From: Maciej Rutecki <maciej.rutecki@gmail.com>
To: Axel Uhl <axel.uhl@gmx.de>, linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: Kernel Bug in ATA or SMART area
Date: Thu, 11 Feb 2010 21:21:22 +0100 [thread overview]
Message-ID: <201002112121.22399.maciej.rutecki@gmail.com> (raw)
In-Reply-To: <4B72941A.7060704@gmx.de>
(CCs added)
Is older kernels work fine?
Dnia środa, 10 lutego 2010 o 12:10:18 Axel Uhl napisał(a):
> I get intermittent kernel exceptions, probably related to an issue with
> the ATA or SMART code in the kernel / modules. I have a cron job that
> every so many hours captures the disk temperatures. I "hdparm -y" my
> disks when they are not used. It seems that when the cron job runs that
> spins up the disks to access their temperature using smartctl, if during
> this time certain other interactions happen, the kernel raises an
> exception.
>
> The smartctl command I'm using is:
>
> /usr/sbin/smartctl -a $devfull >/var/local/snmp/smart-$dev.TMP
>
> Here is one such exception from the syslog:
>
> Feb 10 06:57:01 homemp3 /USR/SBIN/CRON[18271]: (root) CMD
> (/etc/snmp/local-snmp-cronjob-spinup)
> Feb 10 06:57:06 homemp3 vdr: [3293] connect from 127.0.0.1, port 59975 -
> accepted
> Feb 10 06:57:06 homemp3 vdr: [3293] closing SVDRP connection
> Feb 10 06:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0
> SErr 0x0 action 0x6 frozen
> Feb 10 06:57:09 homemp3 kernel: ata5.00: failed command: SMART
> Feb 10 06:57:09 homemp3 kernel: ata5.00: cmd
> b0/da:00:00:4f:c2/00:00:00:00:00/00
> tag 0
> Feb 10 06:57:09 homemp3 kernel: res
> 40/00:01:00:00:00/00:00:00:00:00/00
> Emask 0x4 (timeout)
> Feb 10 06:57:09 homemp3 kernel: ata5.00: status: { DRDY }
> Feb 10 06:57:10 homemp3 kernel: irq 10: nobody cared (try booting with
> the "irqpoll" option)
> Feb 10 06:57:10 homemp3 kernel: Pid: 17050, comm: hadam3p_um_6.14 Not
> tainted 2.6.32.7 #1
> Feb 10 06:57:10 homemp3 kernel: Call Trace:
> Feb 10 06:57:10 homemp3 kernel: [<c128a221>] ? printk+0x18/0x1a
> Feb 10 06:57:10 homemp3 kernel: [<c103aaf8>] __report_bad_irq+0x27/0x85
> Feb 10 06:57:10 homemp3 kernel: [<c103ac9e>] note_interrupt+0x148/0x186
> Feb 10 06:57:10 homemp3 kernel: [<c103b292>] handle_level_irq+0x86/0xb1
> Feb 10 06:57:10 homemp3 kernel: [<c1004722>] handle_irq+0x1a/0x28
> Feb 10 06:57:10 homemp3 kernel: [<c100434c>] do_IRQ+0x33/0x80
> Feb 10 06:57:10 homemp3 kernel: [<c11d73fb>] ? pdc_interrupt+0x150/0x3a5
> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30
> Feb 10 06:57:10 homemp3 kernel: [<c101cd72>] ? __do_softirq+0x33/0xec
> Feb 10 06:57:10 homemp3 kernel: [<c1039e00>] ? handle_IRQ_event+0x31/0xc1
> Feb 10 06:57:10 homemp3 kernel: [<c101ce55>] do_softirq+0x2a/0x2f
> Feb 10 06:57:10 homemp3 kernel: [<c101cf34>] irq_exit+0x2a/0x2f
> Feb 10 06:57:10 homemp3 kernel: [<c1004355>] do_IRQ+0x3c/0x80
> Feb 10 06:57:10 homemp3 kernel: [<c1003b81>] ?
> do_device_not_available+0x0/0x48
> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30
> Feb 10 06:57:10 homemp3 kernel: handlers:
> Feb 10 06:57:10 homemp3 kernel: [<c11d72ab>] (pdc_interrupt+0x0/0x3a5)
> Feb 10 06:57:10 homemp3 kernel: [<c11d3504>] (ata_sff_interrupt+0x0/0xc4)
> Feb 10 06:57:10 homemp3 kernel: [<f83a6767>] (azx_interrupt+0x0/0x11b
> [snd_hda_intel])
> Feb 10 06:57:10 homemp3 kernel: [<f8106471>] (usb_hcd_irq+0x0/0x5e
> [usbcore])
> Feb 10 06:57:10 homemp3 kernel: [<f8062bf9>] (e1000_intr+0x0/0xf2 [e1000])
> Feb 10 06:57:10 homemp3 kernel: Disabling IRQ #10
> Feb 10 06:57:10 homemp3 kernel: ata5: soft resetting link
> Feb 10 06:57:11 homemp3 kernel: ata5.00: configured for UDMA/133
> Feb 10 06:57:11 homemp3 kernel: ata5: EH complete
>
>
> I suppose the hadam3p_um_6.14 command is part of my BOINC installation,
> doing a climate simulation. However, the problem has also occurred with
> this program not running.
>
> Here's the output of scripts/ver_linux:
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux homemp3 2.6.32.7 #1 Sat Feb 6 10:50:05 CET 2010 i686 GNU/Linux
>
> Gnu C 4.3.2
> Gnu make 3.81
> binutils 2.18.0.20080103
> util-linux 2.13.1.1
> mount 2.13.1.1
> module-init-tools found
> Linux C Library 2.7
> Dynamic linker (ldd) 2.7
> Procps 3.2.7
> Console-tools 0.2.3
> Sh-utils 6.10
> udev 125
> Modules Loaded ipv6 bsd_comp usb_storage ppp_deflate
> zlib_deflate ppp_ge
> neric slhc w83627hf hwmon_vid hwmon i2c_dev saa7134_alsa
> snd_hda_codec_realtek tuner_simple tuner_types mt352 snd_hda_intel
> saa7134_dvb snd_hda_codec videobuf_dvb snd_pcm_oss snd_mixer_oss
> dvb_core snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event
> 8250_pnp snd_seq 8250 serial_core snd_timer snd_seq_device
> saa7134 ehci_hcd ir_common snd v4l2_common videodev v4l1_compat
> soundcore snd_page_alloc videobuf_dma_sg videobuf_core tveeprom usbcore
> via_rhine i2c_core e1000
>
>
> As a result of the exception, the system becomes very unresponsive. Any
> sort of I/O seems to have very poor response time. Ping times in the
> gigabit network suddenly take several tens of milliseconds. It seems
> this may have to do with the IRQ10 being somehow affected, but I'm not
> sure.
>
> /proc/version:
>
> Linux version 2.6.32.7 (root@homemp3) (gcc version 4.3.2 (Debian
> 4.3.2-1.1) ) #1 Sat Feb 6 10:50:05 CET 2010
>
> /proc/cpuinfo:
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Celeron(R) CPU 2.80GHz
> stepping : 9
> cpu MHz : 2799.930
> cache size : 256 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
> constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr lahf_lm
> bogomips : 5623.13
> clflush size : 64
> cache_alignment : 128
> address sizes : 36 bits physical, 48 bits virtual
> power management:
>
>
> Output of lcpsi -vvv:
>
> 00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge
> Subsystem: ASRock Incorporation Device 0308
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort+ >SERR- <PERR+ INTx-
> Latency: 8, Cache Line Size: 32 bytes
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [80] AGP version 3.5
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64
> bit- FW- AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<n
> one>
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: agpgart-via
>
> 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
> Subsystem: ASRock Incorporation Device 1308
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
> Subsystem: ASRock Incorporation Device 2308
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
> Subsystem: ASRock Incorporation Device 4308
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller
> (prog-if
> 20 [IO(X)-APIC])
> Subsystem: ASRock Incorporation Device 5308
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
> (prog-if 00 [
> Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fc700000-fe7fffff
> Prefetchable memory behind bridge: cff00000-dfefffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge
> Controller (p
> rog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00001000-00001fff
> Memory behind bridge: fe800000-fe8fffff
> Prefetchable memory behind bridge: 40000000-401fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <64ns, L1
> unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupporte
> d-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPe
> nd-
> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1,
> Latency L
> 0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk-
> DLActive
> - BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug+ Surpise
> +
> Slot # 10, PowerLimit 75.000000; Interlock-
> NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- L
> inkChg-
> Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlo
> ck-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet- Interl
> ock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSV
> isible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot
> +,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+
> Queue=0/0
> Enable-
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Virtual Channel <?>
>
> 00:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet
> Controll
> er (rev 05)
> Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (63750ns min), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at feba0000 (32-bit, non-prefetchable)
> [size=128K] Region 1: Memory at feb80000 (32-bit, non-prefetchable)
> [size=128K] Region 2: I/O ports at cc00 [size=64]
> Expansion ROM at feb60000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot
> +,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [e4] PCI-X non-bridge device
> Command: DPERE- ERO+ RBC=512 OST=1
> Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
> DMMRBC=20
> 48 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
> Kernel driver in use: e1000
> Kernel modules: e1000
>
> 00:0a.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
> 300 TX4
> ) (rev 02)
> Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at d400 [size=128]
> Region 2: I/O ports at c800 [size=256]
> Region 3: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
> Region 4: Memory at febc0000 (32-bit, non-prefetchable)
> [size=128K] Expansion ROM at febe0000 [disabled] [size=32K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: sata_promise
>
> 00:0c.0 Multimedia controller: Philips Semiconductors
> SAA7131/SAA7133/SAA7135 Vi
> deo Broadcast Decoder (rev d1)
> Subsystem: Avermedia Technologies Inc Device 2c05
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: saa7134
> Kernel modules: saa7134
>
> 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port
> Controller (re
> v 80) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: ASRock Incorporation Device 0591
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin B routed to IRQ 10
> Region 0: I/O ports at e000 [size=8]
> Region 1: I/O ports at dc00 [size=4]
> Region 2: I/O ports at d880 [size=8]
> Region 3: I/O ports at d800 [size=4]
> Region 4: I/O ports at d480 [size=16]
> Region 5: I/O ports at d000 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: sata_via
>
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/
> C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP])
> Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Region 0: [virtual] Memory at 000001f0 (32-bit,
> non-prefetchable) [disab
> led] [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3,
> non-prefetchable) [disab
> led] [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit,
> non-prefetchable) [disab
> led] [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3,
> non-prefetchable) [disab
> led] [size=1]
> Region 4: I/O ports at fc00 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: VIA_IDE
>
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller
> (rev a0) (prog-if 00 [UHCI])
> Subsystem: ASRock Incorporation K7VT6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 4: I/O ports at e080 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3h
> ot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller
> (rev a0) (prog-if 00 [UHCI])
> Subsystem: ASRock Incorporation K7VT6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 10
> Region 4: I/O ports at e400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3h
> ot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller
> (rev a0) (prog-if 00 [UHCI])
> Subsystem: ASRock Incorporation K7VT6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 10
> Region 4: I/O ports at e480 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3h
> ot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller
> (rev a0) (prog-if 00 [UHCI])
> Subsystem: ASRock Incorporation K7VT6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin D routed to IRQ 10
> Region 4: I/O ports at ec00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3h
> ot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
> 20 [EHC
> I])
> Subsystem: ASRock Incorporation K7VT6 motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 128 bytes
> Interrupt: pin C routed to IRQ 10
> Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3h
> ot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
> Subsystem: ASRock Incorporation Device 3337
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
> Subsystem: VIA Technologies, Inc. Device 337e
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort+ >SERR- <PERR+ INTx-
> Latency: 32
> Capabilities: [58] HyperTransport: Interrupt Discovery and
> Configuration
>
>
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
> (rev 7c)
> Subsystem: ASRock Incorporation K7VT6 motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at e800 [size=256]
> Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot
> +,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: via-rhine
> Kernel modules: via-rhine
>
> 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2
> MX200] (
> rev b2) (prog-if 00 [VGA controller])
> Subsystem: ABIT Computer Corp. Device 6107
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort
>
> - <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
> Expansion ROM at fe7f0000 [disabled] [size=64K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot
> -,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
> HTrans- 64
> bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<n
> one>
> Kernel modules: nvidiafb
>
> 80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA
> High De
> finition Audio Controller) (rev 10)
> Subsystem: ASRock Incorporation Device 0888
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Step
> ping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3ho
> t+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v1) Root Complex Integrated
> Endpoint, MSI 00
>
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1
> <1us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupporte
> d-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPe
> nd+
> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
> Latency
> L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
> DLActive
> - BWMgmt- ABWMgmt-
> Capabilities: [100] #1106
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
>
> /proc/ioports:
>
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-0060 : keyboard
> 0064-0064 : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:0f.1
> 0170-0177 : via82cxxx
> 01f0-01f7 : 0000:00:0f.1
> 01f0-01f7 : via82cxxx
> 0295-0296 : w83627hf
> 0295-0296 : pnp 00:09
> 0295-0296 : w83627hf
> 02f8-02ff : serial
> 0376-0376 : 0000:00:0f.1
> 0376-0376 : via82cxxx
> 03c0-03df : vga+
> 03e0-03e7 : pnp 00:09
> 03f2-03f2 : floppy
> 03f4-03f5 : floppy
> 03f6-03f6 : 0000:00:0f.1
> 03f6-03f6 : via82cxxx
> 03f7-03f7 : floppy
> 03f8-03ff : serial
> 0400-041f : pnp 00:09
> 04d0-04d1 : pnp 00:09
> 0800-087f : pnp 00:09
> 0800-0803 : ACPI PM1a_EVT_BLK
> 0804-0805 : ACPI PM1a_CNT_BLK
> 0808-080b : ACPI PM_TMR
> 0810-0815 : ACPI CPU throttle
> 0820-0823 : ACPI GPE0_BLK
> 0cf8-0cff : PCI conf1
> 1000-1fff : PCI Bus 0000:02
> c800-c8ff : 0000:00:0a.0
> cc00-cc3f : 0000:00:09.0
> cc00-cc3f : e1000
> d000-d0ff : 0000:00:0f.0
> d000-d0ff : sata_via
> d400-d47f : 0000:00:0a.0
> d480-d48f : 0000:00:0f.0
> d480-d48f : sata_via
> d800-d803 : 0000:00:0f.0
> d800-d803 : sata_via
> d880-d887 : 0000:00:0f.0
> d880-d887 : sata_via
> dc00-dc03 : 0000:00:0f.0
> dc00-dc03 : sata_via
> e000-e007 : 0000:00:0f.0
> e000-e007 : sata_via
> e080-e09f : 0000:00:10.0
> e400-e41f : 0000:00:10.1
> e480-e49f : 0000:00:10.2
> e800-e8ff : 0000:00:12.0
> e800-e8ff : via-rhine
> ec00-ec1f : 0000:00:10.3
> fc00-fc0f : 0000:00:0f.1
> fc00-fc0f : via82cxxx
>
> /proc/iomem:
>
> 00000000-0000ffff : reserved
> 00010000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000cc7ff : Video ROM
> 000cc800-000d17ff : Adapter ROM
> 000d1800-000d27ff : Adapter ROM
> 000e6000-000fffff : reserved
> 000f0000-000fffff : System ROM
> 00100000-3ffaffff : System RAM
> 01000000-0128c677 : Kernel code
> 0128c678-0138f533 : Kernel data
> 013e0000-014131ff : Kernel bss
> 3ffb0000-3ffbffff : ACPI Tables
> 3ffc0000-3ffeffff : ACPI Non-volatile Storage
> 3fff0000-3fffffff : reserved
> 40000000-401fffff : PCI Bus 0000:02
> cff00000-dfefffff : PCI Bus 0000:01
> d0000000-d7ffffff : 0000:01:00.0
> e0000000-efffffff : PCI MMCONFIG 0 [00-ff]
> e0000000-efffffff : pnp 00:0e
> f8000000-fbffffff : 0000:00:00.0
> fc700000-fe7fffff : PCI Bus 0000:01
> fd000000-fdffffff : 0000:01:00.0
> fe7f0000-fe7fffff : 0000:01:00.0
> fe800000-fe8fffff : PCI Bus 0000:02
> fe9fc000-fe9fffff : 0000:80:01.0
> fe9fc000-fe9fffff : pnp 00:09
> fe9fc000-fe9fffff : ICH HD audio
> feb60000-feb7ffff : 0000:00:09.0
> feb80000-feb9ffff : 0000:00:09.0
> feb80000-feb9ffff : e1000
> feba0000-febbffff : 0000:00:09.0
> feba0000-febbffff : e1000
> febc0000-febdffff : 0000:00:0a.0
> febe0000-febe7fff : 0000:00:0a.0
> febfe000-febfefff : 0000:00:0a.0
> febfe000-febfefff : sata_promise
> febff000-febff7ff : 0000:00:0c.0
> febff000-febff7ff : saa7133[0]
> febff800-febff8ff : 0000:00:10.4
> febff800-febff8ff : ehci_hcd
> febffc00-febffcff : 0000:00:12.0
> febffc00-febffcff : via-rhine
> fec00000-fec00fff : pnp 00:0a
> fee00000-fee00fff : reserved
> fee00000-fee00fff : pnp 00:0a
> ff780000-ffffffff : reserved
> ffb80000-ffbfffff : pnp 00:09
> fff80000-ffffffff : pnp 00:0f
>
> /proc/scsi/scsi:
>
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: ST31500341AS Rev: CC1H
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi4 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: ST3500630AS Rev: 3.AA
> Type: Direct-Access ANSI SCSI revision: 05
>
>
>
> Thanks for any hints and best regards,
> -- Axel
>
--
Maciej Rutecki
http://www.maciek.unixy.pl
next prev parent reply other threads:[~2010-02-11 20:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-10 11:10 Kernel Bug in ATA or SMART area Axel Uhl
2010-02-11 20:21 ` Maciej Rutecki [this message]
2010-02-11 22:18 ` Axel Uhl
2010-02-12 2:32 ` Tejun Heo
[not found] ` <4B74F263.1060709@gmx.de>
[not found] ` <4B7505CA.60409@kernel.org>
2010-02-12 8:46 ` Axel Uhl
2010-02-17 2:29 ` Tejun Heo
2010-02-17 20:50 ` Axel Uhl
2010-02-18 10:50 ` Mikael Pettersson
2010-02-19 18:53 ` Axel Uhl
2010-02-19 21:03 ` Mikael Pettersson
2010-02-20 8:46 ` Axel Uhl
2010-02-20 12:10 ` Mikael Pettersson
2010-02-20 22:50 ` Axel Uhl
2010-02-20 3:50 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201002112121.22399.maciej.rutecki@gmail.com \
--to=maciej.rutecki@gmail.com \
--cc=axel.uhl@gmx.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.