From: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
Subject: [PATCH 1/4] ar7: implement gpiolib
Date: Sun, 3 Jan 2010 21:16:51 +0100 [thread overview]
Message-ID: <201001032116.52819.florian@openwrt.org> (raw)
This patch implements gpiolib for the AR7 SoC.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9541171..bd80252 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -41,7 +41,7 @@ config AR7
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT_UART16550
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GCD
select VLYNQ
help
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index 74e14a3..0e9f4e1 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -1,6 +1,7 @@
/*
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -18,31 +19,113 @@
*/
#include <linux/module.h>
+#include <linux/gpio.h>
#include <asm/mach-ar7/gpio.h>
-static const char *ar7_gpio_list[AR7_GPIO_MAX];
+struct ar7_gpio_chip {
+ void __iomem *regs;
+ struct gpio_chip chip;
+};
-int gpio_request(unsigned gpio, const char *label)
+static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;
- if (ar7_gpio_list[gpio])
- return -EBUSY;
+ return readl(gpio_in) & (1 << gpio);
+}
+
+static void ar7_gpio_set_value(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_out = gpch->regs + AR7_GPIO_OUTPUT;
+ unsigned tmp;
+
+ tmp = readl(gpio_out) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, gpio_out);
+}
+
+static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
- if (label)
- ar7_gpio_list[gpio] = label;
- else
- ar7_gpio_list[gpio] = "busy";
+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
return 0;
}
-EXPORT_SYMBOL(gpio_request);
-void gpio_free(unsigned gpio)
+static int ar7_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
{
- BUG_ON(!ar7_gpio_list[gpio]);
- ar7_gpio_list[gpio] = NULL;
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
+
+ ar7_gpio_set_value(chip, gpio, value);
+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static struct ar7_gpio_chip ar7_gpio_chip = {
+ .chip = {
+ .label = "ar7-gpio",
+ .direction_input = ar7_gpio_direction_input,
+ .direction_output = ar7_gpio_direction_output,
+ .set = ar7_gpio_set_value,
+ .get = ar7_gpio_get_value,
+ .base = 0,
+ .ngpio = AR7_GPIO_MAX,
+ }
+};
+
+int ar7_gpio_enable(unsigned gpio)
+{
+ void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+ writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+ return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_enable);
+
+int ar7_gpio_disable(unsigned gpio)
+{
+ void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+ return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_disable);
+
+static int __init ar7_gpio_init(void)
+{
+ int ret;
+
+ ar7_gpio_chip.regs = ioremap_nocache(AR7_REGS_GPIO,
+ AR7_REGS_GPIO + 0x10);
+
+ if (!ar7_gpio_chip.regs) {
+ printk(KERN_ERR "ar7-gpio: failed to ioremap regs\n");
+ return -ENOMEM;
+ }
+
+ ret = gpiochip_add(&ar7_gpio_chip.chip);
+ if (ret) {
+ printk(KERN_ERR "ar7-gpio: failed to add gpiochip\n");
+ return ret;
+ }
+ printk(KERN_INFO "ar7-gpio: registered %d GPIOs\n",
+ ar7_gpio_chip.chip.ngpio);
+ return ret;
}
-EXPORT_SYMBOL(gpio_free);
+arch_initcall(ar7_gpio_init);
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 85169c0..acbe147 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -34,6 +34,7 @@
#include <linux/etherdevice.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
+#include <linux/gpio.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
index cbe9c4f..73f9b16 100644
--- a/arch/mips/include/asm/mach-ar7/gpio.h
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2009 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,88 +22,18 @@
#include <asm/mach-ar7/ar7.h>
#define AR7_GPIO_MAX 32
+#define NR_BUILTIN_GPIO AR7_GPIO_MAX
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
+#define gpio_to_irq(gpio) NULL
-/* Common GPIO layer */
-static inline int gpio_get_value(unsigned gpio)
-{
- void __iomem *gpio_in =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
- return readl(gpio_in) & (1 << gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- void __iomem *gpio_out =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
- unsigned tmp;
-
- tmp = readl(gpio_out) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, gpio_out);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- void __iomem *gpio_dir =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
-
- writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
-
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- void __iomem *gpio_dir =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
-
- gpio_set_value(gpio, value);
- writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
-
- return 0;
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return -EINVAL;
-}
+#define gpio_cansleep __gpio_cansleep
/* Board specific GPIO functions */
-static inline int ar7_gpio_enable(unsigned gpio)
-{
- void __iomem *gpio_en =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
- writel(readl(gpio_en) | (1 << gpio), gpio_en);
-
- return 0;
-}
-
-static inline int ar7_gpio_disable(unsigned gpio)
-{
- void __iomem *gpio_en =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
- writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
-
- return 0;
-}
+int ar7_gpio_enable(unsigned gpio);
+int ar7_gpio_disable(unsigned gpio);
#include <asm-generic/gpio.h>
next reply other threads:[~2010-01-03 20:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-03 20:16 Florian Fainelli [this message]
2010-01-26 12:50 ` [PATCH 1/4] ar7: implement gpiolib Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201001032116.52819.florian@openwrt.org \
--to=florian@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.