From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/9] pata_cs5536: forward port changes from cs5536
Date: Sat, 30 Jan 2010 20:49:25 +0100 [thread overview]
Message-ID: <20100130194925.30779.34207.sendpatchset@localhost> (raw)
In-Reply-To: <20100130194918.30779.25485.sendpatchset@localhost>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_cs5536: forward port changes from cs5536
* Fix cable detection to also account for the slave device cable bit.
* Disable UDMA when programming MWDMA in cs5536_set_dmamode().
* Don't change UDMA settings in cs5536_set_piomode().
* Add cs5536_program_dtc() helper.
* Cleanup and uninline cs5536_[read,write]() methods.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ata/pata_cs5536.c | 99 +++++++++++++++++++---------------------------
1 file changed, 42 insertions(+), 57 deletions(-)
Index: b/drivers/ata/pata_cs5536.c
===================================================================
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -1,6 +1,7 @@
/*
* pata_cs5536.c - CS5536 PATA for new ATA layer
* (C) 2007 Martin K. Petersen <mkp@mkp.net>
+ * (C) 2010 Bartlomiej Zolnierkiewicz
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -43,24 +44,16 @@
#define DRV_VERSION "0.0.7"
enum {
- CFG = 0,
- DTC = 1,
- CAST = 2,
- ETC = 3,
-
- MSR_IDE_BASE = 0x51300000,
- MSR_IDE_CFG = (MSR_IDE_BASE + 0x10),
- MSR_IDE_DTC = (MSR_IDE_BASE + 0x12),
- MSR_IDE_CAST = (MSR_IDE_BASE + 0x13),
- MSR_IDE_ETC = (MSR_IDE_BASE + 0x14),
-
+ MSR_IDE_CFG = 0x51300010,
PCI_IDE_CFG = 0x40,
- PCI_IDE_DTC = 0x48,
- PCI_IDE_CAST = 0x4c,
- PCI_IDE_ETC = 0x50,
- IDE_CFG_CHANEN = 0x2,
- IDE_CFG_CABLE = 0x10000,
+ CFG = 0,
+ DTC = 2,
+ CAST = 3,
+ ETC = 4,
+
+ IDE_CFG_CHANEN = (1 << 1),
+ IDE_CFG_CABLE = (1 << 17) | (1 << 16),
IDE_D0_SHIFT = 24,
IDE_D1_SHIFT = 16,
@@ -72,47 +65,52 @@ enum {
IDE_CAST_CMD_MASK = 0xff,
IDE_CAST_CMD_SHIFT = 24,
- IDE_ETC_NODMA = 0x03,
+ IDE_ETC_UDMA_MASK = 0xc0,
};
static int use_msr;
-static const u32 msr_reg[4] = {
- MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
-};
-
-static const u8 pci_reg[4] = {
- PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC,
-};
-
-static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
{
if (unlikely(use_msr)) {
u32 dummy;
- rdmsr(msr_reg[reg], *val, dummy);
+ rdmsr(MSR_IDE_CFG + reg, *val, dummy);
return 0;
}
- return pci_read_config_dword(pdev, pci_reg[reg], val);
+ return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
}
-static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
+static int cs5536_write(struct pci_dev *pdev, int reg, int val)
{
if (unlikely(use_msr)) {
- wrmsr(msr_reg[reg], val, 0);
+ wrmsr(MSR_IDE_CFG + reg, val, 0);
return 0;
}
- return pci_write_config_dword(pdev, pci_reg[reg], val);
+ return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static void cs5536_program_dtc(struct ata_device *adev, u8 tim)
+{
+ struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev);
+ int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+ u32 dtc;
+
+ cs5536_read(pdev, DTC, &dtc);
+ dtc &= ~(IDE_DRV_MASK << dshift);
+ dtc |= tim << dshift;
+ cs5536_write(pdev, DTC, dtc);
}
/**
* cs5536_cable_detect - detect cable type
* @ap: Port to detect on
*
- * Perform cable detection for ATA66 capable cable. Return a libata
- * cable type.
+ * Perform cable detection for ATA66 capable cable.
+ *
+ * Returns a cable type.
*/
static int cs5536_cable_detect(struct ata_port *ap)
@@ -122,7 +120,7 @@ static int cs5536_cable_detect(struct at
cs5536_read(pdev, CFG, &cfg);
- if (cfg & (IDE_CFG_CABLE << ap->port_no))
+ if (cfg & IDE_CFG_CABLE)
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
@@ -152,19 +150,15 @@ static void cs5536_set_piomode(struct at
struct ata_device *pair = ata_dev_pair(adev);
int mode = adev->pio_mode - XFER_PIO_0;
int cmdmode = mode;
- int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
- u32 dtc, cast, etc;
+ u32 cast;
if (pair)
cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
- cs5536_read(pdev, DTC, &dtc);
- cs5536_read(pdev, CAST, &cast);
- cs5536_read(pdev, ETC, &etc);
+ cs5536_program_dtc(adev, drv_timings[mode]);
- dtc &= ~(IDE_DRV_MASK << dshift);
- dtc |= drv_timings[mode] << dshift;
+ cs5536_read(pdev, CAST, &cast);
cast &= ~(IDE_CAST_DRV_MASK << cshift);
cast |= addr_timings[mode] << cshift;
@@ -172,12 +166,7 @@ static void cs5536_set_piomode(struct at
cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
- etc &= ~(IDE_DRV_MASK << dshift);
- etc |= IDE_ETC_NODMA << dshift;
-
- cs5536_write(pdev, DTC, dtc);
cs5536_write(pdev, CAST, cast);
- cs5536_write(pdev, ETC, etc);
}
/**
@@ -198,25 +187,21 @@ static void cs5536_set_dmamode(struct at
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 dtc, etc;
+ u32 etc;
int mode = adev->dma_mode;
int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
- if (mode >= XFER_UDMA_0) {
- cs5536_read(pdev, ETC, &etc);
+ cs5536_read(pdev, ETC, &etc);
+ if (mode >= XFER_UDMA_0) {
etc &= ~(IDE_DRV_MASK << dshift);
etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
-
- cs5536_write(pdev, ETC, etc);
} else { /* MWDMA */
- cs5536_read(pdev, DTC, &dtc);
-
- dtc &= ~(IDE_DRV_MASK << dshift);
- dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift;
-
- cs5536_write(pdev, DTC, dtc);
+ etc &= ~(IDE_ETC_UDMA_MASK << dshift);
+ cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]);
}
+
+ cs5536_write(pdev, ETC, etc);
}
static struct scsi_host_template cs5536_sht = {
next prev parent reply other threads:[~2010-01-30 19:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-30 19:49 [PATCH 0/9] few more ide2libata patches Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` Bartlomiej Zolnierkiewicz [this message]
2010-01-30 19:49 ` [PATCH 2/9] pata_sil680: CodingStyle fixes Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 3/9] siimage: cleanup I/O helpers Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 4/9] [ata_]piix: move documentation to ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 5/9] ide2libata: add missing credits Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 6/9] pata_cs5536: move code to be re-used by ide2libata to pata_cs5536.h Bartlomiej Zolnierkiewicz
2010-01-30 19:50 ` [PATCH 7/9] cs5536: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-30 21:55 ` Jeff Garzik
2010-01-31 0:30 ` Bartlomiej Zolnierkiewicz
2010-01-30 19:50 ` [PATCH 8/9] pata_sil680: move code to be re-used by ide2libata to pata_sil680.h Bartlomiej Zolnierkiewicz
2010-01-30 19:50 ` [PATCH 9/9] siimage: convert to ide2libata Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100130194925.30779.34207.sendpatchset@localhost \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.