From: Andrew Morton <akpm@linux-foundation.org>
To: "François Figarola" <francois.figarola@i-consult.fr>
Cc: linux-kernel@vger.kernel.org, Neil Brown <neilb@suse.de>,
linux-raid@vger.kernel.org, Al Viro <viro@zeniv.linux.org.uk>
Subject: Re: [BUG] kernel 2.6.32.x hangs during boot process
Date: Fri, 22 Jan 2010 16:07:40 -0800 [thread overview]
Message-ID: <20100122160740.6c16c22d.akpm@linux-foundation.org> (raw)
In-Reply-To: <d2deb3241001160158r4baed1e1t7e8f6642de018b4c@mail.gmail.com>
(cc's added)
On Sat, 16 Jan 2010 10:58:30 +0100
Fran__ois Figarola <francois.figarola@i-consult.fr> wrote:
> Dear all,
>
> First, I apologize por my poor english...
>
> Since I've tried to boot 2.6.32.x kernel, my system hangs during the
> boot process, and I think it could be related to the problem reported
> earlier by Megastorage (http://lkml.org/lkml/2010/1/10/92).
>
> The hardware is a Dell PowerEdge 2950 which runs fine with the
> 2.6.31.x kernel series (actually running with the latest 2.6.31.11),
> and the system is debian etch.
>
> Here is the trace of the bug I've got (using netconsole) with a
> 2.6.32.3 kernel :
>
> BUG: Dentry ffff880667690000{i=41a46,n=sleep} still in use (8)
> [unmount of ext3 dm-4]
> ------------[ cut here ]------------
> kernel BUG at fs/dcache.c:670!
That's
if (atomic_read(&dentry->d_count) != 0) {
printk(KERN_ERR
"BUG: Dentry %p{i=%lx,n=%s}"
" still in use (%d)"
" [unmount of %s %s]\n",
dentry,
dentry->d_inode ?
dentry->d_inode->i_ino : 0UL,
dentry->d_name.name,
atomic_read(&dentry->d_count),
dentry->d_sb->s_type->name,
dentry->d_sb->s_id);
BUG();
}
I'm a bit surprised that the system is doing a dm suspemd/resume during
the boot process.
I assume it's a DM bug, dunno.
> invalid opcode: 0000 [#1] SMP
> last sysfs file: /sys/block/dm-2/removable
> CPU 0
> Modules linked in: i5k_amb hwmon button processor thermal fan [last
> unloaded: scsi_wait_scan]
> Pid: 3311, comm: kpartx Not tainted 2.6.32.3 #2 PowerEdge 2950
> RIP: 0010:[<ffffffff810f95f0>] __[<ffffffff810f95f0>]
> shrink_dcache_for_umount_subtree+0x280/0x290
> RSP: 0018:ffff88066670dcf8 __EFLAGS: 00010296
> RAX: 000000000000005c RBX: ffff8806677696c0 RCX: 0000000000000096
> RDX: 0000000000006767 RSI: 0000000000000046 RDI: 0000000000000246
> RBP: ffff880667690000 R08: 0000000000000000 R09: ffff8806670d1628
> R10: 0000000000000000 R11: 0000000000000000 R12: ffff880667690060
> R13: 0000000000000007 R14: ffff8806654d1a88 R15: 0000000000dec0b0
> FS: __00007f176e96b770(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
> CS: __0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00007fff0a2e0080 CR3: 0000000666607000 CR4: 00000000000006f0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process kpartx (pid: 3311, threadinfo ffff88066670c000, task ffff8806652997d0)
> Stack:
> ffff880665b8b178 ffff880665b8af18 ffffffff81619600 0000000000000001
> <0> ffff880667408e00 ffffffff810f9629 ffff880665b8af18 ffffffff810e8049
> <0> ffff8806651333f8 ffff880667408e00 ffffffff8185fc00 ffffffff810e8159
> Call Trace:
> [<ffffffff810f9629>] ? shrink_dcache_for_umount+0x29/0x50
> [<ffffffff810e8049>] ? generic_shutdown_super+0x19/0x100
> [<ffffffff810e8159>] ? kill_block_super+0x29/0x50
> [<ffffffff810e8238>] ? deactivate_locked_super+0x58/0x80
> [<ffffffff81112842>] ? thaw_bdev+0xd2/0x110
> [<ffffffff814b0c67>] ? dm_resume+0xf7/0x160
> [<ffffffff814b5f00>] ? dev_suspend+0x0/0x220
> [<ffffffff814b60b1>] ? dev_suspend+0x1b1/0x220
> [<ffffffff814b6c7b>] ? ctl_ioctl+0x1eb/0x260
> [<ffffffff810c0b1b>] ? handle_mm_fault+0x63b/0x990
> [<ffffffff814b6cfe>] ? dm_ctl_ioctl+0xe/0x20
> [<ffffffff8104991a>] ? finish_task_switch+0x3a/0xc0
> [<ffffffff810f4e9f>] ? vfs_ioctl+0x2f/0xb0
> [<ffffffff810f53bb>] ? do_vfs_ioctl+0x3fb/0x580
> [<ffffffff815fb101>] ? thread_return+0x3e/0x64d
> [<ffffffff810f55e1>] ? sys_ioctl+0xa1/0xb0
> [<ffffffff8100bf02>] ? system_call_fastpath+0x16/0x1b
> Code: 4d 38 48 8b 45 10 48 85 c0 74 04 48 8b 50 40 48 8d 86 60 02 00
> 00 48 c7 c7 a8 66 76 81 48 89 04 24 48 89 ee 31 c0 e8 a9 11 50 00 <0f>
> 0b eb fe 0f 0b eb fe 0f 1f 84 00 00 00 00 00 53 48 89 fb 48
> RIP __[<ffffffff810f95f0>] shrink_dcache_for_umount_subtree+0x280/0x290
> RSP <ffff88066670dcf8>
> ---[ end trace 3cc1cb65fcc6a8ca ]---
>
> another trace with same behavior on a new compiled kernel with more
> debug options;
> but I can't see any difference :
>
> BUG: Dentry ffff880667556738{i=41a46,n=sleep} still in use (8)
> [unmount of ext3 dm-4]
> ------------[ cut here ]------------
> kernel BUG at fs/dcache.c:670!
> invalid opcode: 0000 [#1] SMP
> last sysfs file: /sys/block/dm-3/removable
> CPU 1
> Modules linked in: i5k_amb(+) button hwmon processor thermal fan [last
> unloaded: scsi_wait_scan]
> Pid: 3315, comm: kpartx Not tainted 2.6.32.3 #3 PowerEdge 2950
> RIP: 0010:[<ffffffff810f95f0>] __[<ffffffff810f95f0>]
> shrink_dcache_for_umount_subtree+0x280/0x290
> RSP: 0018:ffff880667089cf8 __EFLAGS: 00010296
> RAX: 000000000000005c RBX: ffff880667790a60 RCX: 0000000000000096
> RDX: 0000000000006767 RSI: 0000000000000046 RDI: 0000000000000246
> RBP: ffff880667556738 R08: 0000000000000000 R09: ffff88066604b420
> R10: 0000000000000000 R11: 0000000000000000 R12: ffff880667556798
> R13: 0000000000000007 R14: ffff880665842360 R15: 0000000000b3c0b0
> FS: __00007f7b1006c770(0000) GS:ffff880028240000(0000) knlGS:0000000000000000
> CS: __0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00007f6e67f1c350 CR3: 0000000664ff1000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process kpartx (pid: 3315, threadinfo ffff880667088000, task ffff880664f55f40)
> Stack:
> ffff880667058af0 ffff880667058890 ffffffff81619600 0000000000000001
> <0> ffff880667408e00 ffffffff810f9629 ffff880667058890 ffffffff810e8049
> <0> ffff88067f83e758 ffff880667408e00 ffffffff8185fc00 ffffffff810e8159
> Call Trace:
> [<ffffffff810f9629>] ? shrink_dcache_for_umount+0x29/0x50
> [<ffffffff810e8049>] ? generic_shutdown_super+0x19/0x100
> [<ffffffff810e8159>] ? kill_block_super+0x29/0x50
> [<ffffffff810e8238>] ? deactivate_locked_super+0x58/0x80
> [<ffffffff81112842>] ? thaw_bdev+0xd2/0x110
> [<ffffffff814b0c67>] ? dm_resume+0xf7/0x160
> [<ffffffff814b5f00>] ? dev_suspend+0x0/0x220
> [<ffffffff814b60b1>] ? dev_suspend+0x1b1/0x220
> [<ffffffff814b6c7b>] ? ctl_ioctl+0x1eb/0x260
> [<ffffffff810c0b1b>] ? handle_mm_fault+0x63b/0x990
> [<ffffffff814b6cfe>] ? dm_ctl_ioctl+0xe/0x20
> [<ffffffff8104991a>] ? finish_task_switch+0x3a/0xc0
> [<ffffffff810f4e9f>] ? vfs_ioctl+0x2f/0xb0
> [<ffffffff810f53bb>] ? do_vfs_ioctl+0x3fb/0x580
> [<ffffffff815fb101>] ? thread_return+0x3e/0x64d
> [<ffffffff810f55e1>] ? sys_ioctl+0xa1/0xb0
> [<ffffffff8100bf02>] ? system_call_fastpath+0x16/0x1b
> Code: 4d 38 48 8b 45 10 48 85 c0 74 04 48 8b 50 40 48 8d 86 60 02 00
> 00 48 c7 c7 a8 66 76 81 48 89 04 24 48 89 ee 31 c0 e8 a9 11 50 00 <0f>
> 0b eb fe 0f 0b eb fe 0f 1f 84 00 00 00 00 00 53 48 89 fb 48
> RIP __[<ffffffff810f95f0>] shrink_dcache_for_umount_subtree+0x280/0x290
> RSP <ffff880667089cf8>
> ---[ end trace a9fb3c2286e56cbd ]---
>
>
> I think the problem should be related with lvm or device mapper because
> I could start perfectly a 2.6.32.2 kernel on another PowerEdge 2950
> without any kind of lvm or dm configured...
> but I'm really not expert with kernel debug.
>
> Here is the fstab of the buggy system :
>
> # /etc/fstab: static file system information.
> #
> # <file system> <mount point> __ <type> __<options> __ __ __ <dump> __<pass>
> proc __ __ __ __ __ __/proc __ __ __ __ __ proc __ __defaults __ __ __ __0 __ __ __ 0
> /dev/dm-4 __ __ __ / __ __ __ __ __ __ __ ext3 __ __errors=remount-ro 0 __ __ __ 1
> /dev/dm-1 __ __ __ /boot __ __ __ __ __ ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-7 __ __ __ /home __ __ __ __ __ ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-5 __ __ __ /usr __ __ __ __ __ __ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-6 __ __ __ /var __ __ __ __ __ __ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-2 __ __ __ none __ __ __ __ __ __swap __ __sw __ __ __ __ __ __ __0 __ __ __ 0
> /dev/hda __ __ __ __/media/cdrom0 __ udf,iso9660 user,noauto __ __ 0 __ __ __ 0
> debugfs /sys/kernel/debug debugfs noauto 0 0
>
> I hope it can help, and try to give us more informations if necessary.
>
> Fran__ois.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2010-01-23 0:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-16 9:58 [BUG] kernel 2.6.32.x hangs during boot process François Figarola
2010-01-23 0:07 ` Andrew Morton [this message]
2010-01-28 2:42 ` Neil Brown
2010-01-28 6:32 ` [dm-devel] " Jun'ichi Nomura
2010-01-28 18:16 ` Thomas Backlund
2010-01-28 18:25 ` Christoph Hellwig
2010-01-29 0:56 ` [BUGFIX] [PATCH] freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb Jun'ichi Nomura
2010-01-30 18:44 ` Thomas Backlund
2010-01-29 7:06 ` [dm-devel] [BUG] kernel 2.6.32.x hangs during boot process François Figarola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100122160740.6c16c22d.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=francois.figarola@i-consult.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.