[PATCH 1/1] add mx3 cupid bsp

[daniel@caiaq.de (Daniel Mack)]

On Thu, Feb 18, 2010 at 04:12:33PM +0100, Carsten Behling wrote:
> Hi,
> 
> I added board support for CUPID.
> 
> Carsten
> 
> Signed-off-by: Carsten Behling <carsten.behling@garz-fricke.com>

Now the commit log is messed up again ...

Daniel



> ---
>  arch/arm/mach-mx3/Kconfig                   |    7 +
>  arch/arm/mach-mx3/Makefile                  |    1 +
>  arch/arm/mach-mx3/mach-guf_cupid.c          |  181 +++++++++++++++++++++++++++
>  arch/arm/plat-mxc/include/mach/uncompress.h |    1 +
>  4 files changed, 190 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-mx3/mach-guf_cupid.c
> 
> diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
> index 3872af1..a7e40d7 100644
> --- a/arch/arm/mach-mx3/Kconfig
> +++ b/arch/arm/mach-mx3/Kconfig
> @@ -114,4 +114,11 @@ config MACH_KZM_ARM11_01
>           Include support for KZM-ARM11-01. This includes specific
>           configurations for the board and its peripherals.
> 
> +config MACH_GUF_CUPID
> +       bool "Support Garz & Fricke Cupid platform"
> +       select ARCH_MX35
> +       help
> +         Include support for Cupid platform. This includes specific
> +         configurations for the board and its peripherals.
> +
>  endif
> diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
> index 5d650fd..7f9ca81 100644
> --- a/arch/arm/mach-mx3/Makefile
> +++ b/arch/arm/mach-mx3/Makefile
> @@ -24,3 +24,4 @@ obj-$(CONFIG_MACH_PCM043)     += mach-pcm043.o
>  obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
>  obj-$(CONFIG_MACH_MX35_3DS)    += mach-mx35pdk.o
>  obj-$(CONFIG_MACH_KZM_ARM11_01)        += mach-kzm_arm11_01.o
> +obj-$(CONFIG_MACH_GUF_CUPID)   += mach-guf_cupid.o
> diff --git a/arch/arm/mach-mx3/mach-guf_cupid.c b/arch/arm/mach-mx3/mach-guf_cupid.c
> new file mode 100644
> index 0000000..d12ac97
> --- /dev/null
> +++ b/arch/arm/mach-mx3/mach-guf_cupid.c
> @@ -0,0 +1,181 @@
> +/*
> + * Copyright 2010 Garz & Fricke GmbH All Rights Reserved.
> + *
> + * Author: Carsten Behling <carsten.behling@garz-fricke.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA
> + */
> +
> +#include <linux/types.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/mtd/physmap.h>
> +#include <linux/memory.h>
> +#include <linux/interrupt.h>
> +
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +#include <asm/mach/map.h>
> +
> +#include <mach/hardware.h>
> +#include <mach/common.h>
> +#include <mach/imx-uart.h>
> +#include <mach/iomux-mx35.h>
> +#include <mach/ipu.h>
> +#include <mach/mx3fb.h>
> +#include <mach/mxc_nand.h>
> +
> +#include "devices.h"
> +
> +static struct fb_videomode fb_modedb[] = {
> +       {
> +               /* 800x480 @ 70 Hz */
> +               .name           = "CPT CLAA070LC0JCT",
> +               .refresh        = 70,
> +               .xres           = 800,
> +               .yres           = 480,
> +               .pixclock       = 7829,
> +               .left_margin    = 24,
> +               .right_margin   = 47,
> +               .upper_margin   = 5,
> +               .lower_margin   = 3,
> +               .hsync_len      = 24,
> +               .vsync_len      = 3,
> +               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
> +                                 FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
> +               .vmode          = FB_VMODE_NONINTERLACED,
> +               .flag           = 0,
> +       },
> +};
> +
> +static struct ipu_platform_data mx3_ipu_data = {
> +       .irq_base = MXC_IPU_IRQ_START,
> +};
> +
> +static struct mx3fb_platform_data mx3fb_pdata = {
> +       .dma_dev        = &mx3_ipu.dev,
> +       .name           = "CPT CLAA070LC0JCT",
> +       .mode           = fb_modedb,
> +       .num_modes      = ARRAY_SIZE(fb_modedb),
> +};
> +
> +static struct imxuart_platform_data uart_pdata = {
> +       .flags = IMXUART_HAVE_RTSCTS,
> +};
> +
> +static struct platform_device *devices[] __initdata = {
> +       &mxc_fec_device,
> +};
> +
> +static struct pad_desc cupid_pads[] = {
> +       /* UART1 */
> +       MX35_PAD_CTS1__UART1_CTS,
> +       MX35_PAD_RTS1__UART1_RTS,
> +       MX35_PAD_TXD1__UART1_TXD_MUX,
> +       MX35_PAD_RXD1__UART1_RXD_MUX,
> +       /* UART2 */
> +       MX35_PAD_CTS2__UART2_CTS,
> +       MX35_PAD_RTS2__UART2_RTS,
> +       MX35_PAD_TXD2__UART2_TXD_MUX,
> +       MX35_PAD_RXD2__UART2_RXD_MUX,
> +       /* FEC */
> +       MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
> +       MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
> +       MX35_PAD_FEC_RX_DV__FEC_RX_DV,
> +       MX35_PAD_FEC_COL__FEC_COL,
> +       MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
> +       MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
> +       MX35_PAD_FEC_TX_EN__FEC_TX_EN,
> +       MX35_PAD_FEC_MDC__FEC_MDC,
> +       MX35_PAD_FEC_MDIO__FEC_MDIO,
> +       MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
> +       MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
> +       MX35_PAD_FEC_CRS__FEC_CRS,
> +       MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
> +       MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
> +       MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
> +       MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
> +       MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
> +       MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
> +       /* Display */
> +       MX35_PAD_LD0__IPU_DISPB_DAT_0,
> +       MX35_PAD_LD1__IPU_DISPB_DAT_1,
> +       MX35_PAD_LD2__IPU_DISPB_DAT_2,
> +       MX35_PAD_LD3__IPU_DISPB_DAT_3,
> +       MX35_PAD_LD4__IPU_DISPB_DAT_4,
> +       MX35_PAD_LD5__IPU_DISPB_DAT_5,
> +       MX35_PAD_LD6__IPU_DISPB_DAT_6,
> +       MX35_PAD_LD7__IPU_DISPB_DAT_7,
> +       MX35_PAD_LD8__IPU_DISPB_DAT_8,
> +       MX35_PAD_LD9__IPU_DISPB_DAT_9,
> +       MX35_PAD_LD10__IPU_DISPB_DAT_10,
> +       MX35_PAD_LD11__IPU_DISPB_DAT_11,
> +       MX35_PAD_LD12__IPU_DISPB_DAT_12,
> +       MX35_PAD_LD13__IPU_DISPB_DAT_13,
> +       MX35_PAD_LD14__IPU_DISPB_DAT_14,
> +       MX35_PAD_LD15__IPU_DISPB_DAT_15,
> +       MX35_PAD_LD16__IPU_DISPB_DAT_16,
> +       MX35_PAD_LD17__IPU_DISPB_DAT_17,
> +       MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
> +       MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
> +       MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
> +       MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
> +       MX35_PAD_LD18__GPIO3_24,                /* LCD enable */
> +       MX35_PAD_CSPI1_SS1__PWM_PWMO,           /* LCD backligtht PWM */
> +};
> +
> +static struct mxc_nand_platform_data nand_pdata = {
> +       .width = 1,
> +       .hw_ecc = 1,
> +       .flash_bbt = 0,
> +};
> +
> +/*
> + * Board specific initialization.
> + */
> +static void __init mxc_board_init(void)
> +{
> +       mxc_iomux_v3_setup_multiple_pads(cupid_pads, ARRAY_SIZE(cupid_pads));
> +
> +       platform_add_devices(devices, ARRAY_SIZE(devices));
> +
> +       mxc_register_device(&mxc_uart_device0, &uart_pdata);
> +       mxc_register_device(&mxc_nand_device, &nand_pdata);
> +
> +       mxc_register_device(&mx3_ipu, &mx3_ipu_data);
> +       mxc_register_device(&mx3_fb, &mx3fb_pdata);
> +}
> +
> +static void __init cupid_timer_init(void)
> +{
> +       mx35_clocks_init();
> +}
> +
> +struct sys_timer cupid_timer = {
> +       .init   = cupid_timer_init,
> +};
> +
> +MACHINE_START(GUF_CUPID, "Garz & Fricke CUPID")
> +       /* Maintainer: Garz & Fricke GmbH */
> +       .phys_io        = MX35_AIPS1_BASE_ADDR,
> +       .io_pg_offst    = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
> +       .boot_params    = MX3x_PHYS_OFFSET + 0x100,
> +       .map_io         = mx35_map_io,
> +       .init_irq       = mx35_init_irq,
> +       .init_machine   = mxc_board_init,
> +       .timer          = &cupid_timer,
> +MACHINE_END
> +
> diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
> index d189f00..1a0b311 100644
> --- a/arch/arm/plat-mxc/include/mach/uncompress.h
> +++ b/arch/arm/plat-mxc/include/mach/uncompress.h
> @@ -94,6 +94,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
>         case MACH_TYPE_MX35_3DS:
>         case MACH_TYPE_PCM043:
>         case MACH_TYPE_LILLY1131:
> +       case MACH_TYPE_GUF_CUPID:
>                 uart_base = MX3X_UART1_BASE_ADDR;
>                 break;
>         case MACH_TYPE_MAGX_ZN5:
> --
> 1.6.0.2
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel