From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Board is not booting after flashing U-boot and hard reset
Date: Wed, 30 Dec 2009 06:21:39 +0100 [thread overview]
Message-ID: <200912300621.39211.sr@denx.de> (raw)
In-Reply-To: <c3293e780912290704s6ddf6eefr804398d6cc489a22@mail.gmail.com>
On Tuesday 29 December 2009 16:04:28 prakash bedge wrote:
> I am facing an error while flashing u-boot on my PPC4xx based board.
What kind of PPC4xx are you using (405EX, 440SP, 440EPx, 460EX...)?
> When I flash the u-boot on the PCI board I am developing, and hard reset
> the board, then the board is not able to boot up.
> Also I am not able to debug the code as probe connection fails.
>
> Whar are the reason that I should check to see why the board is not booting
> up after hard reset.
> Is it fault in start.S or somewhere else in code I need to see?
>
> It would be great if someone who already have a solution on this
> porblem, share his experience.
I suspect some problems with the bootstrap configuration. Are you using a
fixed bootstrap option? Or are you using the bootstrap I2C EEPROM? If yes, is
this EEPROM configured correctly?
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
next prev parent reply other threads:[~2009-12-30 5:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-29 15:04 [U-Boot] Board is not booting after flashing U-boot and hard reset prakash bedge
2009-12-30 5:21 ` Stefan Roese [this message]
2009-12-30 11:31 ` prakash bedge
2009-12-30 11:51 ` Stefan Roese
2009-12-31 4:39 ` prakash bedge
2010-01-04 9:36 ` Stefan Roese
2009-12-30 12:27 ` Vivek
2009-12-31 10:04 ` prakash bedge
2010-01-04 10:07 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200912300621.39211.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.