From: Yoichi Yuasa <yuasa@linux-mips.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: yuasa@linux-mips.org, linux-mips <linux-mips@linux-mips.org>,
Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Subject: [PATCH] MIPS: txx9: remove forced serial console setting
Date: Tue, 2 Feb 2010 18:40:04 +0900 [thread overview]
Message-ID: <20100202184004.efdff568.yuasa@linux-mips.org> (raw)
It is not always used, even if it is available.
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
---
arch/mips/include/asm/txx9/generic.h | 1 -
arch/mips/txx9/generic/setup.c | 5 -----
arch/mips/txx9/jmr3927/setup.c | 7 -------
arch/mips/txx9/rbtx4927/setup.c | 7 -------
arch/mips/txx9/rbtx4938/setup.c | 6 ------
5 files changed, 0 insertions(+), 26 deletions(-)
diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
index 827dc22..64887d3 100644
--- a/arch/mips/include/asm/txx9/generic.h
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -42,7 +42,6 @@ struct txx9_board_vec {
};
extern struct txx9_board_vec *txx9_board_vec;
extern int (*txx9_irq_dispatch)(int pending);
-char *prom_getcmdline(void);
const char *prom_getenv(const char *name);
void txx9_wdt_init(unsigned long base);
void txx9_wdt_now(unsigned long base);
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index e27809b..7174d83 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -399,11 +399,6 @@ const char *get_system_type(void)
return txx9_system_type;
}
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
const char *__init prom_getenv(const char *name)
{
const s32 *str;
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 25e50a7..3206f76 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -67,8 +67,6 @@ static void jmr3927_board_init(void);
static void __init jmr3927_mem_setup(void)
{
- char *argptr;
-
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
_machine_restart = jmr3927_machine_restart;
@@ -97,11 +95,6 @@ static void __init jmr3927_mem_setup(void)
jmr3927_board_init();
tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS1,115200");
-#endif
}
static void __init jmr3927_pci_setup(void)
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index ee468ea..b15adfc 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -187,8 +187,6 @@ static void __init rbtx4937_clock_init(void);
static void __init rbtx4927_mem_setup(void)
{
- char *argptr;
-
if (TX4927_REV_PCODE() == 0x4927) {
rbtx4927_clock_init();
tx4927_setup();
@@ -213,11 +211,6 @@ static void __init rbtx4927_mem_setup(void)
gpio_direction_output(15, 1);
tx4927_sio_init(0, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS0,38400");
-#endif
}
static void __init rbtx4927_clock_init(void)
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index d66509b..d6e70da 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -153,7 +153,6 @@ static void __init rbtx4938_time_init(void)
static void __init rbtx4938_mem_setup(void)
{
unsigned long long pcfg;
- char *argptr;
if (txx9_master_clock == 0)
txx9_master_clock = 25000000; /* 25MHz */
@@ -168,11 +167,6 @@ static void __init rbtx4938_mem_setup(void)
#endif
tx4938_sio_init(7372800, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS0,38400");
-#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
pr_info("PIOSEL: disabling both ATA and NAND selection\n");
--
1.6.6.1
next reply other threads:[~2010-02-02 9:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-02 9:40 Yoichi Yuasa [this message]
2010-02-02 14:41 ` [PATCH] MIPS: txx9: remove forced serial console setting Atsushi Nemoto
2010-02-02 15:04 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100202184004.efdff568.yuasa@linux-mips.org \
--to=yuasa@linux-mips.org \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.