From: Armando Baia <armbaia@gmail.com>
To: linux-media@vger.kernel.org
Subject: [248.815294] DVB: adapter 0 frontend 0 symbol rate 4800000 out of range (5000000..45000000)
Date: Sat, 2 Jan 2010 11:21:02 +0000 [thread overview]
Message-ID: <201001021121.03197.armbaia@gmail.com> (raw)
Sorry if some phrases in the text does not make sense, I Portuguese do not
speak English, this text is translated by google.
I am not a expert with computers, so it is natural that does not do things
well, but this is my problem!
Using openSUSE 11.2 with kernel 2.6.31.5-0.1-desktop. I have installed a card
Technotrend budget dvb-s 3200, which in windows is to scan all frequencies,
but Linux does not scan the frequencies SymbolRate less than 5000! I leave you
with the information that within my limited knowledge of the system,may lead
to solving the problem.
linux-o2b8:~ # dmesg
[ 0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc
version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT
2009-10-26 15:49:03 +0100
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7e0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] modified: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] modified: 000000003f7ae000 - 000000003f7e0000 (ACPI NVS)
[ 0.000000] modified: 000000003f7e0000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0036e00000 page 2M
[ 0.000000] 0036e00000 - 0036ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 10000-1b000
[ 0.000000] RAMDISK: 379aa000 - 37feff0f
[ 0.000000] Allocated new RAMDISK: 00af7000 - 0113cf0f
[ 0.000000] Move RAMDISK from 00000000379aa000 - 0000000037feff0e to
00af7000 - 0113cf0e
[ 0.000000] ACPI: RSDP 000fb030 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 ?????? ???????? 08000701 MSFT
00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 08000701 MSFT
00000097)
[ 0.000000] ACPI: DSDT 3f7a05c0 0682B (v01 A0798 A0798000 00000000 INTL
20051117)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0006C (v01 A_M_I_ OEMAPIC 08000701 MSFT
00000097)
[ 0.000000] ACPI: MCFG 3f7a0400 0003C (v01 A_M_I_ OEMMCFG 08000701 MSFT
00000097)
[ 0.000000] ACPI: SLIC 3f7a0440 00176 (v01 ?????? ???????? 08000701 MSFT
00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00080 (v01 A_M_I_ AMI_OEM 08000701 MSFT
00000097)
[ 0.000000] ACPI: HPET 3f7a6df0 00038 (v01 A_M_I_ OEMHPET 08000701 MSFT
00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3f7a0
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000
2c000 30000 34000 38000 3c000
[ 0.000000] node 0 pfn: [0 - 3f7a0]
[ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3ee00
[ 0.000000] remove_active_range (0, 257536, 259584)
[ 0.000000] Reserving total of 800 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe
[ 0.000000] max_pfn = 3f7a0
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 879MB LOWMEM available.
[ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe
[ 0.000000] Low memory ends at vaddr f6ffe000
[ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f6600000 to pfn 0003ee00
[ 0.000000] remap_numa_kva: f6800000 to pfn 0003f000
[ 0.000000] remap_numa_kva: f6a00000 to pfn 0003f200
[ 0.000000] remap_numa_kva: f6c00000 to pfn 0003f400
[ 0.000000] High memory starts at vaddr f6ffe000
[ 0.000000] mapped low ram: 0 - 36ffe000
[ 0.000000] low ram: 0 - 36ffe000
[ 0.000000] node 0 low ram: 00000000 - 36ffe000
[ 0.000000] node 0 bootmap 00018000 - 0001ee00
[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==> [0000200000
- 0000aeda90]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #5 [0000aee000 - 0000af6210] BRK ==> [0000aee000
- 0000af6210]
[ 0.000000] #6 [0000010000 - 0000018000] PGTABLE ==> [0000010000
- 0000018000]
[ 0.000000] #7 [0000af7000 - 000113cf0f] NEW RAMDISK ==> [0000af7000
- 000113cf0f]
[ 0.000000] #8 [003ee00000 - 003f600000] KVA RAM
[ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000
- 0036e00000]
[ 0.000000] #10 [0000018000 - 000001f000] BOOTMAP ==>
[0000018000 - 000001f000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00036ffe
[ 0.000000] HighMem 0x00036ffe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ee00
[ 0.000000] 0: 0x0003f600 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 257839
[ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map
f6602200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 32402 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap:
3f800000:bf600000)
[ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 14 pages at c1142000, static data 34204 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 255807
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-
Hitachi_HDS721680PLAT80_PV6805Z8S9RMEN-part2 resume=/dev/disk/by-id/ata-
Hitachi_HDS721680PLAT80_PV6805Z8S9RMEN-part3 splash=silent quiet vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00036ffe:0003f7a0)
[ 0.000000] Memory: 1006476k/1040000k available (4719k kernel code, 24880k
reserved, 2944k data, 464k init, 130696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB)
[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
[ 0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB)
[ 0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB)
[ 0.000000] .text : 0xc0200000 - 0xc069bd42 (4719 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.042 MHz processor.
[ 0.000117] Console: colour dummy device 80x25
[ 0.000122] console [tty0] enabled
[ 0.000344] hpet clockevent registered
[ 0.000349] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer
[ 0.000356] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3200.08 BogoMIPS (lpj=1600042)
[ 0.021203] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI,
All Rights Reserved
[ 0.021300] Security Framework initialized
[ 0.021325] AppArmor: AppArmor initialized
[ 0.021355] Mount-cache hash table entries: 512
[ 0.021558] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.021563] CPU: L2 cache: 1024K
[ 0.021566] CPU: Physical Processor ID: 0
[ 0.021569] CPU: Processor Core ID: 0
[ 0.021574] mce: CPU supports 6 MCE banks
[ 0.021585] CPU0: Thermal monitoring enabled (TM2)
[ 0.021590] using mwait in idle threads.
[ 0.021598] Performance Counters: Core2 events, Intel PMU driver.
[ 0.021606] ... version: 2
[ 0.021608] ... bit width: 40
[ 0.021610] ... generic counters: 2
[ 0.021613] ... value mask: 000000ffffffffff
[ 0.021616] ... max period: 000000007fffffff
[ 0.021618] ... fixed-purpose counters: 3
[ 0.021621] ... counter mask: 0000000700000003
[ 0.021628] Checking 'hlt' instruction... OK.
[ 0.026536] ACPI: Core revision 20090521
[ 0.039222] Mapping cpu 0 to node 0
[ 0.039401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049737] CPU0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping
0d
[ 0.049992] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Mapping cpu 1 to node 0
[ 0.000999] Calibrating delay using timer specific routine.. 3199.78
BogoMIPS (lpj=1599893)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 1024K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] mce: CPU supports 6 MCE banks
[ 0.000999] CPU1: Thermal monitoring enabled (TM2)
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.121778] CPU1: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping
0d
[ 0.121794] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.122020] Brought up 2 CPUs
[ 0.122020] Total of 2 processors activated (6399.87 BogoMIPS).
[ 0.122092] CPU0 attaching sched-domain:
[ 0.122095] domain 0: span 0-1 level MC
[ 0.122099] groups: 0 1
[ 0.122106] domain 1: span 0-1 level NODE
[ 0.122110] groups: 0-1
[ 0.122117] CPU1 attaching sched-domain:
[ 0.122120] domain 0: span 0-1 level MC
[ 0.122124] groups: 1 0
[ 0.122130] domain 1: span 0-1 level NODE
[ 0.122133] groups: 0-1
[ 0.125059] devtmpfs: initialized
[ 0.126024] Booting paravirtualized kernel on bare hardware
[ 0.126264] regulator: core version 0.5
[ 0.126264] Time: 13:57:42 Date: 12/30/09
[ 0.126264] NET: Registered protocol family 16
[ 0.126324] ACPI: bus type pci registered
[ 0.126414] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.126414] PCI: Not using MMCONFIG.
[ 0.126414] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.126414] PCI: Using configuration type 1 for base access
[ 0.128088] bio: create slab <bio-0> at 0
[ 0.130366] ACPI: EC: Look up EC in DSDT
[ 0.144101] ACPI: Interpreter enabled
[ 0.144112] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.144155] ACPI: Using IOAPIC for interrupt routing
[ 0.144233] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.149739] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.149743] PCI: Using MMCONFIG for extended config space
[ 0.161377] ACPI Warning: Incorrect checksum in table [OEMB] - 99, should
be 8C 20090521 tbutils-246
[ 0.161619] ACPI: No dock devices found.
[ 0.161777] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.161913] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfd00000-0xdfd7ffff]
[ 0.161921] pci 0000:00:02.0: reg 14 io port: [0x8800-0x8807]
[ 0.161928] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
[ 0.161935] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdfd80000-0xdfdbffff]
[ 0.162043] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfdf8000-0xdfdfbfff]
[ 0.162096] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.162102] pci 0000:00:1b.0: PME# disabled
[ 0.162177] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.162183] pci 0000:00:1c.0: PME# disabled
[ 0.162258] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.162264] pci 0000:00:1c.1: PME# disabled
[ 0.162327] pci 0000:00:1d.0: reg 20 io port: [0x9000-0x901f]
[ 0.162386] pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f]
[ 0.162447] pci 0000:00:1d.2: reg 20 io port: [0x9800-0x981f]
[ 0.162509] pci 0000:00:1d.3: reg 20 io port: [0xa000-0xa01f]
[ 0.162575] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdfdffc00-0xdfdfffff]
[ 0.162636] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.162642] pci 0000:00:1d.7: PME# disabled
[ 0.162786] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.162792] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.162799] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290
(mask 0007)
[ 0.162849] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.162858] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.162866] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.162875] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.162884] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.162935] pci 0000:00:1f.2: reg 10 io port: [0xb800-0xb807]
[ 0.162944] pci 0000:00:1f.2: reg 14 io port: [0xb400-0xb403]
[ 0.162952] pci 0000:00:1f.2: reg 18 io port: [0xb000-0xb007]
[ 0.162960] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[ 0.162968] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f]
[ 0.163004] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.163009] pci 0000:00:1f.2: PME# disabled
[ 0.163063] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.163144] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[ 0.163215] pci 0000:02:00.0: reg 10 64bit mmio: [0xdffc0000-0xdfffffff]
[ 0.163253] pci 0000:02:00.0: reg 30 32bit mmio: [0xdffa0000-0xdffbffff]
[ 0.163293] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.163300] pci 0000:02:00.0: PME# disabled
[ 0.163334] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.163416] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.163421] pci 0000:00:1c.1: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.163455] pci 0000:01:00.0: reg 10 32bit mmio: [0xdfeffc00-0xdfeffdff]
[ 0.163549] pci 0000:00:1e.0: transparent bridge
[ 0.163555] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.163560] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.163588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.163816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.163948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.164048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.169401] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[ 0.169579] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 0.169754] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.169929] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.170111] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14
15)
[ 0.170287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.170464] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.170640] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14
15)
[ 0.170942] SCSI subsystem initialized
[ 0.171989] libata version 3.00 loaded.
[ 0.172051] usbcore: registered new interface driver usbfs
[ 0.172051] usbcore: registered new interface driver hub
[ 0.172990] usbcore: registered new device driver usb
[ 0.173042] PCI: Using ACPI for IRQ routing
[ 0.174997] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.175008] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.180535] AppArmor: AppArmor Filesystem Enabled
[ 0.182857] pnp: PnP ACPI init
[ 0.182882] ACPI: bus type pnp registered
[ 0.189782] pnp: PnP ACPI: found 18 devices
[ 0.189785] ACPI: ACPI bus type pnp unregistered
[ 0.189802] system 00:01: iomem range 0xfed13000-0xfed19fff has been
reserved
[ 0.189815] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.189824] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.189829] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.189833] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.189837] system 00:09: ioport range 0x900-0x91f has been reserved
[ 0.189848] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.189853] system 00:09: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.189858] system 00:09: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 0.189863] system 00:09: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 0.189873] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.189878] system 00:0c: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.189888] system 00:0f: iomem range 0xffc00000-0xfff7ffff has been
reserved
[ 0.189896] system 00:10: iomem range 0xf0000000-0xf3ffffff has been
reserved
[ 0.189905] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[ 0.189910] system 00:11: iomem range 0xc0000-0xdffff could not be reserved
[ 0.189914] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[ 0.189919] system 00:11: iomem range 0x100000-0x3f7fffff could not be
reserved
[ 0.224864] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.224870] pci 0000:00:1c.0: IO window: 0xe000-0xefff
[ 0.224876] pci 0000:00:1c.0: MEM window: disabled
[ 0.224881] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.224887] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.224892] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.224899] pci 0000:00:1c.1: MEM window: 0xdff00000-0xdfffffff
[ 0.224904] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.224910] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.224915] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.224922] pci 0000:00:1e.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.224927] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.224944] alloc irq_desc for 16 on node 0
[ 0.224947] alloc kstat_irqs on node 0
[ 0.224955] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.224963] pci 0000:00:1c.0: setting latency timer to 64
[ 0.224972] alloc irq_desc for 17 on node 0
[ 0.224975] alloc kstat_irqs on node 0
[ 0.224980] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.224986] pci 0000:00:1c.1: setting latency timer to 64
[ 0.224995] pci 0000:00:1e.0: setting latency timer to 64
[ 0.225001] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.225006] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.225010] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.225013] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.225017] pci_bus 0000:02: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.225021] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.225025] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.225029] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.225033] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.225135] NET: Registered protocol family 2
[ 0.225295] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.225782] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.226331] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.226679] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.226683] TCP reno registered
[ 0.226947] NET: Registered protocol family 1
[ 0.227043] Unpacking initramfs...
[ 0.418647] Freeing initrd memory: 6423k freed
[ 0.422727] Scanning for low memory corruption every 60 seconds
[ 0.423009] audit: initializing netlink socket (disabled)
[ 0.423032] type=2000 audit(1262181462.422:1): initialized
[ 0.427158] highmem bounce pool size: 64 pages
[ 0.427166] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.427321] VFS: Disk quotas dquot_6.5.2
[ 0.427383] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.427575] msgmni has been set to 430
[ 0.427718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.427723] io scheduler noop registered
[ 0.427726] io scheduler anticipatory registered
[ 0.427729] io scheduler deadline registered
[ 0.427754] io scheduler cfq registered (default)
[ 0.427874] pci 0000:00:02.0: Boot video device
[ 0.428156] alloc irq_desc for 24 on node 0
[ 0.428160] alloc kstat_irqs on node 0
[ 0.428173] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.428184] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.428382] alloc irq_desc for 25 on node 0
[ 0.428386] alloc kstat_irqs on node 0
[ 0.428396] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.428406] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.428533] pci-stub: invalid id string ""
[ 0.428703] vesafb: framebuffer at 0xe0000000, mapped to 0xf7880000, using
5120k, total 7872k
[ 0.428707] vesafb: mode is 1280x1024x16, linelength=2560, pages=2
[ 0.428710] vesafb: scrolling: redraw
[ 0.428714] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.428962] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.450815] bootsplash: silentjpeg size 130564 bytes
[ 0.483105] bootsplash: ...found (1280x1024, 29083 bytes, v3).
[ 0.500834] Switched to high resolution mode on CPU 1
[ 0.500975] Switched to high resolution mode on CPU 0
[ 0.557334] Console: switching to colour frame buffer device 156x60
[ 0.630990] fb0: VESA VGA frame buffer device
[ 0.633266] Non-volatile memory driver v1.3
[ 0.633270] Linux agpgart interface v0.103
[ 0.633311] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.633421] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.634168] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.634490] ata_piix 0000:00:1f.1: version 2.13
[ 0.634510] alloc irq_desc for 22 on node 0
[ 0.634513] alloc kstat_irqs on node 0
[ 0.634523] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 0.634575] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.634654] scsi0 : ata_piix
[ 0.634785] scsi1 : ata_piix
[ 0.637040] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.637045] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.637282] alloc irq_desc for 23 on node 0
[ 0.637285] alloc kstat_irqs on node 0
[ 0.637293] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ
23
[ 0.637300] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.637350] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.637411] scsi2 : ata_piix
[ 0.637489] scsi3 : ata_piix
[ 0.639363] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq
23
[ 0.639367] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq
23
[ 0.639459] Fixed MDIO Bus: probed
[ 0.639468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.639618] alloc irq_desc for 20 on node 0
[ 0.639621] alloc kstat_irqs on node 0
[ 0.639629] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 0.639648] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.639652] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.639691] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 0.643608] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.643616] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.643634] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdfdffc00
[ 0.653023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.653074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.653079] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.653084] usb usb1: Product: EHCI Host Controller
[ 0.653088] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
[ 0.653092] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.653218] usb usb1: configuration #1 chosen from 1 choice
[ 0.653259] hub 1-0:1.0: USB hub found
[ 0.653269] hub 1-0:1.0: 8 ports detected
[ 0.653368] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.653390] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.654167] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 0.654178] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.654184] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.654200] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.654230] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[ 0.654286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.654291] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.654296] usb usb2: Product: UHCI Host Controller
[ 0.654300] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.654305] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.654411] usb usb2: configuration #1 chosen from 1 choice
[ 0.654449] hub 2-0:1.0: USB hub found
[ 0.654461] hub 2-0:1.0: 2 ports detected
[ 0.655159] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 0.655167] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.655172] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.655184] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 0.655220] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[ 0.655261] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.655265] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.655269] usb usb3: Product: UHCI Host Controller
[ 0.655272] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.655275] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.655364] usb usb3: configuration #1 chosen from 1 choice
[ 0.655401] hub 3-0:1.0: USB hub found
[ 0.655410] hub 3-0:1.0: 2 ports detected
[ 0.656163] alloc irq_desc for 18 on node 0
[ 0.656167] alloc kstat_irqs on node 0
[ 0.656177] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 0.656187] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.656193] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.656208] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 0.656250] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[ 0.656305] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.656310] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.656314] usb usb4: Product: UHCI Host Controller
[ 0.656319] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.656323] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.656427] usb usb4: configuration #1 chosen from 1 choice
[ 0.656465] hub 4-0:1.0: USB hub found
[ 0.656474] hub 4-0:1.0: 2 ports detected
[ 0.657158] alloc irq_desc for 19 on node 0
[ 0.657161] alloc kstat_irqs on node 0
[ 0.657168] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 0.657177] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.657181] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.657195] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 0.657231] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[ 0.657272] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.657275] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.657279] usb usb5: Product: UHCI Host Controller
[ 0.657282] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.657285] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.657380] usb usb5: configuration #1 chosen from 1 choice
[ 0.657417] hub 5-0:1.0: USB hub found
[ 0.657426] hub 5-0:1.0: 2 ports detected
[ 0.657511] Initializing USB Mass Storage driver...
[ 0.657555] usbcore: registered new interface driver usb-storage
[ 0.657559] USB Mass Storage support registered.
[ 0.657598] usbcore: registered new interface driver libusual
[ 0.657616] usbcore: registered new interface driver ums-alauda
[ 0.657632] usbcore: registered new interface driver ums-cypress
[ 0.657650] usbcore: registered new interface driver ums-datafab
[ 0.657667] usbcore: registered new interface driver ums-freecom
[ 0.657684] usbcore: registered new interface driver ums-isd200
[ 0.657700] usbcore: registered new interface driver ums-jumpshot
[ 0.657717] usbcore: registered new interface driver ums-karma
[ 0.657736] usbcore: registered new interface driver ums-onetouch
[ 0.657754] usbcore: registered new interface driver ums-sddr09
[ 0.657772] usbcore: registered new interface driver ums-sddr55
[ 0.657789] usbcore: registered new interface driver ums-usbat
[ 0.657867] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.657870] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.658306] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.658393] mice: PS/2 mouse device common for all mice
[ 0.658520] rtc_cmos 00:03: RTC can wake from S4
[ 0.658574] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.658602] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.658624] cpuidle: using governor ladder
[ 0.658627] cpuidle: using governor menu
[ 0.659011] usbcore: registered new interface driver hiddev
[ 0.659032] usbcore: registered new interface driver usbhid
[ 0.659036] usbhid: v2.6:USB HID core driver
[ 0.745414] TCP cubic registered
[ 0.745498] NET: Registered protocol family 10
[ 0.746179] lo: Disabled Privacy Extensions
[ 0.746693] lib80211: common routines for IEEE802.11 drivers
[ 0.746696] lib80211_crypt: registered algorithm 'NULL'
[ 0.746716] Using IPI No-Shortcut mode
[ 0.746832] PM: Checking image partition /dev/disk/by-id/ata-
Hitachi_HDS721680PLAT80_PV6805Z8S9RMEN-part3
[ 0.820784] ata1: clearing spurious IRQ
[ 0.823434] ata1: clearing spurious IRQ
[ 0.826546] ata1.00: ATA-7: Hitachi HDS721680PLAT80, P21OA8BA, max UDMA/133
[ 0.826552] ata1.00: 156301488 sectors, multi 16: LBA48
[ 0.826615] ata1.01: ATAPI: ASUS DRW-1608P3S, 1.06, max UDMA/66
[ 0.826754] ata1: clearing spurious IRQ
[ 0.829130] ata1: clearing spurious IRQ
[ 0.832459] ata1.00: configured for UDMA/100
[ 0.832534] ata1: clearing spurious IRQ
[ 0.835130] ata1: clearing spurious IRQ
[ 0.838289] ata1.01: configured for UDMA/66
[ 0.844861] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O
PQ: 0 ANSI: 5
[ 0.851506] scsi 0:0:1:0: CD-ROM ASUS DRW-1608P3S 1.06
PQ: 0 ANSI: 5
[ 0.851674] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 0.851743] sd 0:0:0:0: [sda] Write Protect is off
[ 0.851747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.851780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.851959] sda: sda1 sda2 sda3
[ 0.886582] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.886593] PM: Resume from disk failed.
[ 0.886613] registered taskstats version 1
[ 0.886773] Magic number: 5:114:990
[ 0.886854] rtc_cmos 00:03: setting system clock to 2009-12-30 13:57:43 UTC
(1262181463)
[ 0.886983] Freeing unused kernel memory: 464k freed
[ 0.887227] Write protecting the kernel text: 4720k
[ 0.887396] Write protecting the kernel read-only data: 2704k
[ 0.961082] Uniform Multi-Platform E-IDE driver
[ 0.972919] ACPI: SSDT 3f7ae0c0 001D2 (v01 AMI CPU1PM 00000001 INTL
20051117)
[ 0.973526] processor LNXCPU:00: registered as cooling_device0
[ 0.973532] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.974021] ACPI: SSDT 3f7ae2a0 00143 (v01 AMI CPU2PM 00000001 INTL
20051117)
[ 0.974571] processor LNXCPU:01: registered as cooling_device1
[ 0.974577] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.984982] udev: starting version 146
[ 1.108097] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 1.484143] usb 1-3: New USB device found, idVendor=058f, idProduct=6387
[ 1.484149] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.484153] usb 1-3: Product: USB2.0
[ 1.484156] usb 1-3: Manufacturer: Generic
[ 1.484159] usb 1-3: SerialNumber: 73BDB33F
[ 1.484312] usb 1-3: configuration #1 chosen from 1 choice
[ 1.486908] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.489421] usb-storage: device found at 4
[ 1.489425] usb-storage: waiting for device to settle before scanning
[ 1.497726] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1.497735] PM: Basic memory bitmaps created
[ 1.509690] PM: Basic memory bitmaps freed
[ 1.520536] PM: Starting manual resume from disk
[ 1.520541] PM: Resume from partition 8:3
[ 1.520544] PM: Checking hibernation image.
[ 1.520748] PM: Resume from disk failed.
[ 1.591028] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 1.620960] EXT4-fs (sda2): barriers enabled
[ 1.644501] kjournald2 starting: pid 236, dev sda2:8, commit interval 5
seconds
[ 1.644856] EXT4-fs (sda2): internal journal on sda2:8
[ 1.644864] EXT4-fs (sda2): delayed allocation enabled
[ 1.644871] EXT4-fs: file extents enabled
[ 1.646560] EXT4-fs: mballoc enabled
[ 1.646582] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 1.705886] usb 1-4: New USB device found, idVendor=0930, idProduct=6540
[ 1.705891] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.705895] usb 1-4: Product: TransMemory
[ 1.705898] usb 1-4: Manufacturer: TOSHIBA
[ 1.705901] usb 1-4: SerialNumber: 0640377110910964
[ 1.706037] usb 1-4: configuration #1 chosen from 1 choice
[ 1.706496] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.706752] usb-storage: device found at 5
[ 1.706756] usb-storage: waiting for device to settle before scanning
[ 1.912033] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.090237] usb 2-1: New USB device found, idVendor=0a12, idProduct=0001
[ 2.090243] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.090380] usb 2-1: configuration #1 chosen from 1 choice
[ 2.300037] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 2.471213] usb 2-2: New USB device found, idVendor=045e, idProduct=009d
[ 2.471220] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.471226] usb 2-2: Product: Microsoft Wireless Optical Desktop® 2.10
[ 2.471231] usb 2-2: Manufacturer: Microsoft
[ 2.471370] usb 2-2: configuration #1 chosen from 1 choice
[ 2.488607] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0
[ 2.488715] microsoft 0003:045E:009D.0001: input,hidraw0: USB HID v1.11
Keyboard [Microsoft Microsoft Wireless Optical Desktop® 2.10] on
usb-0000:00:1d.0-2/input0
[ 2.489899] scsi 4:0:0:0: Direct-Access Generic USB2.0 8.07
PQ: 0 ANSI: 2
[ 2.491489] sd 4:0:0:0: [sdb] 2057216 512-byte logical blocks: (1.05
GB/1004 MiB)
[ 2.491984] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.491989] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2.491994] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.492386] usb-storage: device scan complete
[ 2.494110] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.494127] sdb:
[ 2.578864] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1
[ 2.579015] microsoft 0003:045E:009D.0002: input,hidraw1: USB HID v1.11
Mouse [Microsoft Microsoft Wireless Optical Desktop® 2.10] on
usb-0000:00:1d.0-2/input1
[ 2.706640] scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory 6.50
PQ: 0 ANSI: 0 CCS
[ 2.707486] sd 5:0:0:0: [sdc] 3903487 512-byte logical blocks: (1.99
GB/1.86 GiB)
[ 2.707978] sd 5:0:0:0: [sdc] Write Protect is off
[ 2.707984] sd 5:0:0:0: [sdc] Mode Sense: 45 00 00 08
[ 2.707989] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.709256] usb-storage: device scan complete
[ 2.709731] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.709750] sdc: sdc1
[ 2.712104] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.712118] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 2.714479] sdb1
[ 2.721729] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.721746] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.263568] preloadtrace: systemtap: 0.9.9/0.142, base: f7f8f000, memory:
34052+77432+22160+13600 data+text+ctx+net, probes: 34
[ 4.827763] udev: starting version 146
[ 4.868857] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 4.869370] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 4.871811] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 4.877910] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 4.877915] Copyright (c) 2007 Atheros Corporation.
[ 4.878039] atl2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.878053] atl2 0000:02:00.0: setting latency timer to 64
[ 4.892080] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.892166] ACPI: Power Button [PWRF]
[ 4.892274] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.892315] ACPI: Power Button [PWRB]
[ 5.021149] Floppy drive(s): fd0 is 1.44M
[ 5.035325] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.035371] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 5.035413] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.035455] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 5.035829] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.037190] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 5.037225] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.039571] FDC 0 is a post-1991 82077
[ 5.053386] intel_rng: FWH not detected
[ 5.057628] parport_pc 00:07: reported by Plug and Play ACPI
[ 5.057739] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 5.070800] Bluetooth: Core ver 2.15
[ 5.073605] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2
cdda tray
[ 5.073612] Uniform CD-ROM driver Revision: 3.20
[ 5.073765] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 5.073853] NET: Registered protocol family 31
[ 5.073856] Bluetooth: HCI device and connection manager initialized
[ 5.073860] Bluetooth: HCI socket layer initialized
[ 5.083315] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 5.083444] usbcore: registered new interface driver btusb
[ 5.143042] iTCO_vendor_support: vendor-support=0
[ 5.144640] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 5.144763] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0860)
[ 5.144843] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.163075] saa7146: register extension 'budget_ci dvb'.
[ 5.165599] ppdev: user-space parallel port driver
[ 5.167174] budget_ci dvb 0000:01:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 5.167229] IRQ 17/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 5.167244] saa7146: found saa7146 @ mem f881ec00 (revision 1, irq 17)
(0x13c2,0x1019).
[ 5.167254] saa7146 (0): dma buffer size 192512
[ 5.167258] DVB: registering new adapter (TT-Budget S2-3200 PCI)
[ 5.186103] adapter has MAC addr = 00:d0:5c:64:a7:3a
[ 5.186913] input: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:1e.0/0000:01:00.0/input/input5
[ 8.703883] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.709491] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) ->
IRQ 23
[ 9.831371] stb0899_attach: Attaching STB0899
[ 9.848076] stb6100_attach: Attaching STB6100
[ 9.872406] LNBx2x attached on addr=8
[ 9.872413] DVB: registering adapter 0 frontend 0 (STB0899
Multistandard)...
[ 10.092329] Adding 10485496k swap on /dev/sda3. Priority:-1 extents:1
across:10485496k
[ 10.576226] device-mapper: uevent: version 1.0.3
[ 10.576425] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 10.777448] loop: module loaded
[ 11.011001] fuse init (API version 7.12)
[ 12.618662] type=1505 audit(1262181475.231:2): operation="profile_load"
pid=1047 name=/bin/ping
[ 12.690796] type=1505 audit(1262181475.303:3): operation="profile_load"
pid=1048 name=/sbin/klogd
[ 12.795113] type=1505 audit(1262181475.408:4): operation="profile_load"
pid=1049 name=/sbin/syslog-ng
[ 12.897724] type=1505 audit(1262181475.510:5): operation="profile_load"
pid=1050 name=/sbin/syslogd
[ 13.000219] type=1505 audit(1262181475.613:6): operation="profile_load"
pid=1051 name=/usr/sbin/avahi-daemon
[ 13.105214] type=1505 audit(1262181475.718:7): operation="profile_load"
pid=1052 name=/usr/sbin/identd
[ 13.200792] type=1505 audit(1262181475.813:8): operation="profile_load"
pid=1053 name=/usr/sbin/mdnsd
[ 13.307549] type=1505 audit(1262181475.920:9): operation="profile_load"
pid=1054 name=/usr/sbin/nscd
[ 13.461335] type=1505 audit(1262181476.074:10): operation="profile_load"
pid=1055 name=/usr/sbin/ntpd
[ 13.566301] type=1505 audit(1262181476.179:11): operation="profile_load"
pid=1056 name=/usr/sbin/traceroute
[ 15.367161] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.457898] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.493746] nf_conntrack version 0.5.0 (15833 buckets, 63332 max)
[ 15.493891] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 15.493900] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
module option or
[ 15.493907] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 18.005668] powernow: This module only works with AMD K7 CPUs
[ 18.700370] [drm] Initialized drm 1.1.0 20060810
[ 18.756021] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.756035] pci 0000:00:02.0: setting latency timer to 64
[ 18.759542] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 19.257591] alloc irq_desc for 26 on node 0
[ 19.257598] alloc kstat_irqs on node 0
[ 19.257639] atl2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 19.258044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.462361] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 19.462673] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.613600] NET: Registered protocol family 17
[ 28.104213] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 28.595268] Bluetooth: L2CAP ver 2.13
[ 28.595279] Bluetooth: L2CAP socket layer initialized
[ 28.892954] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.892966] Bluetooth: BNEP filters: protocol multicast
[ 29.484008] eth0: no IPv6 routers present
[ 30.028120] Bridge firewalling registered
[ 30.324679] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.324691] Bluetooth: SCO socket layer initialized
[ 30.624625] Bluetooth: RFCOMM TTY layer initialized
[ 30.624641] Bluetooth: RFCOMM socket layer initialized
[ 30.624649] Bluetooth: RFCOMM ver 1.11
[ 30.903840] bootsplash: status on console 0 changed to on
[ 34.647778] CPU0 attaching NULL sched-domain.
[ 34.647787] CPU1 attaching NULL sched-domain.
[ 34.651139] CPU0 attaching sched-domain:
[ 34.651146] domain 0: span 0-1 level MC
[ 34.651151] groups: 0 1
[ 34.651160] domain 1: span 0-1 level NODE
[ 34.651165] groups: 0-1
[ 34.651174] CPU1 attaching sched-domain:
[ 34.651178] domain 0: span 0-1 level MC
[ 34.651183] groups: 1 0
[ 34.651191] domain 1: span 0-1 level NODE
[ 34.651196] groups: 0-1
[ 193.214449] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10474 DF PROTO=TCP SPT=45217 DPT=80
WINDOW=1554 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE5EDEA072888C)
[ 198.934057] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49261 DF PROTO=TCP SPT=45220 DPT=80
WINDOW=544 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE7536A0728986)
[ 199.501040] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=59289 DF PROTO=TCP SPT=45221 DPT=80
WINDOW=544 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE776DA0728986)
[ 200.580046] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37629 DF PROTO=TCP SPT=45215 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFE7BA4A072888C)
[ 201.850057] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=63.245.209.93
LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=11378 DF PROTO=TCP SPT=60031 DPT=80
WINDOW=6948 RES=0x00 ACK FIN URGP=0
[ 214.423044] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30672 DF PROTO=TCP SPT=45218 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFEB1B7A072888C)
[ 244.600050] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=212.58.226.75
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16315 DF PROTO=TCP SPT=37020 DPT=80
WINDOW=997 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFF2798437A8FC9)
[ 248.815294] DVB: adapter 0 frontend 0 symbol rate 4800000 out of range
(5000000..45000000)
[ 249.024289] DVB: adapter 0 frontend 0 symbol rate 4800000 out of range
(5000000..45000000)
[ 259.390044] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10475 DF PROTO=TCP SPT=45217 DPT=80
WINDOW=1554 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFF615EA072888C)
[ 274.180042] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37630 DF PROTO=TCP SPT=45215 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFF9B24A072888C)
[ 301.975042] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30673 DF PROTO=TCP SPT=45218 DPT=80
WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A000007B7A072888C)
[ 313.450051] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.2.100 DST=83.168.206.53
LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34625 DF PROTO=TCP SPT=45206 DPT=80
WINDOW=1454 RES=0x00 ACK FIN URGP=0 OPT (0101080A0000348AA0728A81)
linux-o2b8:~ #
linux-o2b8:~ # lsmod
Module Size Used by
ip6t_LOG 6468 6
xt_tcpudp 3136 2
xt_pkttype 1632 3
xt_physdev 2384 2
ipt_LOG 6276 6
xt_limit 2692 12
rfcomm 75312 4
sco 20004 2
bridge 63476 1
stp 2532 1 bridge
llc 7020 2 bridge,stp
bnep 18624 2
l2cap 43168 16 rfcomm,bnep
snd_pcm_oss 51616 0
snd_mixer_oss 19072 1 snd_pcm_oss
snd_seq 64752 0
snd_seq_device 8620 1 snd_seq
edd 10472 0
af_packet 23424 0
i915 248968 1
drm 184896 2 i915
i2c_algo_bit 6884 1 i915
video 24600 1 i915
cpufreq_conservative 8396 0
cpufreq_userspace 3332 0
cpufreq_powersave 1568 0
acpi_cpufreq 9452 0
speedstep_lib 5092 0
ip6t_REJECT 5472 3
nf_conntrack_ipv6 22036 4
ip6table_raw 3008 1
xt_NOTRACK 1632 4
ipt_REJECT 3168 3
xt_state 2208 8
iptable_raw 2848 1
iptable_filter 3616 1
ip6table_mangle 4160 0
nf_conntrack_netbios_ns 2560 0
nf_conntrack_ipv4 11688 4
nf_conntrack 85660 5
nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 2112 1 nf_conntrack_ipv4
ip_tables 13392 2 iptable_raw,iptable_filter
ip6table_filter 3616 1
ip6_tables 14832 4
ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables 19524 12
ip6t_LOG,xt_tcpudp,xt_pkttype,xt_physdev,ipt_LOG,xt_limit,ip6t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables
fuse 74268 3
loop 17228 0
dm_mod 84804 0
lnbp21 2816 1
stb6100 7780 1
stb0899 37252 1
snd_hda_codec_realtek 233604 1
ppdev 10276 0
budget_ci 25240 0
budget_core 10628 1 budget_ci
iTCO_wdt 12164 0
iTCO_vendor_support 3876 1 iTCO_wdt
dvb_core 98692 2 budget_ci,budget_core
saa7146 19880 2 budget_ci,budget_core
ttpci_eeprom 2144 1 budget_core
btusb 16916 2
bluetooth 103524 9 rfcomm,sco,bnep,l2cap,btusb
parport_pc 40356 0
serio_raw 6276 0
sr_mod 17572 0
cdrom 40768 1 sr_mod
ir_common 49284 1 budget_ci
pcspkr 2784 0
sg 32884 0
joydev 11232 0
i2c_i801 12788 0
parport 39948 2 ppdev,parport_pc
floppy 61220 0
rfkill 22772 1 bluetooth
snd_hda_intel 31584 2
snd_hda_codec 94688 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 8708 1 snd_hda_codec
snd_pcm 96324 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 25960 2 snd_seq,snd_pcm
snd 75236 14
snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
asus_atk0110 13888 0
button 6608 0
atl2 30264 0
snd_page_alloc 10600 2 snd_hda_intel,snd_pcm
intel_agp 31012 1
ext4 359524 1
jbd2 95584 1 ext4
crc16 1952 1 ext4
fan 5028 0
processor 50576 1 acpi_cpufreq
ide_pci_generic 4036 0
piix 6760 0
ide_core 122572 2 ide_pci_generic,piix
ata_generic 4836 0
thermal 21084 0
thermal_sys 18344 4 video,fan,processor,thermal
linux-o2b8:~ #
linux-o2b8:~ # lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub [8086:2770] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ
Integrated Graphics Controller [8086:2772] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
01:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7146
[1131:7146] (rev 01)
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit
Ethernet Adapter [1969:2048] (rev a0)
linux-o2b8:~ #
I also want to communicate, I tried installing the v4l-dvb drivers and do not
work. The computer does not start, if you take the card starts. If way to get
a log of the boot of the computer that can display the error, even if the
interest is mine, I will be the provision. Thanks
reply other threads:[~2010-01-02 11:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201001021121.03197.armbaia@gmail.com \
--to=armbaia@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.