From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Sat, 12 Dec 2009 13:57:12 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core Message-Id: <20091212145712.4faea09f@hyperion.delvare> List-Id: References: <20090609083406.GE25316@prithivi.gnumonks.org> In-Reply-To: <20090609083406.GE25316@prithivi.gnumonks.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Sat, 12 Dec 2009 20:48:17 +1000, Adam Nielsen wrote: > > I would > > appreciate if someone could test it and report, just to make sure I > > didn't accidentally break the driver with my clean-ups. Thanks. > > I've been using it for the last few hours on an EPIA M700 (1GHz C7) and it > seems to work fine. > > I still don't get any output through "sensors" though: > > $ sensors > via-cputemp-isa-0000 > Adapter: ISA adapter > > I'm guessing because on line 118 the name is set to "via-cputemp" with a dash, > instead of DRVNAME. Oops, thanks for reporting. I thought I had fixed it, but obviously not. This is done now. But that wouldn't be the reason for your problem. More likely, you're running an old version of lm-sensors (2.x). You need 3.x. > sysfs and GKrellM seem to report accurate temperatures though. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors