From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Fri, 12 Feb 2010 08:42:29 +0000 Subject: Re: [lm-sensors] LPC47M192-NC Fans Message-Id: <20100212094229.3a80df9b@hyperion.delvare> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Sean, Please keep the list in the loop. On Thu, 11 Feb 2010 19:25:49 -0500, Sean Fidler wrote: > The driver unloaded and loaded again without issue. > /proc/ioports output: > (...) > 0600-067f : smsc47m1 > 0604-0604 : smsc47m1 > 0633-0636 : smsc47m1 > 0656-065c : smsc47m1 OK, looks very good. > I have a question regarding sensors.conf, I updated the file with the text > from the configuration you posted, however, when I run sensors I see the > same information as before (i.e. sensors.conf not being used). If I run > sensors -c /etc/sensors.conf then the output is as expected. Just wanted to > confirm that this is correct functionality. Maybe you have /etc/sensors3.conf too? It takes precedence over /etc/sensors.conf for lm-sensors 3.x. If you are using lm-sensors 3.x then you want to edit /etc/sensors3.conf, not /etc/sensors.conf. -- Jean Delvare http://khali.linux-fr.org/wishlist.html _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors