From: "\"Juha Ylönen\"" <ylonen@gmx.net>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] batman-adv on different archs
Date: Mon, 18 Jan 2010 14:29:35 +0100 [thread overview]
Message-ID: <20100118132935.91200@gmx.net> (raw)
In-Reply-To: <20100118113954.GC7844@lunn.ch>
Hi,
And thanks for quick responses. Some comments below.
-------- Original-Nachricht --------
> Datum: Mon, 18 Jan 2010 12:39:54 +0100
> Von: Andrew Lunn <andrew@lunn.ch>
>
> What do you see in /proc/net/batman-adv/originiators on the three
> devices?
Here's what I see (or not see) in the laptop:
##:~$ cat /proc/net/batman-adv/interfaces
[ active] wlan0 00:22:fa:dc:9a:ce
##:~$ cat /proc/net/batman-adv/originators
Originator (#/255) Nexthop [outgoingIF]: Potential nexthops ... [B.A.T.M.A.N. adv 0.2, MainIF/MAC: wlan0/00:22:fa:dc:9a:ce]
No batman nodes in range ...
and in the device:
##> cat /proc/net/batman-adv/interfaces
[ active] eth1 00:11:f6:83:af:1c
##> cat /proc/net/batman-adv/originators
Originator (#/255) Nexthop [outgoingIF]: Potential nexthops ... [B.A.T.M.A.N. adv 0.2, MainIF/MAC: eth1/00:11:f6:83:af:1c]
No batman nodes in range ...
> Is the ARM device running in big endian or little endian mode?
The device is liitle endian. Could it be a problem in endianness? IIRC network stuff is usually big endian?
> Any kernel messages?
>
> You may want to rebuild the modules with debugging enabled, see the
> README and then enable it as described in the README.
I couldn't find any info on debug build in the README, and some instructions I came across in the wiki didn't really work, so I went and modified log.c directly to printk everything that is passed to debug_log.
In result I got a screenfulls of messages:
---
batman-adv: Received BATMAN packet via NB: 00:22:fa:dc:9a:ce, IF: eth1 [00:11:f6:83:af:1c] (from OG: 00:22:fa:dc:9a:ce, via prev OG: 00:22:fa:dc:9a:ce, seqno 30765, tq 255, TTL 50, V 8, IDF 0)
batman-adv: updating last_seqno: old 30764, new 30765
batman-adv: bidirectional: orig = 00:22:fa:dc:9a:ce neigh = 00:22:fa:dc:9a:ce => own_bcast = 0, real recv = 63, local tq: 0, asym_penalty: 255, total tq: 0
batman-adv: Forwarding packet: tq_orig: 0, tq_avg: 0, tq_forw: 0, ttl_orig: 49, ttl_forw: 49
batman-adv: Forwarding packet: rebroadcast neighbour packet with direct link flag
batman-adv: Forwarding packet (originator 00:22:fa:dc:9a:ce, seqno 30765, TQ 0, TTL 49, IDF on) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Sending own packet (originator 00:11:f6:83:af:1c, seqno 1569, TQ 255, TTL 50, IDF off) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Received BATMAN packet via NB: 00:22:fa:dc:9a:ce, IF: eth1 [00:11:f6:83:af:1c] (from OG: 00:22:fa:dc:9a:ce, via prev OG: 00:22:fa:dc:9a:ce, seqno 30766, tq 255, TTL 50, V 8, IDF 0)
batman-adv: updating last_seqno: old 30765, new 30766
batman-adv: bidirectional: orig = 00:22:fa:dc:9a:ce neigh = 00:22:fa:dc:9a:ce => own_bcast = 0, real recv = 63, local tq: 0, asym_penalty: 255, total tq: 0
batman-adv: Forwarding packet: tq_orig: 0, tq_avg: 0, tq_forw: 0, ttl_orig: 49, ttl_forw: 49
batman-adv: Forwarding packet: rebroadcast neighbour packet with direct link flag
batman-adv: Forwarding packet (originator 00:22:fa:dc:9a:ce, seqno 30766, TQ 0, TTL 49, IDF on) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Sending own packet (originator 00:11:f6:83:af:1c, seqno 1570, TQ 255, TTL 50, IDF off) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Received BATMAN packet via NB: 00:22:fa:dc:9a:ce, IF: eth1 [00:11:f6:83:af:1c] (from OG: 00:22:fa:dc:9a:ce, via prev OG: 00:22:fa:dc:9a:ce, seqno 30767, tq 255, TTL 50, V 8, IDF 0)
batman-adv: updating last_seqno: old 30766, new 30767
batman-adv: bidirectional: orig = 00:22:fa:dc:9a:ce neigh = 00:22:fa:dc:9a:ce => own_bcast = 0, real recv = 63, local tq: 0, asym_penalty: 255, total tq: 0
batman-adv: Forwarding packet: tq_orig: 0, tq_avg: 0, tq_forw: 0, ttl_orig: 49, ttl_forw: 49
batman-adv: Forwarding packet: rebroadcast neighbour packet with direct link flag
batman-adv: Forwarding packet (originator 00:22:fa:dc:9a:ce, seqno 30767, TQ 0, TTL 49, IDF on) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Sending own packet (originator 00:11:f6:83:af:1c, seqno 1571, TQ 255, TTL 50, IDF off) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Received BATMAN packet via NB: 00:22:fa:dc:9a:ce, IF: eth1 [00:11:f6:83:af:1c] (from OG: 00:22:fa:dc:9a:ce, via prev OG: 00:22:fa:dc:9a:ce, seqno 30768, tq 255, TTL 50, V 8, IDF 0)
batman-adv: updating last_seqno: old 30767, new 30768
batman-adv: bidirectional: orig = 00:22:fa:dc:9a:ce neigh = 00:22:fa:dc:9a:ce => own_bcast = 0, real recv = 63, local tq: 0, asym_penalty: 255, total tq: 0
batman-adv: Forwarding packet: tq_orig: 0, tq_avg: 0, tq_forw: 0, ttl_orig: 49, ttl_forw: 49
batman-adv: Forwarding packet: rebroadcast neighbour packet with direct link flag
batman-adv: Forwarding packet (originator 00:22:fa:dc:9a:ce, seqno 30768, TQ 0, TTL 49, IDF on) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Sending own packet (originator 00:11:f6:83:af:1c, seqno 1572, TQ 255, TTL 50, IDF off) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Received BATMAN packet via NB: 00:22:fa:dc:9a:ce, IF: eth1 [00:11:f6:83:af:1c] (from OG: 00:22:fa:dc:9a:ce, via prev OG: 00:22:fa:dc:9a:ce, seqno 30769, tq 255, TTL 50, V 8, IDF 0)
batman-adv: updating last_seqno: old 30768, new 30769
batman-adv: bidirectional: orig = 00:22:fa:dc:9a:ce neigh = 00:22:fa:dc:9a:ce => own_bcast = 0, real recv = 63, local tq: 0, asym_penalty: 255, total tq: 0
batman-adv: Forwarding packet: tq_orig: 0, tq_avg: 0, tq_forw: 0, ttl_orig: 49, ttl_forw: 49
batman-adv: Forwarding packet: rebroadcast neighbour packet with direct link flag
batman-adv: Forwarding packet (originator 00:22:fa:dc:9a:ce, seqno 30769, TQ 0, TTL 49, IDF on) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Sending own packet (originator 00:11:f6:83:af:1c, seqno 1573, TQ 255, TTL 50, IDF off) on interface eth1 [00:11:f6:83:af:1c]
batman-adv: Received BATMAN packet via NB: 00:22:fa:dc:9a:ce, IF: eth1 [00:11:f6:83:af:1c] (from OG: 00:22:fa:dc:9a:ce, via prev OG: 00:22:fa:dc:9a:ce, seqno 30770, tq 255, TTL 50, V 8, IDF 0)
batman-adv: updating last_seqno: old 30769, new 30770
batman-adv: bidirectional: orig = 00:22:fa:dc:9a:ce neigh = 00:22:fa:dc:9a:ce => own_bcast = 0, real recv = 63, local tq: 0, asym_penalty: 255, total tq: 0
---
Interestingly there seems to be packets coming and going from my laptop?
-Juha
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01
next prev parent reply other threads:[~2010-01-18 13:29 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-18 11:27 [B.A.T.M.A.N.] batman-adv on different archs "Juha Ylönen"
2010-01-18 11:39 ` Andrew Lunn
2010-01-18 13:29 ` "Juha Ylönen" [this message]
2010-01-18 13:38 ` Marek Lindner
2010-01-18 13:51 ` Andrew Lunn
2010-01-19 7:46 ` "Juha Ylönen"
2010-01-19 7:43 ` "Juha Ylönen"
2010-01-19 12:07 ` Marek Lindner
2010-01-19 14:51 ` "Juha Ylönen"
2010-01-19 15:11 ` Sven Eckelmann
[not found] ` <20100119153233.319500@gmx.net>
2010-01-19 17:12 ` Sven Eckelmann
2010-01-19 19:37 ` Simon Wunderlich
2010-01-20 14:05 ` "Juha Ylönen"
2010-01-20 21:58 ` Marek Lindner
2010-01-18 11:42 ` Marek Lindner
-- strict thread matches above, loose matches on Subject: below --
2010-01-19 14:58 "Juha Ylönen"
2010-01-20 2:15 ` Marek Lindner
2010-01-20 9:29 ` "Juha Ylönen"
2010-01-20 9:42 ` Marek Lindner
2010-01-20 9:49 ` Andrew Lunn
2010-01-20 9:51 ` Sven Eckelmann
2010-01-20 13:12 ` "Juha Ylönen"
2010-01-20 22:32 ` Marek Lindner
2010-01-21 14:12 ` "Juha Ylönen"
2010-01-21 15:29 ` Sven Eckelmann
2010-01-21 17:17 ` Gus Wirth
2010-01-21 18:32 ` Sven Eckelmann
2010-01-22 18:26 ` Simon Wunderlich
2010-01-24 21:19 ` "Juha Ylönen"
2010-01-21 19:02 "Juha Ylönen"
2010-01-22 12:16 ` Sven Eckelmann
2010-01-24 21:17 "Juha Ylönen"
2010-01-24 22:03 ` Sven Eckelmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100118132935.91200@gmx.net \
--to=ylonen@gmx.net \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.