All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ladislav Michl <Ladislav.Michl@seznam.cz>
To: linux-omap@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Subject: [PATCH 2/2] MTD: remove no longer used OMAP flash map
Date: Tue, 8 Dec 2009 20:28:06 +0100	[thread overview]
Message-ID: <20091208192806.GC32268@localhost.localdomain> (raw)
In-Reply-To: <20091208192111.GA32268@localhost.localdomain>

All OMAP boards are now using physmap-flash.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 14be075..c165a27 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -436,15 +436,6 @@ config MTD_H720X
 	  This enables access to the flash chips on the Hynix evaluation boards.
 	  If you have such a board, say 'Y'.
 
-config MTD_OMAP_NOR
-	tristate "TI OMAP board mappings"
-	depends on MTD_CFI && ARCH_OMAP
-	help
-	  This enables access to the NOR flash chips on TI OMAP-based
-	  boards defining flash platform devices and flash platform data.
-	  These boards include the Innovator, H2, H3, OSK, Perseus2, and
-	  more.  If you have such a board, say 'Y'.
-
 # This needs CFI or JEDEC, depending on the cards found.
 config MTD_PCI
 	tristate "PCI MTD driver"
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index ae2f6db..ef11888 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o
 obj-$(CONFIG_MTD_DMV182)	+= dmv182.o
 obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
-obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
 obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
 obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
--- a/drivers/mtd/maps/omap_nor.c	2009-10-20 13:04:52.000000000 +0200
+++ b/drivers/mtd/maps/omap_nor.c	2009-12-08 14:04:43.543715066 +0100
@@ -1,188 +0,0 @@
-/*
- * Flash memory support for various TI OMAP boards
- *
- * Copyright (C) 2001-2002 MontaVista Software Inc.
- * Copyright (C) 2003-2004 Texas Instruments
- * Copyright (C) 2004 Nokia Corporation
- *
- *	Assembled using driver code copyright the companies above
- *	and written by David Brownell, Jian Zhang <jzhang@ti.com>,
- * 	Tony Lindgren <tony@atomide.com> and others.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/mach/flash.h>
-#include <plat/tc.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
-#endif
-
-struct omapflash_info {
-	struct mtd_partition	*parts;
-	struct mtd_info		*mtd;
-	struct map_info		map;
-};
-
-static void omap_set_vpp(struct map_info *map, int enable)
-{
-	static int	count;
-	u32 l;
-
-	if (cpu_class_is_omap1()) {
-		if (enable) {
-			if (count++ == 0) {
-				l = omap_readl(EMIFS_CONFIG);
-				l |= OMAP_EMIFS_CONFIG_WP;
-				omap_writel(l, EMIFS_CONFIG);
-			}
-		} else {
-			if (count && (--count == 0)) {
-				l = omap_readl(EMIFS_CONFIG);
-				l &= ~OMAP_EMIFS_CONFIG_WP;
-				omap_writel(l, EMIFS_CONFIG);
-			}
-		}
-	}
-}
-
-static int __init omapflash_probe(struct platform_device *pdev)
-{
-	int err;
-	struct omapflash_info *info;
-	struct flash_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *res = pdev->resource;
-	unsigned long size = res->end - res->start + 1;
-
-	info = kzalloc(sizeof(struct omapflash_info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	if (!request_mem_region(res->start, size, "flash")) {
-		err = -EBUSY;
-		goto out_free_info;
-	}
-
-	info->map.virt		= ioremap(res->start, size);
-	if (!info->map.virt) {
-		err = -ENOMEM;
-		goto out_release_mem_region;
-	}
-	info->map.name		= dev_name(&pdev->dev);
-	info->map.phys		= res->start;
-	info->map.size		= size;
-	info->map.bankwidth	= pdata->width;
-	info->map.set_vpp	= omap_set_vpp;
-
-	simple_map_init(&info->map);
-	info->mtd = do_map_probe(pdata->map_name, &info->map);
-	if (!info->mtd) {
-		err = -EIO;
-		goto out_iounmap;
-	}
-	info->mtd->owner = THIS_MODULE;
-
-	info->mtd->dev.parent = &pdev->dev;
-
-#ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
-	if (err > 0)
-		add_mtd_partitions(info->mtd, info->parts, err);
-	else if (err <= 0 && pdata->parts)
-		add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
-	else
-#endif
-		add_mtd_device(info->mtd);
-
-	platform_set_drvdata(pdev, info);
-
-	return 0;
-
-out_iounmap:
-	iounmap(info->map.virt);
-out_release_mem_region:
-	release_mem_region(res->start, size);
-out_free_info:
-	kfree(info);
-
-	return err;
-}
-
-static int __exit omapflash_remove(struct platform_device *pdev)
-{
-	struct omapflash_info *info = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	if (info) {
-		if (info->parts) {
-			del_mtd_partitions(info->mtd);
-			kfree(info->parts);
-		} else
-			del_mtd_device(info->mtd);
-		map_destroy(info->mtd);
-		release_mem_region(info->map.phys, info->map.size);
-		iounmap((void __iomem *) info->map.virt);
-		kfree(info);
-	}
-
-	return 0;
-}
-
-static struct platform_driver omapflash_driver = {
-	.remove	= __exit_p(omapflash_remove),
-	.driver = {
-		.name	= "omapflash",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init omapflash_init(void)
-{
-	return platform_driver_probe(&omapflash_driver, omapflash_probe);
-}
-
-static void __exit omapflash_exit(void)
-{
-	platform_driver_unregister(&omapflash_driver);
-}
-
-module_init(omapflash_init);
-module_exit(omapflash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MTD NOR map driver for TI OMAP boards");
-MODULE_ALIAS("platform:omapflash");

  parent reply	other threads:[~2009-12-08 18:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-08 19:21 [PATCH 0/2] OMAP: use physmap-flash Ladislav Michl
2009-12-08 18:33 ` Tony Lindgren
2009-12-09 10:07   ` Artem Bityutskiy
2009-12-09 10:07     ` Artem Bityutskiy
2009-12-09 16:26     ` Tony Lindgren
2009-12-09 16:26       ` Tony Lindgren
2009-12-08 19:24 ` [PATCH 1/2] OMAP: convert boards to " Ladislav Michl
2009-12-11 22:12   ` Tony Lindgren
2009-12-13 23:55     ` [PATCH v2 " Ladislav Michl
2010-01-07  0:57       ` Tony Lindgren
2010-01-07  2:01         ` Tony Lindgren
2009-12-08 19:28 ` Ladislav Michl [this message]
2010-01-07  0:51   ` [APPLIED] [PATCH 2/2] MTD: remove no longer used OMAP flash map Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091208192806.GC32268@localhost.localdomain \
    --to=ladislav.michl@seznam.cz \
    --cc=ladis@linux-mips.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.