From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Paul Walmsley <paul@pwsan.com>, linux-omap@vger.kernel.org
Subject: [PATCH 3/4] omap3: Fix cpu detection
Date: Wed, 20 Jan 2010 13:23:41 -0800 [thread overview]
Message-ID: <20100120212341.25335.46975.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100120212248.25335.55761.stgit@baageli.muru.com>
We need to set the omap_chip.oc carefully for the clocks to work.
To fix this, set the omap_chip.oc in omap3_check_features() based
on the CONTROL_IDCODE and silicon revision registers.
Also add handling for 34xx es3.1.2 as es3.1 for now.
Fixes booting on at least overo board.
Based on an earlier patch by Paul Walmsley <paul@pwsan.com>.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/id.c | 41 +++++++++++++++++++--------------
arch/arm/plat-omap/include/plat/cpu.h | 1 +
2 files changed, 24 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a091b53..3d65c50 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -188,6 +188,8 @@ void __init omap3_check_revision(void)
u16 hawkeye;
u8 rev;
+ omap_chip.oc = CHIP_IS_OMAP3430;
+
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@@ -196,6 +198,7 @@ void __init omap3_check_revision(void)
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES1;
return;
}
@@ -216,18 +219,28 @@ void __init omap3_check_revision(void)
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
break;
case 4:
+ omap_revision = OMAP3430_REV_ES3_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ break;
+ case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
- omap_revision = OMAP3430_REV_ES3_1;
+ omap_revision = OMAP3430_REV_ES3_1_2;
+
+ /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
}
break;
case 0xb868:
@@ -235,14 +248,18 @@ void __init omap3_check_revision(void)
*
* Set the device to be OMAP3505 here. Actual device
* is identified later based on the features.
+ *
+ * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
omap_revision = OMAP3505_REV(rev);
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 0xb891:
/* FALLTHROUGH */
default:
/* Unknown default to latest silicon rev as default*/
omap_revision = OMAP3630_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3630ES1;
}
}
@@ -360,6 +377,7 @@ void __init omap2_check_revision(void)
omap3_check_revision();
omap3_check_features();
omap3_cpuinfo();
+ return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
return;
@@ -374,27 +392,14 @@ void __init omap2_check_revision(void)
if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
+ return;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
- } else if (cpu_is_omap343x()) {
- omap_chip.oc = CHIP_IS_OMAP3430;
- if (omap_rev() == OMAP3430_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
- omap_rev() <= OMAP3430_REV_ES2_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
- else if (omap_rev() == OMAP3430_REV_ES3_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
- else if (omap_rev() == OMAP3430_REV_ES3_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
- else if (omap_rev() == OMAP3630_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
- } else {
- pr_err("Uninitialized omap_chip, please fix!\n");
+ return;
}
+
+ pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 9a028bd..a162f58 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -434,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP3430_REV_ES3_1_2 0x34305034
#define OMAP3630_REV_ES1_0 0x36300034
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] omap3: Fix cpu detection
Date: Wed, 20 Jan 2010 13:23:41 -0800 [thread overview]
Message-ID: <20100120212341.25335.46975.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100120212248.25335.55761.stgit@baageli.muru.com>
We need to set the omap_chip.oc carefully for the clocks to work.
To fix this, set the omap_chip.oc in omap3_check_features() based
on the CONTROL_IDCODE and silicon revision registers.
Also add handling for 34xx es3.1.2 as es3.1 for now.
Fixes booting on at least overo board.
Based on an earlier patch by Paul Walmsley <paul@pwsan.com>.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/id.c | 41 +++++++++++++++++++--------------
arch/arm/plat-omap/include/plat/cpu.h | 1 +
2 files changed, 24 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a091b53..3d65c50 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -188,6 +188,8 @@ void __init omap3_check_revision(void)
u16 hawkeye;
u8 rev;
+ omap_chip.oc = CHIP_IS_OMAP3430;
+
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@@ -196,6 +198,7 @@ void __init omap3_check_revision(void)
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES1;
return;
}
@@ -216,18 +219,28 @@ void __init omap3_check_revision(void)
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
break;
case 4:
+ omap_revision = OMAP3430_REV_ES3_1;
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ break;
+ case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
- omap_revision = OMAP3430_REV_ES3_1;
+ omap_revision = OMAP3430_REV_ES3_1_2;
+
+ /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
}
break;
case 0xb868:
@@ -235,14 +248,18 @@ void __init omap3_check_revision(void)
*
* Set the device to be OMAP3505 here. Actual device
* is identified later based on the features.
+ *
+ * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
omap_revision = OMAP3505_REV(rev);
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 0xb891:
/* FALLTHROUGH */
default:
/* Unknown default to latest silicon rev as default*/
omap_revision = OMAP3630_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP3630ES1;
}
}
@@ -360,6 +377,7 @@ void __init omap2_check_revision(void)
omap3_check_revision();
omap3_check_features();
omap3_cpuinfo();
+ return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
return;
@@ -374,27 +392,14 @@ void __init omap2_check_revision(void)
if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
+ return;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
- } else if (cpu_is_omap343x()) {
- omap_chip.oc = CHIP_IS_OMAP3430;
- if (omap_rev() == OMAP3430_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
- omap_rev() <= OMAP3430_REV_ES2_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
- else if (omap_rev() == OMAP3430_REV_ES3_0)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
- else if (omap_rev() == OMAP3430_REV_ES3_1)
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
- else if (omap_rev() == OMAP3630_REV_ES1_0)
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
- } else {
- pr_err("Uninitialized omap_chip, please fix!\n");
+ return;
}
+
+ pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 9a028bd..a162f58 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -434,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP3430_REV_ES3_1_2 0x34305034
#define OMAP3630_REV_ES1_0 0x36300034
next prev parent reply other threads:[~2010-01-20 21:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-20 21:23 [PATCH 0/4] omap fixes for 2.6.33-rc4 Tony Lindgren
2010-01-20 21:23 ` Tony Lindgren
2010-01-20 21:23 ` [PATCH 1/4] omap: Fix cmdline muxing Tony Lindgren
2010-01-20 21:23 ` Tony Lindgren
2010-01-20 21:23 ` [PATCH 2/4] omap: Fix functions for dynamic remuxing of pins Tony Lindgren
2010-01-20 21:23 ` Tony Lindgren
2010-01-20 21:23 ` Tony Lindgren [this message]
2010-01-20 21:23 ` [PATCH 3/4] omap3: Fix cpu detection Tony Lindgren
2010-01-20 21:23 ` [PATCH 4/4] OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch() Tony Lindgren
2010-01-20 21:23 ` Tony Lindgren
2010-01-21 2:08 ` [PATCH 5/4] omap: Enable GPMC clock in gpmc_init Tony Lindgren
2010-01-21 2:08 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100120212341.25335.46975.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.