Re: evdev and Trust TB-5300 tablet: wrong axis labels

From: "Daniil V. Kolpakov" <dan@riga.lv>
To: Matthew Helsley <matt.helsley@gmail.com>, xorg@lists.freedesktop.org
Cc: linux-usb@vger.kernel.org, linux-input@vger.kernel.org
Subject: Re: evdev and Trust TB-5300 tablet: wrong axis labels
Date: Sun, 13 Dec 2009 18:25:03 +0200	[thread overview]
Message-ID: <200912131825.03872.dan@riga.lv> (raw)
In-Reply-To: <6a12d2f30912121727w2fbc8d19k35b55da8fcb9ffe1@mail.gmail.com>

Matthew, thanks for the info!

В сообщении от 13 декабря 2009 Matthew Helsley написал(a):
> What does /proc/bus/input/devices say about your tablet? I've got a
> UC-LOGIC "Genius Pensketch 12x9" which had (and still has) some USB
> quirks. The worst was it reported the X axis as the Z axis. It turned
> out that the hid descriptor was bad and thus the kernel hid parser got
> confused. Specifying the "MULTI" quirk seemed to fix the axis
> labelling problem. You can test it and other quirks out by writing to
> a sysfs file -- though I'm looking and can't seem to find it on my
> 2.6.31 distro kernel :(.

/proc/bus/input/devices says pretty much the same as it does in your case:

I: Bus=0003 Vendor=5543 Product=0004 Version=0100
N: Name="UC-LOGIC Tablet WP5540U"
P: Phys=usb-0000:03:00.0-2/input0
S: 
Sysfs=/devices/pci0000:00/0000:00:06.0/0000:03:00.0/usb1/1-2/1-2:1.0/input/input6
U: Uniq=
H: Handlers=mouse2 event6
B: EV=1f
B: KEY=c01 3f0001 0 0 0 0
B: REL=303
B: ABS=100000f
B: MSC=10

I can't find any information on how to enable quirks through sysfs (and where 
to get list of available quirks, too). Can you point me to some documentation 
on this subject?

-- 
Please avoid sending me Word or PowerPoint attachments.
See http://www.gnu.org/philosophy/no-word-attachments.html

Support open standards! Take a look at this nice presentation:
http://www.dwheeler.com/essays/open-standards-security.pdf
_______________________________________________
xorg mailing list
xorg@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/xorg