All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Neil Horman <nhorman@tuxdriver.com>
Cc: akpm@linux-foundation.org, andi@firstfloor.org,
	jirislaby@gmail.com, linux-kernel@vger.kernel.org,
	gregkh@suse.de, kay.sievers@suse.de
Subject: Re: [PATCH] Fix up a few missed minor rcu errors in uevent_helper
Date: Tue, 16 Feb 2010 10:11:01 -0800	[thread overview]
Message-ID: <20100216181101.GD6797@linux.vnet.ibm.com> (raw)
In-Reply-To: <20100216155243.GA6155@hmsreliant.think-freely.org>

On Tue, Feb 16, 2010 at 10:52:43AM -0500, Neil Horman wrote:
> Fix up a few remaining nits in uevent_helper
> 
> Fixes the remaining missed lock points in uevent_helper, as reported by Paul
> McKenney in his review.  Specifically adds a spin lock to guard the write side
> of usevent_helper from concurrent writes, and fixes two remaining missed read
> side points that failed to use rcu_read_lock properly.  Also fixe up a minor
> string parsing issue in uvent_helper_set (was terminating the string on the
> wrong buffer).
> 
> I've done minimal testing on this (as the things this fixes were reported by
> code audit, not any actual oops or other failure).  I did run this for a few
> hours though, with several processes reading/writing different values to
> /sys/kernel/uevent_helper, while issued a few module loads that required issuing
> udev events (which, when overlapping with a proper write to /sys/kernel/uevent),
> triggered a fork in the appropriate binary.  Nothing has fallen over in that
> time, so I'm satisfied with this.  Applies as an incremental on top of the
> latest -mm
> Neil

>From and RCU perspective:

Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

> Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
> Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
> Tested-by: Neil Horman <nhorman@tuxdriver.com>
> 
> 
>  kernel/ksysfs.c      |   17 ++++++++++++-----
>  lib/kobject_uevent.c |    3 ++-
>  2 files changed, 14 insertions(+), 6 deletions(-)
> 
> diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
> index 66d1e5b..401d1f0 100644
> --- a/kernel/ksysfs.c
> +++ b/kernel/ksysfs.c
> @@ -16,6 +16,7 @@
>  #include <linux/kexec.h>
>  #include <linux/profile.h>
>  #include <linux/sched.h>
> +#include <linux/spinlock.h>
> 
>  #define KERNEL_ATTR_RO(_name) \
>  static struct kobj_attribute _name##_attr = __ATTR_RO(_name)
> @@ -37,13 +38,18 @@ KERNEL_ATTR_RO(uevent_seqnum);
>  static ssize_t uevent_helper_show(struct kobject *kobj,
>  				  struct kobj_attribute *attr, char *buf)
>  {
> -	return sprintf(buf, "%s\n", rcu_dereference(uevent_helper));
> +	ssize_t count;
> +	rcu_read_lock();
> +	count = sprintf(buf, "%s\n", rcu_dereference(uevent_helper));
> +	rcu_read_unlock();
> +	return count;
>  }
> 
>  struct uevent_helper_rcu {
>  	char *oldptr;
>  	struct rcu_head rcu;
>  };
> +static DEFINE_SPINLOCK(uevent_helper_lock);
> 
>  static void free_old_uevent_ptr(struct rcu_head *list)
>  {
> @@ -68,15 +74,16 @@ static ssize_t uevent_helper_store(struct kobject *kobj,
>  	kbuf = kstrndup(buf, UEVENT_HELPER_PATH_LEN, GFP_KERNEL);
>  	if (!kbuf)
>  		return -ENOMEM;
> -	uevent_helper[count] = '\0';
> -	if (count && uevent_helper[count-1] == '\n')
> -		uevent_helper[count-1] = '\0';
> +	kbuf[count] = '\0';
> +	if (count && kbuf[count-1] == '\n')
> +		kbuf[count-1] = '\0';
>  	old = kmalloc(sizeof(struct uevent_helper_rcu), GFP_KERNEL);
>  	if (!old)
>  		goto out_free;
> -
> +	spin_lock(&uevent_helper_lock);
>  	old->oldptr = rcu_dereference(uevent_helper);
>  	rcu_assign_pointer(uevent_helper, kbuf);
> +	spin_unlock(&uevent_helper_lock);
>  	call_rcu(&old->rcu, free_old_uevent_ptr);
> 
>  	return count;
> diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
> index 211f846..a7520d0 100644
> --- a/lib/kobject_uevent.c
> +++ b/lib/kobject_uevent.c
> @@ -273,10 +273,11 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
>  #endif
> 
>  	/* call uevent_helper, usually only enabled during early boot */
> +	rcu_read_lock();
>  	helper = rcu_dereference(uevent_helper);
>  	if (helper[0])
>  		retval = uevent_call_helper(subsystem, env);
> -
> +	rcu_read_unlock();
>  exit:
>  	kfree(devpath);
>  	kfree(env);

      reply	other threads:[~2010-02-16 18:11 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-16 15:52 [PATCH] Fix up a few missed minor rcu errors in uevent_helper Neil Horman
2010-02-16 18:11 ` Paul E. McKenney [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100216181101.GD6797@linux.vnet.ibm.com \
    --to=paulmck@linux.vnet.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=andi@firstfloor.org \
    --cc=gregkh@suse.de \
    --cc=jirislaby@gmail.com \
    --cc=kay.sievers@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nhorman@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.