From: Jiri Pirko <jpirko@redhat.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net
Subject: [net-next-2.6 PATCH] ixgbe: convert to use netdev_for_each_mc_addr
Date: Tue, 23 Feb 2010 20:05:05 +0100 [thread overview]
Message-ID: <20100223190505.GA2673@psychotron.redhat.com> (raw)
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
---
drivers/net/ixgbe/ixgbe_common.c | 16 +++++++---------
drivers/net/ixgbe/ixgbe_common.h | 5 ++---
drivers/net/ixgbe/ixgbe_main.c | 24 ++----------------------
drivers/net/ixgbe/ixgbe_type.h | 3 +--
4 files changed, 12 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index eb49020..4d1c3a4 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1484,26 +1484,24 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
/**
* ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
* @hw: pointer to hardware structure
- * @mc_addr_list: the list of new multicast addresses
- * @mc_addr_count: number of addresses
- * @next: iterator function to walk the multicast address list
+ * @netdev: pointer to net device structure
*
* The given list replaces any existing list. Clears the MC addrs from receive
* address registers and the multicast table. Uses unused receive address
* registers for the first multicast addresses, and hashes the rest into the
* multicast table.
**/
-s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count, ixgbe_mc_addr_itr next)
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
+ struct net_device *netdev)
{
+ struct dev_addr_list *dmi;
u32 i;
- u32 vmdq;
/*
* Set the new number of MC addresses that we are being requested to
* use.
*/
- hw->addr_ctrl.num_mc_addrs = mc_addr_count;
+ hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev);
hw->addr_ctrl.mta_in_use = 0;
/* Clear the MTA */
@@ -1512,9 +1510,9 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
/* Add the new addresses */
- for (i = 0; i < mc_addr_count; i++) {
+ netdev_for_each_mc_addr(dmi, netdev) {
hw_dbg(hw, " Adding the multicast addresses:\n");
- ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
+ ixgbe_set_mta(hw, dmi->dmi_addr);
}
/* Enable mta */
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 13606d4..264eef5 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -56,9 +56,8 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
-s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count,
- ixgbe_mc_addr_itr func);
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
+ struct net_device *netdev);
s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
struct net_device *netdev);
s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 3308790..5ef4f6a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2513,21 +2513,6 @@ static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
}
}
-static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq)
-{
- struct dev_mc_list *mc_ptr;
- u8 *addr = *mc_addr_ptr;
- *vmdq = 0;
-
- mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]);
- if (mc_ptr->next)
- *mc_addr_ptr = mc_ptr->next->dmi_addr;
- else
- *mc_addr_ptr = NULL;
-
- return addr;
-}
-
/**
* ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
@@ -2542,8 +2527,6 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
u32 fctrl, vlnctrl;
- u8 *addr_list = NULL;
- int addr_count = 0;
/* Check for Promiscuous and All Multicast modes */
@@ -2572,11 +2555,8 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
hw->mac.ops.update_uc_addr_list(hw, netdev);
/* reprogram multicast list */
- addr_count = netdev_mc_count(netdev);
- if (addr_count)
- addr_list = netdev->mc_list->dmi_addr;
- hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
- ixgbe_addr_list_itr);
+ hw->mac.ops.update_mc_addr_list(hw, netdev);
+
if (adapter->num_vfs)
ixgbe_restore_vf_multicasts(adapter);
}
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 2be9074..c67b98e 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2415,8 +2415,7 @@ struct ixgbe_mac_operations {
s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
s32 (*init_rx_addrs)(struct ixgbe_hw *);
s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct net_device *);
- s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
- ixgbe_mc_addr_itr);
+ s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
s32 (*enable_mc)(struct ixgbe_hw *);
s32 (*disable_mc)(struct ixgbe_hw *);
s32 (*clear_vfta)(struct ixgbe_hw *);
--
1.6.6
next reply other threads:[~2010-02-23 19:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-23 19:05 Jiri Pirko [this message]
2010-02-24 9:30 ` [net-next-2.6 PATCH] ixgbe: convert to use netdev_for_each_mc_addr Jeff Kirsher
2010-03-11 10:08 ` Jiri Pirko
2010-03-11 18:18 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100223190505.GA2673@psychotron.redhat.com \
--to=jpirko@redhat.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.