* [PATCH v2 05/10] ARM: S5PV210: Update Kconfig and Makefiles
@ 2010-01-20 23:57 Kukjin Kim
2010-01-21 2:27 ` Ben Dooks
0 siblings, 1 reply; 2+ messages in thread
From: Kukjin Kim @ 2010-01-20 23:57 UTC (permalink / raw)
To: linux-samsung-soc; +Cc: ben-linux, Kukjin Kim
Updates arch/arm Kconfig and Makefile for building the S5PV210 support.
Also modifies the plat-s5p Kconfig file to include the support for plat-s5p
for S5PV210 SoC.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Kconfig | 12 +++++++++++-
arch/arm/Makefile | 1 +
arch/arm/plat-s5p/Kconfig | 2 +-
3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bc5169..6212c5b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -649,6 +649,14 @@ config ARCH_S5PC1XX
help
Samsung S5PC1XX series based systems
+config ARCH_S5PV210
+ bool "Samsung S5PV210/S5PC110"
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select CPU_V7
+ help
+ Samsung S5PV210/S5PC110 series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
@@ -811,6 +819,8 @@ if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
+source "arch/arm/mach-s5pv210/Kconfig"
+
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
@@ -1085,7 +1095,7 @@ source kernel/Kconfig.preempt
config HZ
int
default 128 if ARCH_L7200
- default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5PV210
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default 100
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bbcd512..c968bde 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -163,6 +163,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
+machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index e7c31e7..7a91c93 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
config PLAT_S5P
bool
- depends on ARCH_S5P6440
+ depends on (ARCH_S5P6440 || ARCH_S5PV210)
default y
select PLAT_S3C
select ARM_VIC
--
1.6.2.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2 05/10] ARM: S5PV210: Update Kconfig and Makefiles
2010-01-20 23:57 [PATCH v2 05/10] ARM: S5PV210: Update Kconfig and Makefiles Kukjin Kim
@ 2010-01-21 2:27 ` Ben Dooks
0 siblings, 0 replies; 2+ messages in thread
From: Ben Dooks @ 2010-01-21 2:27 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-samsung-soc, ben-linux
On Thu, Jan 21, 2010 at 08:57:10AM +0900, Kukjin Kim wrote:
> Updates arch/arm Kconfig and Makefile for building the S5PV210 support.
> Also modifies the plat-s5p Kconfig file to include the support for plat-s5p
> for S5PV210 SoC.
>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
> arch/arm/Kconfig | 12 +++++++++++-
> arch/arm/Makefile | 1 +
> arch/arm/plat-s5p/Kconfig | 2 +-
> 3 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 3bc5169..6212c5b 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -649,6 +649,14 @@ config ARCH_S5PC1XX
> help
> Samsung S5PC1XX series based systems
>
> +config ARCH_S5PV210
> + bool "Samsung S5PV210/S5PC110"
> + select GENERIC_GPIO
> + select HAVE_CLK
> + select CPU_V7
> + help
> + Samsung S5PV210/S5PC110 series based systems
> +
> config ARCH_SHARK
> bool "Shark"
> select CPU_SA110
> @@ -811,6 +819,8 @@ if ARCH_S5PC1XX
> source "arch/arm/mach-s5pc100/Kconfig"
> endif
>
> +source "arch/arm/mach-s5pv210/Kconfig"
> +
> source "arch/arm/mach-lh7a40x/Kconfig"
>
> source "arch/arm/mach-h720x/Kconfig"
> @@ -1085,7 +1095,7 @@ source kernel/Kconfig.preempt
> config HZ
> int
> default 128 if ARCH_L7200
> - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440
> + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5PV210
For fthe future, we should think about chnging this to something each
architecture can select... such as:
config HZ_DEFAULT_200
bool
config HZ
int
default 128 if ARCH_L7200
default 200 if HZ_DEFAULT_200
...
Note, not necessary for this round.
> default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
> default AT91_TIMER_HZ if ARCH_AT91
> default 100
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index bbcd512..c968bde 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -163,6 +163,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
> machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
> machine-$(CONFIG_ARCH_S5P6440) := s5p6440
> machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
> +machine-$(CONFIG_ARCH_S5PV210) := s5pv210
> machine-$(CONFIG_ARCH_SA1100) := sa1100
> machine-$(CONFIG_ARCH_SHARK) := shark
> machine-$(CONFIG_ARCH_STMP378X) := stmp378x
> diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
> index e7c31e7..7a91c93 100644
> --- a/arch/arm/plat-s5p/Kconfig
> +++ b/arch/arm/plat-s5p/Kconfig
> @@ -7,7 +7,7 @@
>
> config PLAT_S5P
> bool
> - depends on ARCH_S5P6440
> + depends on (ARCH_S5P6440 || ARCH_S5PV210)
> default y
> select PLAT_S3C
> select ARM_VIC
Let's change to select PLAT_S5P in all machines that need it and
remove the 'default y' statement from this.
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-01-21 2:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-20 23:57 [PATCH v2 05/10] ARM: S5PV210: Update Kconfig and Makefiles Kukjin Kim
2010-01-21 2:27 ` Ben Dooks
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.