[Bug 14831] mptsas - Use of ATA command pass-through results in unreliable operation - drive / controller resets

[bugzilla-daemon@bugzilla.kernel.org]

http://bugzilla.kernel.org/show_bug.cgi?id=14831





--- Comment #2 from Tim Small <tim@seoss.co.uk>  2009-12-18 15:18:37 ---
For the 1068 (Dell PE860):

     Port Name         Chip Vendor/Type/Rev    MPT Rev  Firmware Rev
 1.  /proc/mpt/ioc0    LSI Logic SAS1068 B0      105      000a3300

Current active firmware version is 0.10.51
Firmware image's version is MPTFW-00.10.51.00-IE
  LSI Logic
x86 BIOS image's version is MPTBIOS-6.12.05.00 (2007.09.29)


For the 1068E: (Dell PE1950):
     Port Name         Chip Vendor/Type/Rev    MPT Rev  Firmware Rev
 1.  /proc/mpt/ioc0    LSI Logic SAS1068E 08     105      00192f00

Current active firmware version is 0.25.47
Firmware image's version is MPTFW-00.25.47.00-IE
  LSI Logic
x86 BIOS image's version is MPTBIOS-6.22.03.00 (2008.08.06)


I've just started a test on a SAS1064 (Intel S5000PSL).  Will leave it on test
and report back here...

Thanks,

Tim.

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.