From: Matthias Kaehlcke <matthias@kaehlcke.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2 rev2] ep93xx: Refactoring of timer code
Date: Wed, 24 Feb 2010 00:22:09 +0100 [thread overview]
Message-ID: <20100223232209.GR20201@darwin> (raw)
In-Reply-To: <7ee75976e78e2f82b4163fe1ff4233a850d4393c.1266966938.git.matthias@kaehlcke.net>
ep93xx: Refactoring of the timer code, including the following changes
* use a free running timer instead of a periodical one
* use unsigned long long for total number of ticks
* hold the timer state in a structure instead of separate variables
* increment the timer counter instead of decrementing it
* remove unused function udelay_masked()
* remove unused function set_timer()
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
---
Changes with regard to rev1:
* use TIMER_FREQ directly instead of recalculating it with rounding errors
cpu/arm920t/ep93xx/timer.c | 70 ++++++++++++++++---------------------------
1 files changed, 26 insertions(+), 44 deletions(-)
diff --git a/cpu/arm920t/ep93xx/timer.c b/cpu/arm920t/ep93xx/timer.c
index 98c759c..b1a01a0 100644
--- a/cpu/arm920t/ep93xx/timer.c
+++ b/cpu/arm920t/ep93xx/timer.c
@@ -34,16 +34,18 @@
#include <div64.h>
#define TIMER_CLKSEL (1 << 3)
-#define TIMER_MODE (1 << 6)
#define TIMER_ENABLE (1 << 7)
-#define TIMER_FREQ 508469
-#define TIMER_LOAD_VAL (TIMER_FREQ / CONFIG_SYS_HZ)
+#define TIMER_FREQ 508469
+#define TIMER_MAX_VAL 0xFFFFFFFF
-static ulong timestamp;
-static ulong lastdec;
+static struct ep93xx_timer
+{
+ unsigned long long ticks;
+ unsigned long last_update;
+} timer;
-static inline unsigned long clk_to_systicks(unsigned long clk_ticks)
+static inline unsigned long clk_to_systicks(unsigned long long clk_ticks)
{
unsigned long long sys_ticks = (clk_ticks * CONFIG_SYS_HZ);
do_div(sys_ticks, TIMER_FREQ);
@@ -57,10 +59,10 @@ static inline unsigned long usecs_to_ticks(unsigned long usecs)
if (usecs >= 1000) {
ticks = usecs / 1000;
- ticks *= (TIMER_LOAD_VAL * CONFIG_SYS_HZ);
+ ticks *= TIMER_FREQ;
ticks /= 1000;
} else {
- ticks = usecs * TIMER_LOAD_VAL * CONFIG_SYS_HZ;
+ ticks = usecs * TIMER_FREQ;
ticks /= (1000 * 1000);
}
@@ -71,7 +73,7 @@ static inline unsigned long read_timer(void)
{
struct timer_regs *timer = (struct timer_regs *)TIMER_BASE;
- return readl(&timer->timer3.value);
+ return TIMER_MAX_VAL - readl(&timer->timer3.value);
}
/*
@@ -81,17 +83,15 @@ unsigned long long get_ticks(void)
{
const unsigned long now = read_timer();
- if (lastdec >= now) {
- /* normal mode */
- timestamp += lastdec - now;
- } else {
- /* we have an overflow ... */
- timestamp += lastdec + TIMER_LOAD_VAL - now;
- }
+ if (now >= timer.last_update)
+ timer.ticks += now - timer.last_update;
+ else
+ /* an overflow occurred */
+ timer.ticks += TIMER_MAX_VAL - timer.last_update + now;
- lastdec = now;
+ timer.last_update = now;
- return timestamp;
+ return timer.ticks;
}
unsigned long get_timer_masked(void)
@@ -106,8 +106,8 @@ unsigned long get_timer(unsigned long base)
void reset_timer_masked(void)
{
- lastdec = read_timer();
- timestamp = 0;
+ timer.last_update = read_timer();
+ timer.ticks = 0;
}
void reset_timer(void)
@@ -115,28 +115,11 @@ void reset_timer(void)
reset_timer_masked();
}
-void set_timer(unsigned long t)
-{
- timestamp = t;
-}
-
void __udelay(unsigned long usec)
{
- const unsigned long ticks = usecs_to_ticks(usec);
- const unsigned long target = clk_to_systicks(ticks) + get_timer(0);
-
- while (get_timer_masked() < target)
- /* noop */;
-}
-
-void udelay_masked(unsigned long usec)
-{
- const unsigned long ticks = usecs_to_ticks(usec);
- const unsigned long target = clk_to_systicks(ticks) + get_timer(0);
-
- reset_timer_masked();
+ const unsigned long target = get_ticks() + usecs_to_ticks(usec);
- while (get_timer_masked() < target)
+ while (get_ticks() < target)
/* noop */;
}
@@ -147,12 +130,11 @@ int timer_init(void)
/* use timer 3 with 508KHz and free running */
writel(TIMER_CLKSEL, &timer->timer3.control);
- /* auto load, manual update of Timer 3 */
- lastdec = TIMER_LOAD_VAL;
- writel(TIMER_LOAD_VAL, &timer->timer3.load);
+ /* set initial timer value 3 */
+ writel(TIMER_MAX_VAL, &timer->timer3.load);
- /* Enable the timer and periodic mode */
- writel(TIMER_ENABLE | TIMER_MODE | TIMER_CLKSEL,
+ /* Enable the timer */
+ writel(TIMER_ENABLE | TIMER_CLKSEL,
&timer->timer3.control);
reset_timer_masked();
--
1.6.5
next parent reply other threads:[~2010-02-23 23:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <7ee75976e78e2f82b4163fe1ff4233a850d4393c.1266966938.git.matthias@kaehlcke.net>
2010-02-23 23:22 ` Matthias Kaehlcke [this message]
2010-02-25 15:54 ` [U-Boot] [PATCH 2/2 rev2] ep93xx: Refactoring of timer code Tom
2010-02-25 18:15 ` Matthias Kaehlcke
2010-02-25 19:22 ` Alessandro Rubini
2010-02-25 19:47 ` Matthias Kaehlcke
2010-02-26 0:13 ` Tom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100223232209.GR20201@darwin \
--to=matthias@kaehlcke.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.