problem persists. Here's the log:
-----------------------------------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-tip-02731-gd17424f (vl@trevor) (gcc
version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #22 SMP Mon Dec 7 21:09:21 CET 2009
[ 0.000000] Command line: root=UUID=160351ee-c9b0-4a72-9fd5-9962c8137a7e ro
nosplash debug
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 1B0000000 mask FF0000000 uncachable
[ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable)
==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee2000 - 00000000cfef0000 (ACPI data)
[ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001b0000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ c000-12000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
[ 0.000000] 0100000000 - 01b0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1b0000000 @ 10000-18000
[ 0.000000] RAMDISK: 34054000 - 37fef801
[ 0.000000] ACPI: RSDP 00000000000f7280 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee2040 0004C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee20c0 00074 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee2180 04CD9 (v01 GBT GBTUACPI 00001000
MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: EUDS 00000000cfee7580 00500 (v01 GBT 00000000
00000000)
[ 0.000000] ACPI: HPET 00000000cfee74c0 00038 (v01 GBT GBTUACPI 42302E31
GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7540 0003C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee6ec0 00084 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfee83b0 0018A (v01 PmRef Cpu0Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee8540 0018A (v01 PmRef Cpu1Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee86d0 0018A (v01 PmRef Cpu2Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee8860 0018A (v01 PmRef Cpu3Cst 00003001
INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cfee89f0 003AB (v01 PmRef CpuPm 00003000
INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] found SMP MP-table at [ffff8800000f5890] f5890
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001b0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000
[ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000004dfff] pages 36
[ 0.000000] (13 early reservations) ==> bootmem [0000000000 - 01b0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 0001c89284] TEXT DATA BSS ==> [0001000000
- 0001c89284]
[ 0.000000] #3 [0034054000 - 0037fef801] RAMDISK ==> [0034054000
- 0037fef801]
[ 0.000000] #4 [0001c8a000 - 0001c8a0f6] BRK ==> [0001c8a000
- 0001c8a0f6]
[ 0.000000] #5 [0000008000 - 000000c000] ACPI WAKEUP ==> [0000008000
- 000000c000]
[ 0.000000] #6 [000000c000 - 0000010000] PGTABLE ==> [000000c000
- 0000010000]
[ 0.000000] #7 [0000010000 - 0000013000] PGTABLE ==> [0000010000
- 0000013000]
[ 0.000000] #8 [00000f58a0 - 0000100000] BIOS reserved ==> [00000f58a0
- 0000100000]
[ 0.000000] #9 [00000f5890 - 00000f58a0] MP-table mpf ==> [00000f5890
- 00000f58a0]
[ 0.000000] #10 [000009f800 - 00000f0d00] BIOS reserved ==>
[000009f800 - 00000f0d00]
[ 0.000000] #11 [00000f0ebc - 00000f5890] BIOS reserved ==>
[00000f0ebc - 00000f5890]
[ 0.000000] #12 [00000f0d00 - 00000f0ebc] MP-table mpc ==>
[00000f0d00 - 00000f0ebc]
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880028600000-
ffff88002dbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x001b0000
[ 0.000000] On node 0 totalpages: 1572474
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 109 pages reserved
[ 0.000000] DMA zone: 3829 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 -
00000000cfee2000
[ 0.000000] PM: Registered nosave memory: 00000000cfee2000 -
00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 -
00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap:
e4000000:1ac00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91416 r8192
d23272 u524288
[ 0.000000] pcpu-alloc: s91416 r8192 d23272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1548173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=160351ee-
c9b0-4a72-9fd5-9962c8137a7e ro nosplash debug
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6057076k/7077888k available (5318k kernel code, 787992k
absent, 232820k reserved, 5695k data, 652k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2833.355 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5666.71 BogoMIPS (lpj=28333550)
[ 0.010102] Security Framework initialized
[ 0.010145] SELinux: Disabled at boot.
[ 0.010690] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.015409] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.017728] Mount-cache hash table entries: 256
[ 0.017893] Initializing cgroup subsys ns
[ 0.017935] Initializing cgroup subsys cpuacct
[ 0.017975] Initializing cgroup subsys memory
[ 0.018017] Initializing cgroup subsys freezer
[ 0.018056] Initializing cgroup subsys net_cls
[ 0.018112] CPU 0/0x0 -> Node 0
[ 0.018149] CPU: Physical Processor ID: 0
[ 0.018187] CPU: Processor Core ID: 0
[ 0.018226] mce: CPU supports 6 MCE banks
[ 0.018269] CPU0: Thermal monitoring enabled (TM2)
[ 0.018309] using mwait in idle threads.
[ 0.018347] Performance Events: Core2 events, Intel PMU driver.
[ 0.018442] ... version: 2
[ 0.018479] ... bit width: 40
[ 0.018517] ... generic registers: 2
[ 0.018555] ... value mask: 000000ffffffffff
[ 0.018594] ... max period: 000000007fffffff
[ 0.018632] ... fixed-purpose events: 3
[ 0.018670] ... event mask: 0000000700000003
[ 0.019692] ACPI: Core revision 20090903
[ 0.027900] Setting APIC routing to flat
[ 0.028240] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.127856] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.130000] Booting processor 1 APIC 0x3 ip 0x6000
[ 0.130000] Initializing CPU#1
[ 0.130000] CPU 1/0x3 -> Node 0
[ 0.130000] CPU: Physical Processor ID: 0
[ 0.130000] CPU: Processor Core ID: 3
[ 0.130000] CPU1: Thermal monitoring enabled (TM2)
[ 0.280090] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.290059] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.290050] Initializing CPU#2
[ 0.290050] CPU 2/0x2 -> Node 0
[ 0.290050] CPU: Physical Processor ID: 0
[ 0.290050] CPU: Processor Core ID: 2
[ 0.290050] CPU2: Thermal monitoring enabled (TM2)
[ 0.450090] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.460059] Booting processor 3 APIC 0x1 ip 0x6000
[ 0.460049] Initializing CPU#3
[ 0.460049] CPU 3/0x1 -> Node 0
[ 0.460049] CPU: Physical Processor ID: 0
[ 0.460049] CPU: Processor Core ID: 1
[ 0.460049] CPU3: Thermal monitoring enabled (TM2)
[ 0.620088] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping
0a
[ 0.630013] Brought up 4 CPUs
[ 0.630052] Total of 4 processors activated (22664.82 BogoMIPS).
[ 0.632719] regulator: core version 0.5
[ 0.632778] Time: 21:22:24 Date: 12/07/09
[ 0.632844] NET: Registered protocol family 16
[ 0.632966] ACPI: bus type pci registered
[ 0.633053] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.633094] PCI: MCFG area at e0000000 reserved in E820
[ 0.634412] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.634451] PCI: Using configuration type 1 for base access
[ 0.635112] bio: create slab <bio-0> at 0
[ 0.635613] ACPI: EC: Look up EC in DSDT
[ 0.640352] ACPI: Interpreter enabled
[ 0.640395] ACPI: (supports S0 S3 S4 S5)
[ 0.640553] ACPI: Using IOAPIC for interrupt routing
[ 0.644231] ACPI: No dock devices found.
[ 0.644344] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.644402] PCI: Scanning bus 0000:00
[ 0.644445] pci 0000:00:00.0: found [8086:2e20] class 000600 header type 00
[ 0.644503] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.644544] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.644597] pci 0000:00:01.0: found [8086:2e21] class 000604 header type 01
[ 0.644651] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.644692] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.644741] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.644782] pci 0000:00:01.0: PME# disabled
[ 0.644848] pci 0000:00:1a.0: found [8086:3a37] class 000c03 header type 00
[ 0.644913] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f]
[ 0.644962] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.645003] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645064] pci 0000:00:1a.1: found [8086:3a38] class 000c03 header type 00
[ 0.645128] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f]
[ 0.645177] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x19f
[ 0.645218] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645278] pci 0000:00:1a.2: found [8086:3a39] class 000c03 header type 00
[ 0.645343] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f]
[ 0.645391] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x19f
[ 0.645432] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645498] pci 0000:00:1a.7: found [8086:3a3c] class 000c03 header type 00
[ 0.645552] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe9305000-0xe93053ff]
[ 0.645617] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x19f
[ 0.645658] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645723] pci 0000:00:1b.0: found [8086:3a3e] class 000403 header type 00
[ 0.645777] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe9300000-0xe9303fff]
[ 0.645835] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.645876] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.645930] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.645972] pci 0000:00:1b.0: PME# disabled
[ 0.646022] pci 0000:00:1c.0: found [8086:3a40] class 000604 header type 01
[ 0.646080] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.646121] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646178] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.646219] pci 0000:00:1c.0: PME# disabled
[ 0.646272] pci 0000:00:1c.3: found [8086:3a46] class 000604 header type 01
[ 0.646330] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x19f
[ 0.646370] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646428] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.646469] pci 0000:00:1c.3: PME# disabled
[ 0.646520] pci 0000:00:1c.4: found [8086:3a48] class 000604 header type 01
[ 0.646578] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x19f
[ 0.646619] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646676] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.646717] pci 0000:00:1c.4: PME# disabled
[ 0.646771] pci 0000:00:1d.0: found [8086:3a34] class 000c03 header type 00
[ 0.646836] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[ 0.646885] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.646926] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.646986] pci 0000:00:1d.1: found [8086:3a35] class 000c03 header type 00
[ 0.647051] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[ 0.647099] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x19f
[ 0.647140] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647201] pci 0000:00:1d.2: found [8086:3a36] class 000c03 header type 00
[ 0.647266] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f]
[ 0.647314] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x19f
[ 0.647355] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647420] pci 0000:00:1d.7: found [8086:3a3a] class 000c03 header type 00
[ 0.647473] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe9304000-0xe93043ff]
[ 0.647538] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x19f
[ 0.647579] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647641] pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01
[ 0.647700] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.647740] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647802] pci 0000:00:1f.0: found [8086:3a18] class 000601 header type 00
[ 0.647885] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.647926] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.647993] pci 0000:00:1f.2: found [8086:3a20] class 000101 header type 00
[ 0.648046] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.648088] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.648130] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.648172] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.648214] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.648256] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f]
[ 0.648302] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x19f
[ 0.648343] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.648403] pci 0000:00:1f.3: found [8086:3a30] class 000c05 header type 00
[ 0.648452] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe9306000-0xe93060ff]
[ 0.648502] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.648549] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x19f
[ 0.648590] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.648642] pci 0000:00:1f.5: found [8086:3a26] class 000101 header type 00
[ 0.648695] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707]
[ 0.648738] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803]
[ 0.648780] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907]
[ 0.648822] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03]
[ 0.648865] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f]
[ 0.648907] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[ 0.648952] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x19f
[ 0.648993] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a
[ 0.649050] PCI: Fixups for bus 0000:00
[ 0.649089] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0
[ 0.649131] PCI: Scanning bus 0000:01
[ 0.649177] pci 0000:01:00.0: found [10de:0402] class 000300 header type 00
[ 0.649227] pci 0000:01:00.0: reg 10 32bit mmio: [0xe6000000-0xe6ffffff]
[ 0.649273] pci 0000:01:00.0: reg 14 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.649319] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe4000000-0xe5ffffff]
[ 0.649362] pci 0000:01:00.0: reg 24 io port: [0xb000-0xb07f]
[ 0.649404] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.649447] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.649529] PCI: Fixups for bus 0000:01
[ 0.649568] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.650002] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe7ffffff]
[ 0.650650] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.650691] PCI: Bus scan for 0000:01 returning with max=01
[ 0.650732] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0
[ 0.650779] PCI: Scanning bus 0000:02
[ 0.650841] PCI: Fixups for bus 0000:02
[ 0.650884] PCI: Bus scan for 0000:02 returning with max=02
[ 0.650925] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 0
[ 0.650968] PCI: Scanning bus 0000:03
[ 0.651020] pci 0000:03:00.0: found [197b:2363] class 000101 header type 00
[ 0.651072] pci 0000:03:00.0: calling quirk_jmicron_ata+0x0/0x140
[ 0.651160] pci 0000:03:00.0: reg 24 32bit mmio: [0xe9000000-0xe9001fff]
[ 0.651210] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.651274] pci 0000:03:00.0: PME# supported from D3hot
[ 0.651316] pci 0000:03:00.0: PME# disabled
[ 0.651378] pci 0000:03:00.1: found [197b:2363] class 000101 header type 00
[ 0.651431] pci 0000:03:00.1: calling quirk_jmicron_ata+0x0/0x140
[ 0.651480] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
[ 0.651525] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103]
[ 0.651571] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
[ 0.651617] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303]
[ 0.651662] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.651719] pci 0000:03:00.1: calling quirk_resource_alignment+0x0/0x19f
[ 0.651816] PCI: Fixups for bus 0000:03
[ 0.651855] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.651896] pci 0000:00:1c.3: bridge 32bit mmio: [0xe9000000-0xe90fffff]
[ 0.651940] PCI: Bus scan for 0000:03 returning with max=03
[ 0.651981] pci 0000:00:1c.4: scanning behind bridge, config 040400, pass 0
[ 0.652024] PCI: Scanning bus 0000:04
[ 0.652076] pci 0000:04:00.0: found [10ec:8168] class 000200 header type 00
[ 0.652135] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.652190] pci 0000:04:00.0: reg 18 64bit mmio pref:
[0xe9110000-0xe9110fff]
[ 0.652241] pci 0000:04:00.0: reg 20 64bit mmio pref:
[0xe9100000-0xe910ffff]
[ 0.652287] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.652331] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.652400] pci 0000:04:00.0: supports D1 D2
[ 0.652438] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.652481] pci 0000:04:00.0: PME# disabled
[ 0.652559] PCI: Fixups for bus 0000:04
[ 0.652599] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.652640] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe8ffffff]
[ 0.652683] pci 0000:00:1c.4: bridge 64bit mmio pref:
[0xe9100000-0xe91fffff]
[ 0.652724] PCI: Bus scan for 0000:04 returning with max=04
[ 0.652765] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 0
[ 0.652807] PCI: Scanning bus 0000:05
[ 0.652863] pci 0000:05:07.0: found [104c:8024] class 000c00 header type 00
[ 0.652918] pci 0000:05:07.0: reg 10 32bit mmio: [0xe9204000-0xe92047ff]
[ 0.652963] pci 0000:05:07.0: reg 14 32bit mmio: [0xe9200000-0xe9203fff]
[ 0.653026] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x19f
[ 0.653078] pci 0000:05:07.0: supports D1 D2
[ 0.653117] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.653158] pci 0000:05:07.0: PME# disabled
[ 0.653225] PCI: Fixups for bus 0000:05
[ 0.653263] pci 0000:00:1e.0: transparent bridge
[ 0.653304] pci 0000:00:1e.0: bridge 32bit mmio: [0xe9200000-0xe92fffff]
[ 0.653348] PCI: Bus scan for 0000:05 returning with max=05
[ 0.653388] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1
[ 0.653431] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1
[ 0.653474] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 1
[ 0.653517] pci 0000:00:1c.4: scanning behind bridge, config 040400, pass 1
[ 0.653561] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 1
[ 0.653604] PCI: Bus scan for 0000:00 returning with max=05
[ 0.653645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.653784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.653865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.653949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.654028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.666430] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 0.666890] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.667404] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14
15)
[ 0.667863] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 0.668322] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.668835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14
15)
[ 0.669294] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 0.669753] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14
15)
[ 0.670217] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.670277] vgaarb: loaded
[ 0.670386] SCSI subsystem initialized
[ 0.670512] libata version 3.00 loaded.
[ 0.670596] usbcore: registered new interface driver usbfs
[ 0.670647] usbcore: registered new interface driver hub
[ 0.670701] usbcore: registered new device driver usb
[ 0.670822] ACPI: WMI: Mapper loaded
[ 0.670860] PCI: Using ACPI for IRQ routing
[ 0.671016] Bluetooth: Core ver 2.15
[ 0.671072] NET: Registered protocol family 31
[ 0.671110] Bluetooth: HCI device and connection manager initialized
[ 0.671151] Bluetooth: HCI socket layer initialized
[ 0.671190] NetLabel: Initializing
[ 0.671227] NetLabel: domain hash size = 128
[ 0.671265] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.671311] NetLabel: unlabeled traffic allowed by default
[ 0.671364] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.671409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.671582] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.690004] Switching to clocksource tsc
[ 0.691273] pnp: PnP ACPI init
[ 0.691317] ACPI: bus type pnp registered
[ 0.693002] pnp: PnP ACPI: found 12 devices
[ 0.693041] ACPI: ACPI bus type pnp unregistered
[ 0.693084] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.693125] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.693165] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.693206] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.693246] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.693287] system 00:01: ioport range 0x4c0-0x4ff could not be reserved
[ 0.693330] system 00:08: ioport range 0x400-0x4bf has been reserved
[ 0.693373] system 00:09: iomem range 0xe0000000-0xe3ffffff has been
reserved
[ 0.693416] system 00:0a: iomem range 0xccc00-0xcffff has been reserved
[ 0.693457] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.693498] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.693539] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.693580] system 00:0a: iomem range 0xcfee0000-0xcfefffff could not be
reserved
[ 0.693629] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.693669] system 00:0a: iomem range 0x100000-0xcfedffff could not be
reserved
[ 0.693718] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.693767] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been
reserved
[ 0.693808] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.693849] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.693890] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been
reserved
[ 0.693932] system 00:0a: iomem range 0xfff00000-0xffffffff has been
reserved
[ 0.693973] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 0.698648] pci 0000:01:00.0: BAR 6: got res [0xe7000000-0xe701ffff] bus
[0xe7000000-0xe701ffff] flags 0x27200
[ 0.698699] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.698740] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.698780] pci 0000:00:01.0: MEM window: 0xe4000000-0xe7ffffff
[ 0.698821] pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.698870] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.698911] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.698952] pci 0000:00:1c.0: MEM window: 0xe9400000-0xe95fffff
[ 0.698993] pci 0000:00:1c.0: PREFETCH window:
0x000000e9600000-0x000000e97fffff
[ 0.699045] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.699085] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.699126] pci 0000:00:1c.3: MEM window: 0xe9000000-0xe90fffff
[ 0.699168] pci 0000:00:1c.3: PREFETCH window:
0x000000e9800000-0x000000e99fffff
[ 0.699220] pci 0000:04:00.0: BAR 6: got res [0xe9120000-0xe912ffff] bus
[0xe9120000-0xe912ffff] flags 0x27200
[ 0.699270] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 0.699311] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.699352] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe8ffffff
[ 0.699393] pci 0000:00:1c.4: PREFETCH window:
0x000000e9100000-0x000000e91fffff
[ 0.699444] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.699498] pci 0000:00:1e.0: IO window: disabled
[ 0.699539] pci 0000:00:1e.0: MEM window: 0xe9200000-0xe92fffff
[ 0.699581] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.699625] alloc irq_desc for 16 on node -1
[ 0.699663] alloc kstat_irqs on node -1
[ 0.699703] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.699751] pci 0000:00:01.0: setting latency timer to 64
[ 0.699795] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.699836] pci 0000:00:1c.0: setting latency timer to 64
[ 0.699879] alloc irq_desc for 19 on node -1
[ 0.699918] alloc kstat_irqs on node -1
[ 0.699956] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.699998] pci 0000:00:1c.3: setting latency timer to 64
[ 0.700041] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.700083] pci 0000:00:1c.4: setting latency timer to 64
[ 0.700125] pci 0000:00:1e.0: setting latency timer to 64
[ 0.700166] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.700205] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.700246] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.700285] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.700326] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.700366] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.701002] pci_bus 0000:02: resource 1 mem: [0xe9400000-0xe95fffff]
[ 0.701042] pci_bus 0000:02: resource 2 pref mem [0xe9600000-0xe97fffff]
[ 0.701083] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.701122] pci_bus 0000:03: resource 1 mem: [0xe9000000-0xe90fffff]
[ 0.701163] pci_bus 0000:03: resource 2 pref mem [0xe9800000-0xe99fffff]
[ 0.701203] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.701243] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe8ffffff]
[ 0.701283] pci_bus 0000:04: resource 2 pref mem [0xe9100000-0xe91fffff]
[ 0.701324] pci_bus 0000:05: resource 1 mem: [0xe9200000-0xe92fffff]
[ 0.701364] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.701403] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.701462] NET: Registered protocol family 2
[ 0.701670] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.702574] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.705993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.706603] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.706644] TCP reno registered
[ 0.706775] NET: Registered protocol family 1
[ 0.706834] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.706876] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.706917] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.706959] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.707000] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.707041] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707081] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707122] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xbd
[ 0.707163] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.707204] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707244] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707297] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xbd
[ 0.707338] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x192
[ 0.707378] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707419] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707470] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xbd
[ 0.707511] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x192
[ 0.707552] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707592] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707644] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xbd
[ 0.707685] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x192
[ 0.707725] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707766] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707826] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xbd
[ 0.707867] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.707908] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.707948] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.707989] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xbd
[ 0.708030] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.708070] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708111] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708151] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xbd
[ 0.708192] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x192
[ 0.708232] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708273] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708314] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xbd
[ 0.708354] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x192
[ 0.708395] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708435] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708476] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xbd
[ 0.708517] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.708558] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708598] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708649] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xbd
[ 0.708690] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x192
[ 0.708731] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708771] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708822] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xbd
[ 0.708864] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x192
[ 0.708904] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30
[ 0.708944] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x580
[ 0.708996] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xbd
[ 0.709037] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x192
[ 0.709077] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709118] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709183] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xbd
[ 0.709224] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.709265] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709306] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709346] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xbd
[ 0.709387] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x192
[ 0.709428] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709468] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709536] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xbd
[ 0.709577] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x192
[ 0.709618] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709658] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709699] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xbd
[ 0.709750] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x192
[ 0.709791] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709831] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x580
[ 0.709872] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xbd
[ 0.709913] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x192
[ 0.709954] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x30
[ 0.709994] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710035] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xbd
[ 0.710075] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 0.710122] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710163] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710203] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.710244] pci 0000:01:00.0: Boot video device
[ 0.710284] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710324] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710365] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.710405] pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710446] pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710486] pci 0000:03:00.1: calling pci_fixup_video+0x0/0xbd
[ 0.710527] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710567] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710608] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xbd
[ 0.710649] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.710689] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x580
[ 0.710730] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xbd
[ 0.710809] Trying to unpack rootfs image as initramfs...
[ 1.812734] Freeing initrd memory: 65134k freed
[ 1.843111] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.843156] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 1.843205] software IO TLB at phys 0x20000000 - 0x24000000
[ 1.843519] Scanning for low memory corruption every 60 seconds
[ 1.843700] audit: initializing netlink socket (disabled)
[ 1.843753] type=2000 audit(1260220944.840:1): initialized
[ 1.854067] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.855065] VFS: Disk quotas dquot_6.5.2
[ 1.855139] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.855555] fuse init (API version 7.13)
[ 1.855645] msgmni has been set to 11957
[ 1.855869] alg: No test for stdrng (krng)
[ 1.855914] io scheduler noop registered
[ 1.855952] io scheduler anticipatory registered
[ 1.855990] io scheduler deadline registered
[ 1.856051] io scheduler cfq registered (default)
[ 1.856173] alloc irq_desc for 24 on node -1
[ 1.856212] alloc kstat_irqs on node -1
[ 1.856256] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.856298] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.856405] alloc irq_desc for 25 on node -1
[ 1.856443] alloc kstat_irqs on node -1
[ 1.856485] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.856528] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.856649] alloc irq_desc for 26 on node -1
[ 1.856687] alloc kstat_irqs on node -1
[ 1.856729] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 1.856772] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.856893] alloc irq_desc for 27 on node -1
[ 1.856931] alloc kstat_irqs on node -1
[ 1.856973] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 1.857016] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.857114] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.857219] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.857366] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.857417] ACPI: Power Button [PWRB]
[ 1.857496] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.857544] ACPI: Power Button [PWRF]
[ 1.857951] ACPI: SSDT 00000000cfee7ad0 0022A (v01 PmRef Cpu0Ist 00003000
INTL 20040311)
[ 1.858207] Marking TSC unstable due to TSC halts in idle
[ 1.858274] processor LNXCPU:00: registered as cooling_device0
[ 1.858490] ACPI: SSDT 00000000cfee7f90 00152 (v01 PmRef Cpu1Ist 00003000
INTL 20040311)
[ 1.858812] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU1._PDC] (Node ffff8801a9048f40), AE_ALREADY_EXISTS
[ 1.858946] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.859099] Switching to clocksource hpet
[ 1.859287] processor LNXCPU:01: registered as cooling_device1
[ 1.859530] ACPI: SSDT 00000000cfee80f0 00152 (v01 PmRef Cpu2Ist 00003000
INTL 20040311)
[ 1.859851] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU2._PDC] (Node ffff8801a9048fc0), AE_ALREADY_EXISTS
[ 1.859991] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.860227] processor LNXCPU:02: registered as cooling_device2
[ 1.860434] ACPI: SSDT 00000000cfee8250 00152 (v01 PmRef Cpu3Ist 00003000
INTL 20040311)
[ 1.860756] ACPI Error (psparse-0537): Method parse/execution failed
[\_PR_.CPU3._PDC] (Node ffff8801a904f040), AE_ALREADY_EXISTS
[ 1.860890] ACPI: Marking method _PDC as Serialized because of
AE_ALREADY_EXISTS error
[ 1.861733] processor LNXCPU:03: registered as cooling_device3
[ 1.864013] Linux agpgart interface v0.103
[ 1.864057] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.864930] brd: module loaded
[ 1.865271] loop: module loaded
[ 1.865349] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.865455] ahci 0000:03:00.0: version 3.0
[ 1.865504] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.883786] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 1.883838] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum
part
[ 1.883888] ahci 0000:03:00.0: setting latency timer to 64
[ 1.884054] scsi0 : ahci
[ 1.884139] scsi1 : ahci
[ 1.884229] ata1: SATA max UDMA/133 abar m8192@0xe9000000 port 0xe9000100
irq 19
[ 1.884279] ata2: SATA max UDMA/133 abar m8192@0xe9000000 port 0xe9000180
irq 19
[ 2.230026] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.600025] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.620049] ata_piix 0000:00:1f.2: version 2.13
[ 2.620096] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 2.620145] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.620342] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.620427] scsi2 : ata_piix
[ 2.620500] scsi3 : ata_piix
[ 2.621072] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 2.621115] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.480056] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.480113] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.546220] ata3.00: HPA detected: current 1953523055, native 1953525168
[ 3.546266] ata3.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 3.546312] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.546507] ata3.01: ATA-7: ST3300831AS, 3.02, max UDMA/133
[ 3.546549] ata3.01: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.606228] ata3.00: configured for UDMA/133
[ 3.620303] ata3.01: configured for UDMA/133
[ 3.620432] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC34
PQ: 0 ANSI: 5
[ 3.620540] sd 2:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.620617] sd 2:0:0:0: [sda] Write Protect is off
[ 3.620656] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.620710] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.620842] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 3.709735] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.709803] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.709883] scsi 2:0:1:0: Direct-Access ATA ST3300831AS 3.02
PQ: 0 ANSI: 5
[ 3.709983] sd 2:0:1:0: [sdb] 586072368 512-byte logical blocks: (300
GB/279 GiB)
[ 3.710062] sd 2:0:1:0: [sdb] Write Protect is off
[ 3.710101] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.710154] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.710276] sdb: sdb1
[ 3.733490] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 3.733553] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 4.590055] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.590112] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.630289] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 4.630332] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.630394] ata4.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 4.650303] ata4.00: configured for UDMA/133
[ 4.690193] ata4.01: configured for UDMA/100
[ 4.690568] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 4.690686] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 4.690761] sd 3:0:0:0: [sdc] Write Protect is off
[ 4.690801] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.690853] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.690972] sdc: sdc2 < sdc5 sdc6 sdc7 > sdc3
[ 4.771287] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 4.771349] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4.772662] scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01
PQ: 0 ANSI: 5
[ 4.776309] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
cdda tray
[ 4.776361] Uniform CD-ROM driver Revision: 3.20
[ 4.776469] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 4.776532] sr 3:0:1:0: Attached scsi generic sg3 type 5
[ 4.776585] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 4.776628] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.776823] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.776889] scsi4 : ata_piix
[ 4.776959] scsi5 : ata_piix
[ 4.777364] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq
19
[ 4.777407] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq
19
[ 5.130659] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.490657] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.490918] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 5.490961] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) ->
IRQ 16
[ 5.491026] pata_jmicron 0000:03:00.1: enabling bus mastering
[ 5.491069] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 5.491147] scsi6 : pata_jmicron
[ 5.491217] scsi7 : pata_jmicron
[ 5.491729] ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq
16
[ 5.491771] ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq
16
[ 5.821774] Fixed MDIO Bus: probed
[ 5.821834] PPP generic driver version 2.4.2
[ 5.821914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.821965] alloc irq_desc for 18 on node -1
[ 5.822004] alloc kstat_irqs on node -1
[ 5.822044] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 5.822090] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.822131] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.822198] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 5.826136] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 5.826183] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9305000
[ 5.850012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.850124] usb usb1: configuration #1 chosen from 1 choice
[ 5.850186] hub 1-0:1.0: USB hub found
[ 5.850227] hub 1-0:1.0: 6 ports detected
[ 5.850306] alloc irq_desc for 23 on node -1
[ 5.850344] alloc kstat_irqs on node -1
[ 5.850384] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 5.850430] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.850470] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.850533] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 5.854488] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.854536] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9304000
[ 5.870012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.870103] usb usb2: configuration #1 chosen from 1 choice
[ 5.870173] hub 2-0:1.0: USB hub found
[ 5.870214] hub 2-0:1.0: 6 ports detected
[ 5.870290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.870339] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.870410] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.870453] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.870493] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.870554] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 5.870620] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 5.870708] usb usb3: configuration #1 chosen from 1 choice
[ 5.870765] hub 3-0:1.0: USB hub found
[ 5.870806] hub 3-0:1.0: 2 ports detected
[ 5.870871] alloc irq_desc for 21 on node -1
[ 5.870910] alloc kstat_irqs on node -1
[ 5.870949] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 5.870992] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.871033] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.871092] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 5.871163] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 5.871249] usb usb4: configuration #1 chosen from 1 choice
[ 5.871306] hub 4-0:1.0: USB hub found
[ 5.871347] hub 4-0:1.0: 2 ports detected
[ 5.871413] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 5.871456] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5.871496] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.871552] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 5.871617] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 5.871706] usb usb5: configuration #1 chosen from 1 choice
[ 5.871760] hub 5-0:1.0: USB hub found
[ 5.871800] hub 5-0:1.0: 2 ports detected
[ 5.871867] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 5.871911] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.871951] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.872007] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 5.872072] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 5.872159] usb usb6: configuration #1 chosen from 1 choice
[ 5.872214] hub 6-0:1.0: USB hub found
[ 5.872256] hub 6-0:1.0: 2 ports detected
[ 5.872323] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 5.872367] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.872407] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.872470] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 5.872535] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 5.872623] usb usb7: configuration #1 chosen from 1 choice
[ 5.873275] hub 7-0:1.0: USB hub found
[ 5.873317] hub 7-0:1.0: 2 ports detected
[ 5.873385] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 5.873428] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.873468] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.873524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 5.873590] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 5.873678] usb usb8: configuration #1 chosen from 1 choice
[ 5.873732] hub 8-0:1.0: USB hub found
[ 5.873772] hub 8-0:1.0: 2 ports detected
[ 5.873869] PNP: No PS/2 controller found. Probing ports directly.
[ 5.874253] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.874297] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.874418] mice: PS/2 mouse device common for all mice
[ 5.874499] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 5.874565] rtc_cmos 00:04: RTC can wake from S4
[ 5.874623] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.874681] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.874797] device-mapper: uevent: version 1.0.3
[ 5.874884] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 5.875013] device-mapper: multipath: version 1.1.0 loaded
[ 5.875053] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.875353] cpuidle: using governor ladder
[ 5.875544] cpuidle: using governor menu
[ 5.875821] TCP cubic registered
[ 5.875954] NET: Registered protocol family 10
[ 5.876293] lo: Disabled Privacy Extensions
[ 5.876518] NET: Registered protocol family 17
[ 5.876567] Bluetooth: L2CAP ver 2.14
[ 5.876605] Bluetooth: L2CAP socket layer initialized
[ 5.876644] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.876682] Bluetooth: SCO socket layer initialized
[ 5.876736] Bluetooth: RFCOMM TTY layer initialized
[ 5.876775] Bluetooth: RFCOMM socket layer initialized
[ 5.876814] Bluetooth: RFCOMM ver 1.11
[ 5.882144] PM: Resume from disk failed.
[ 5.882194] registered taskstats version 1
[ 5.882564] Magic number: 5:613:398
[ 5.882699] rtc_cmos 00:04: setting system clock to 2009-12-07 21:22:29 UTC
(1260220949)
[ 5.882755] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.882794] EDD information not available.
[ 5.882873] Freeing unused kernel memory: 652k freed
[ 5.883017] Write protecting the kernel read-only data: 10240k
[ 5.883246] Freeing unused kernel memory: 808k freed
[ 5.883550] Freeing unused kernel memory: 1764k freed
[ 5.976979] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.977040] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.977087] r8169 0000:04:00.0: enabling Mem-Wr-Inval
[ 5.977167] r8169 0000:04:00.0: setting latency timer to 64
[ 5.977247] alloc irq_desc for 28 on node -1
[ 5.977291] alloc kstat_irqs on node -1
[ 5.977341] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
[ 5.977778] eth0: RTL8168c/8111c at 0xffffc90000c5c000, 00:1f:d0:9d:27:af,
XID 1c4000c0 IRQ 28
[ 5.980983] Floppy drive(s): fd0 is 1.44M
[ 6.005636] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 6.006235] FDC 0 is a post-1991 82077
[ 6.063833] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]
MMIO=[e9204000-e92047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.458065] kjournald starting. Commit interval 5 seconds
[ 6.458075] EXT3-fs: mounted filesystem with writeback data mode.
[ 6.810046] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 7.106807] usb 3-1: configuration #1 chosen from 1 choice
[ 7.390029] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 7.390128] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007c2d6400001fd0]
[ 7.562823] usb 5-1: configuration #1 chosen from 1 choice
[ 7.840038] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 8.019777] usb 5-2: configuration #1 chosen from 1 choice
[ 8.300039] usb 8-1: new full speed USB device using uhci_hcd and address 2
[ 8.476735] usb 8-1: configuration #1 chosen from 1 choice
[ 8.478696] hub 8-1:1.0: USB hub found
[ 8.480677] hub 8-1:1.0: 4 ports detected
[ 8.760029] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 8.938728] usb 8-2: configuration #1 chosen from 1 choice
[ 9.021674] usb 8-1.4: new low speed USB device using uhci_hcd and address
4
[ 9.163725] usb 8-1.4: configuration #1 chosen from 1 choice
[ 11.782064] udev: starting version 147
[ 12.299406] usbcore: registered new interface driver hiddev
[ 12.316947] input: Logitech USB RECEIVER as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 12.317025] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-2/input0
[ 12.330897] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.0/input/input4
[ 12.330934] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10
Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input0
[ 12.361985] input: CHESEN PS2 to USB Converter as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.1/input/input5
[ 12.362100] generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10
Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input1
[ 12.362124] usbcore: registered new interface driver usbhid
[ 12.362148] usbhid: v2.6:USB HID core driver
[ 12.529906] lp: driver loaded but no devices found
[ 12.602382] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.283068] nvidia: module license 'NVIDIA' taints kernel.
[ 13.283071] Disabling lock debugging due to kernel taint
[ 13.644907] alloc irq_desc for 22 on node -1
[ 13.644910] alloc kstat_irqs on node -1
[ 13.644918] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 13.645025] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.740059] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.740065] nvidia 0000:01:00.0: setting latency timer to 64
[ 13.740190] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri
Aug 14 17:35:21 PDT 2009
[ 13.798095] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 13.879985] usbcore: registered new interface driver snd-usb-audio
[ 14.126815] Adding 6562544k swap on /dev/mapper/cryptoswap. Priority:-1
extents:1 across:6562544k
[ 15.530195] EXT3 FS on sda8, internal journal
[ 15.906396] r8169: eth0: link up
[ 15.906398] r8169: eth0: link up
[ 16.308462] kjournald starting. Commit interval 5 seconds
[ 16.308468] EXT3-fs: mounted filesystem with writeback data mode.
[ 16.347904] kjournald starting. Commit interval 5 seconds
[ 16.348154] EXT3 FS on sda6, internal journal
[ 16.348156] EXT3-fs: mounted filesystem with writeback data mode.
[ 16.522213] kjournald starting. Commit interval 5 seconds
[ 16.522219] EXT3-fs: mounted filesystem with writeback data mode.
[ 16.542184] kjournald starting. Commit interval 5 seconds
[ 16.542520] EXT3 FS on sdc6, internal journal
[ 16.542522] EXT3-fs: mounted filesystem with writeback data mode.
[ 17.720700] RPC: Registered udp transport module.
[ 17.720703] RPC: Registered tcp transport module.
[ 17.720704] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.891520] ppdev: user-space parallel port driver
[ 18.340322] svc: failed to register lockdv1 RPC service (errno 97).
[ 25.734557] kjournald starting. Commit interval 5 seconds
[ 25.734568] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 25.750204] EXT3 FS on dm-1, internal journal
[ 25.750209] EXT3-fs: mounted filesystem with writeback data mode.
[ 26.792535] eth0: no IPv6 routers present
[ 28.008085] CPUFREQ: Per core ondemand sysfs interface is deprecated -
up_threshold
-----------------------------------------------------------------------------
Volker
next prev parent reply other threads:[~2009-12-07 20:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-07 17:56 [BISECTED, REGRESSION] Successful resume from suspend but freezes after I/O Volker Lanz
2009-12-07 18:24 ` Yinghai Lu
2009-12-07 19:13 ` Volker Lanz
2009-12-07 19:23 ` Yinghai Lu
2009-12-07 20:36 ` Volker Lanz [this message]
2009-12-07 22:01 ` Yinghai Lu
2009-12-08 0:07 ` Volker Lanz
2009-12-07 23:05 ` Yinghai Lu
2009-12-08 1:13 ` Volker Lanz
2009-12-21 8:54 ` Volker Lanz
2009-12-28 23:40 ` Rafael J. Wysocki
2010-01-13 7:35 ` Yinghai Lu
2010-01-13 18:04 ` Volker Lanz
2010-01-13 19:57 ` Yinghai Lu
2010-01-14 13:05 ` Volker Lanz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200912072136.40202.vl@fidra.de \
--to=vl@fidra.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.