From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 24/68] ide: change ->cable_detect method return type to 'int'
Date: Fri, 29 Jan 2010 17:05:44 +0100 [thread overview]
Message-ID: <20100129160544.21495.34179.sendpatchset@localhost> (raw)
In-Reply-To: <20100129160308.21495.14120.sendpatchset@localhost>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: change ->cable_detect method return type to 'int'
Change ->cable_detect method return type to match ->cable_detect method
used in struct ata_port_operations.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/aec62xx.c | 2 +-
drivers/ide/alim15x3.c | 2 +-
drivers/ide/amd74xx.c | 2 +-
drivers/ide/atiixp.c | 2 +-
drivers/ide/cmd64x.c | 2 +-
drivers/ide/cs5535.c | 2 +-
drivers/ide/cs5536.c | 2 +-
drivers/ide/hpt366.c | 2 +-
drivers/ide/it8213.c | 2 +-
drivers/ide/it821x.c | 2 +-
drivers/ide/jmicron.c | 2 +-
drivers/ide/palm_bk3710.c | 2 +-
drivers/ide/pdc202xx_new.c | 2 +-
drivers/ide/pdc202xx_old.c | 2 +-
drivers/ide/piix.c | 2 +-
drivers/ide/pmac.c | 2 +-
drivers/ide/scc_pata.c | 2 +-
drivers/ide/serverworks.c | 2 +-
drivers/ide/siimage.c | 2 +-
drivers/ide/sis5513.c | 2 +-
drivers/ide/slc90e66.c | 2 +-
drivers/ide/tc86c001.c | 2 +-
drivers/ide/tx4939ide.c | 2 +-
drivers/ide/via82cxxx.c | 2 +-
include/linux/ide.h | 2 +-
25 files changed, 25 insertions(+), 25 deletions(-)
Index: b/drivers/ide/aec62xx.c
===================================================================
--- a/drivers/ide/aec62xx.c
+++ b/drivers/ide/aec62xx.c
@@ -160,7 +160,7 @@ static int init_chipset_aec62xx(struct p
return 0;
}
-static u8 atp86x_cable_detect(ide_hwif_t *hwif)
+static int atp86x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
Index: b/drivers/ide/alim15x3.c
===================================================================
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -317,7 +317,7 @@ out:
* of UDMA66 transfers. It doesn't check the drives.
*/
-static u8 ali_cable_detect(ide_hwif_t *hwif)
+static int ali_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 cbl = ATA_CBL_PATA40, tmpbyte;
Index: b/drivers/ide/amd74xx.c
===================================================================
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -178,7 +178,7 @@ static int init_chipset_amd74xx(struct p
return 0;
}
-static u8 amd_cable_detect(ide_hwif_t *hwif)
+static int amd_cable_detect(ide_hwif_t *hwif)
{
if ((amd_80w >> hwif->channel) & 1)
return ATA_CBL_PATA80;
Index: b/drivers/ide/atiixp.c
===================================================================
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -120,7 +120,7 @@ static void atiixp_set_dma_mode(ide_hwif
spin_unlock_irqrestore(&atiixp_lock, flags);
}
-static u8 atiixp_cable_detect(ide_hwif_t *hwif)
+static int atiixp_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u8 udma_mode = 0, ch = hwif->channel;
Index: b/drivers/ide/cmd64x.c
===================================================================
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -312,7 +312,7 @@ static int init_chipset_cmd64x(struct pc
return 0;
}
-static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
+static int cmd64x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
Index: b/drivers/ide/cs5535.c
===================================================================
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -153,7 +153,7 @@ static void cs5535_set_pio_mode(ide_hwif
cs5535_set_speed(drive, drive->pio_mode);
}
-static u8 cs5535_cable_detect(ide_hwif_t *hwif)
+static int cs5535_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bit;
Index: b/drivers/ide/cs5536.c
===================================================================
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -110,7 +110,7 @@ static void cs5536_program_dtc(ide_drive
* Returns a cable type.
*/
-static u8 cs5536_cable_detect(ide_hwif_t *hwif)
+static int cs5536_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 cfg;
Index: b/drivers/ide/hpt366.c
===================================================================
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -1215,7 +1215,7 @@ static int init_chipset_hpt366(struct pc
return 0;
}
-static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
+static int hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
Index: b/drivers/ide/it8213.c
===================================================================
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -140,7 +140,7 @@ static void it8213_set_dma_mode(ide_hwif
}
}
-static u8 it8213_cable_detect(ide_hwif_t *hwif)
+static int it8213_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg42h = 0;
Index: b/drivers/ide/it821x.c
===================================================================
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -423,7 +423,7 @@ static void it821x_set_dma_mode(ide_hwif
* the needed logic onboard.
*/
-static u8 it821x_cable_detect(ide_hwif_t *hwif)
+static int it821x_cable_detect(ide_hwif_t *hwif)
{
/* The reference driver also only does disk side */
return ATA_CBL_PATA80;
Index: b/drivers/ide/jmicron.c
===================================================================
--- a/drivers/ide/jmicron.c
+++ b/drivers/ide/jmicron.c
@@ -26,7 +26,7 @@ typedef enum {
* Returns the cable type.
*/
-static u8 jmicron_cable_detect(ide_hwif_t *hwif)
+static int jmicron_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
Index: b/drivers/ide/palm_bk3710.c
===================================================================
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -274,7 +274,7 @@ static void __devinit palm_bk3710_chipin
palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
}
-static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
+static int palm_bk3710_cable_detect(ide_hwif_t *hwif)
{
return ATA_CBL_PATA80;
}
Index: b/drivers/ide/pdc202xx_new.c
===================================================================
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -180,7 +180,7 @@ static void pdcnew_set_pio_mode(ide_hwif
}
}
-static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
+static int pdcnew_cable_detect(ide_hwif_t *hwif)
{
if (get_indexed_reg(hwif, 0x0b) & 0x04)
return ATA_CBL_PATA40;
Index: b/drivers/ide/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -103,7 +103,7 @@ static int pdc202xx_test_irq(ide_hwif_t
}
}
-static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
+static int pdc2026x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
Index: b/drivers/ide/piix.c
===================================================================
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -243,7 +243,7 @@ static void ich_clear_irq(ide_drive_t *d
#include "../ata/ata_piix.h"
-static u8 piix_cable_detect(ide_hwif_t *hwif)
+static int piix_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
Index: b/drivers/ide/pmac.c
===================================================================
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -912,7 +912,7 @@ static int pmac_ide_do_resume(pmac_ide_h
return 0;
}
-static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
+static int pmac_ide_cable_detect(ide_hwif_t *hwif)
{
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
Index: b/drivers/ide/scc_pata.c
===================================================================
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -754,7 +754,7 @@ static int __devinit scc_init_dma(ide_hw
return ide_allocate_dma_engine(hwif);
}
-static u8 scc_cable_detect(ide_hwif_t *hwif)
+static int scc_cable_detect(ide_hwif_t *hwif)
{
return ATA_CBL_PATA80;
}
Index: b/drivers/ide/serverworks.c
===================================================================
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -301,7 +301,7 @@ static u8 ata66_svwks_cobalt(ide_hwif_t
return ATA_CBL_PATA40;
}
-static u8 svwks_cable_detect(ide_hwif_t *hwif)
+static int svwks_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
Index: b/drivers/ide/siimage.c
===================================================================
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -667,7 +667,7 @@ static void __devinit init_iops_siimage(
* Check for the presence of an ATA66 capable cable on the interface.
*/
-static u8 sil_cable_detect(ide_hwif_t *hwif)
+static int sil_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long addr = siimage_selreg(hwif, 0);
Index: b/drivers/ide/sis5513.c
===================================================================
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -508,7 +508,7 @@ static int init_chipset_sis5513(struct p
#include "../ata/pata_sis.h"
-static u8 sis_cable_detect(ide_hwif_t *hwif)
+static int sis_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u8 ata66 = 0;
Index: b/drivers/ide/slc90e66.c
===================================================================
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -115,7 +115,7 @@ static void slc90e66_set_dma_mode(ide_hw
}
}
-static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
+static int slc90e66_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
Index: b/drivers/ide/tc86c001.c
===================================================================
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -130,7 +130,7 @@ static void tc86c001_dma_start(ide_drive
ide_dma_start(drive);
}
-static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
+static int tc86c001_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long sc_base = pci_resource_start(dev, 5);
Index: b/drivers/ide/tx4939ide.c
===================================================================
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -189,7 +189,7 @@ static void tx4939ide_clear_irq(ide_driv
tx4939ide_writew(ctl, base, TX4939IDE_Int_Ctl);
}
-static u8 tx4939ide_cable_detect(ide_hwif_t *hwif)
+static int tx4939ide_cable_detect(ide_hwif_t *hwif)
{
void __iomem *base = TX4939IDE_BASE(hwif);
Index: b/drivers/ide/via82cxxx.c
===================================================================
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -352,7 +352,7 @@ static int init_chipset_via82cxxx(struct
#include "../ata/pata_via.h"
-static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
+static int via82cxxx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(pdev);
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -644,7 +644,7 @@ struct ide_port_ops {
u8 (*mdma_filter)(ide_drive_t *);
u8 (*udma_filter)(ide_drive_t *);
- u8 (*cable_detect)(struct hwif_s *);
+ int (*cable_detect)(struct hwif_s *);
};
struct ide_dma_ops {
next prev parent reply other threads:[~2010-01-29 16:05 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-29 16:03 [PATCH 00/68] ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 01/68] piix: add new short cable IDs Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 02/68] libata: CodingStyle fixes for ATA timings code Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 03/68] libata: move ATA timings code to ata-timings.c Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 04/68] ata: make ATA timings code independent of libata Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 05/68] ata: enable XFER_PIO_SLOW mode in ata_timing table Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 06/68] ide: switch to generic ATA timings code Bartlomiej Zolnierkiewicz
2010-01-29 16:03 ` [PATCH 07/68] pata_pcmcia: move IDs table to pata_pcmcia.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 08/68] ide-cs: use pata_pcmcia.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 09/68] ata_piix: factor out short cable detection code to ich_short_ata40() Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 10/68] ata_piix: move short cable handling to ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 11/68] piix: use ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 12/68] pata_ali: move short cable handling to pata_ali.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 13/68] alim15x3: use pata_ali.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 14/68] pata_sis: move short cable handling to pata_sis.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 15/68] sis5513: use pata_sis.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 16/68] pata_via: move short cable handling to pata_via.h Bartlomiej Zolnierkiewicz
2010-01-29 16:04 ` [PATCH 17/68] via82cxxx: use pata_via.h Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 18/68] ide: split host->dev table Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 19/68] ide: add hwif->port_no field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 20/68] ide: add hwif->udma_mask field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 21/68] ide: add hwif->private_data field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 22/68] ide: add drive->devno field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` [PATCH 23/68] ide: add drive->class field Bartlomiej Zolnierkiewicz
2010-01-29 16:05 ` Bartlomiej Zolnierkiewicz [this message]
2010-01-29 16:05 ` [PATCH 25/68] it8213: always program control bits Bartlomiej Zolnierkiewicz
2010-01-29 17:36 ` Sergei Shtylyov
2010-01-29 16:05 ` [PATCH 26/68] piix: " Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 27/68] slc90e66: " Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 28/68] add ide2libata header file Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 29/68] ata_piix: move code to be re-used by ide2libata to ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 30/68] piix: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 31/68] pata_ali: move code to be re-used by ide2libata to pata_ali.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 32/68] alim15x3: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 33/68] pata_amd: move code to be re-used by ide2libata to pata_amd.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 34/68] amd74xx: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 35/68] pata_artop: move code to be re-used by ide2libata to pata_artop.h Bartlomiej Zolnierkiewicz
2010-01-29 16:06 ` [PATCH 36/68] aec62xx: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 37/68] pata_atiixp: move code to be re-used by ide2libata to pata_atiixp.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 38/68] atiixp: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 39/68] pata_cmd64x: documentation fix Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 40/68] pata_cmd64x: move code to be re-used by ide2libata to pata_cmd64x.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 41/68] pata_cmd64x: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 42/68] pata_cs5520: move code to be re-used by ide2libata to pata_cs5520.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 43/68] cs5520: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 44/68] pata_cs5530: move code to be re-used by ide2libata to pata_cs5530.h Bartlomiej Zolnierkiewicz
2010-01-29 16:07 ` [PATCH 45/68] cs5530: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 46/68] pata_cs5535: move code to be re-used by ide2libata to pata_cs5535.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 47/68] cs5535: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 48/68] pata_cypress: move code to be re-used by ide2libata to pata_cypress.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 49/68] cy82c693: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 50/68] pata_efar: move code to be re-used by ide2libata to pata_efar.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 51/68] slc90e66: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 52/68] pata_it8213: move code to be re-used by ide2libata to pata_it8213.h Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 53/68] it8213: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:08 ` [PATCH 54/68] pata_it821x: move code to be re-used by ide2libata to pata_it821x.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 55/68] it821x: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 56/68] pata_pdc202xx_old: move code to be re-used by ide2libata to pata_pdc202xx_old.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 57/68] pdc202xx_old: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 58/68] pata_sc1200: move code to be re-used by ide2libata to pata_sc1200.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 59/68] sc1200: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 60/68] pata_serverworks: move cable handling to pata_serverworks.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 61/68] serverworks: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 62/68] pata_sl82c105: move code to be re-used by ide2libata to pata_sl82c105.h Bartlomiej Zolnierkiewicz
2010-01-29 16:09 ` [PATCH 63/68] sl82c105: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 64/68] pata_triflex: move code to be re-used by ide2libata to pata_triflex.h Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 65/68] triflex: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 66/68] pata_via: factor out code for finding ISA bridge Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 67/68] pata_via: move code to be re-used by ide2libata to pata_via.h Bartlomiej Zolnierkiewicz
2010-01-29 16:10 ` [PATCH 68/68] via82cxxx: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-29 21:40 ` [PATCH 00/68] ide2libata Jeff Garzik
2010-01-29 22:24 ` Bartlomiej Zolnierkiewicz
2010-01-29 23:25 ` Alan Cox
2010-01-30 15:24 ` Bartlomiej Zolnierkiewicz
2010-02-01 7:47 ` David Miller
2010-02-01 9:31 ` Bartlomiej Zolnierkiewicz
2010-02-01 11:07 ` Alan Cox
2010-02-01 11:17 ` David Miller
2010-02-01 11:48 ` Alan Cox
2010-02-01 12:48 ` David Miller
2010-02-01 12:58 ` Alan Cox
2010-02-01 13:14 ` David Miller
2010-02-02 23:10 ` Jeff Garzik
2010-02-02 23:19 ` David Miller
2010-02-02 23:27 ` Alan Cox
2010-02-02 23:29 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100129160544.21495.34179.sendpatchset@localhost \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.