From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from poutre.nerim.net ([62.4.16.124]:56337 "EHLO poutre.nerim.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756215Ab0AFUVn (ORCPT ); Wed, 6 Jan 2010 15:21:43 -0500 Date: Wed, 6 Jan 2010 21:21:40 +0100 From: Jean Delvare To: Daro Cc: LMML Subject: Re: IR device at I2C address 0x7a Message-ID: <20100106212140.11b02d0f@hyperion.delvare> In-Reply-To: <4B44E026.3060906@aster.pl> References: <4B324EF0.7090606@aster.pl> <20100106153909.6bce3183@hyperion.delvare> <4B44CF62.5060405@aster.pl> <20100106194059.061636d3@hyperion.delvare> <4B44E026.3060906@aster.pl> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On Wed, 06 Jan 2010 20:10:30 +0100, Daro wrote: > W dniu 06.01.2010 19:40, Jean Delvare pisze: > > On Wed, 06 Jan 2010 18:58:58 +0100, Daro wrote: > > > >> It is not the error message itself that bothers me but the fact that IR > >> remote control device is not detected and I cannot use it (I checked it > >> on Windows and it's working). After finding this thread I thought it > >> could have had something to do with this error mesage. > >> Is there something that can be done to get my IR remote control working? > >> > > Did it ever work on Linux? > > I have no experience on that. I bought this card just few weeks ago and > tried it only on Karmic Koala. OK. You could try loading the saa7134 driver with option card=146 and see if it helps. -- Jean Delvare