[PATCH 2/3] pata_oldpiix: add locking for parallel scanning

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_oldpiix: add locking for parallel scanning

Add an extra locking for parallel scanning.

This is similar change as commit 60c3be3 for ata_piix host driver
and while pata_oldpiix doesn't enable parallel scan yet the race
could probably also be triggered by requesting re-scanning of both
ports at the same time using SCSI sysfs interface.

Fix documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ata/pata_oldpiix.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Index: b/drivers/ata/pata_oldpiix.c
===================================================================
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -1,7 +1,8 @@
 /*
- *    pata_oldpiix.c - Intel PATA/SATA controllers
+ *    pata_oldpiix.c - older Intel PATA controllers
  *
  *	(C) 2005 Red Hat
+ *	(C) 2010 Bartlomiej Zolnierkiewicz
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
@@ -50,10 +51,13 @@ static int oldpiix_pre_reset(struct ata_
 	return ata_sff_prereset(link, deadline);
 }
 
+static DEFINE_SPINLOCK(piix_lock);
+
 static void oldpiix_set_timings(struct ata_port *ap, struct ata_device *adev,
 				u8 pio, bool use_mwdma)
 {
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned long flags;
 	unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
 	u16 idetm_data;
 	int control = 0;
@@ -84,6 +88,8 @@ static void oldpiix_set_timings(struct a
 		/* Enable DMA timing only */
 		control |= 8;	/* PIO cycles in PIO0 */
 
+	spin_lock_irqsave(&piix_lock, flags);
+
 	pci_read_config_word(dev, idetm_port, &idetm_data);
 
 	/*
@@ -101,6 +107,8 @@ static void oldpiix_set_timings(struct a
 			(timings[pio][1] << 8);
 	pci_write_config_word(dev, idetm_port, idetm_data);
 
+	spin_unlock_irqrestore(&piix_lock, flags);
+
 	/* Track which port is configured */
 	ap->private_data = adev;
 }