From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 01/14] Regulators: virtual - use sysfs attribute groups
Date: Tue, 23 Feb 2010 23:37:44 -0800 [thread overview]
Message-ID: <20100224073744.15964.93309.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100224073342.15964.8863.stgit@localhost.localdomain>
Instead of open-coding sysfs attribute group use canned solution.
Also add __devinit/__devexit markups for probe and remove methods
and use 'bool' where it makes sense.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/regulator/virtual.c | 64 ++++++++++++++++++++++---------------------
1 files changed, 33 insertions(+), 31 deletions(-)
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index addc032..d96ceca 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -19,7 +19,7 @@
struct virtual_consumer_data {
struct mutex lock;
struct regulator *regulator;
- int enabled;
+ bool enabled;
int min_uV;
int max_uV;
int min_uA;
@@ -49,7 +49,7 @@ static void update_voltage_constraints(struct device *dev,
dev_dbg(dev, "Enabling regulator\n");
ret = regulator_enable(data->regulator);
if (ret == 0)
- data->enabled = 1;
+ data->enabled = true;
else
dev_err(dev, "regulator_enable() failed: %d\n",
ret);
@@ -59,7 +59,7 @@ static void update_voltage_constraints(struct device *dev,
dev_dbg(dev, "Disabling regulator\n");
ret = regulator_disable(data->regulator);
if (ret == 0)
- data->enabled = 0;
+ data->enabled = false;
else
dev_err(dev, "regulator_disable() failed: %d\n",
ret);
@@ -89,7 +89,7 @@ static void update_current_limit_constraints(struct device *dev,
dev_dbg(dev, "Enabling regulator\n");
ret = regulator_enable(data->regulator);
if (ret == 0)
- data->enabled = 1;
+ data->enabled = true;
else
dev_err(dev, "regulator_enable() failed: %d\n",
ret);
@@ -99,7 +99,7 @@ static void update_current_limit_constraints(struct device *dev,
dev_dbg(dev, "Disabling regulator\n");
ret = regulator_disable(data->regulator);
if (ret == 0)
- data->enabled = 0;
+ data->enabled = false;
else
dev_err(dev, "regulator_disable() failed: %d\n",
ret);
@@ -270,24 +270,28 @@ static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA);
static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA);
static DEVICE_ATTR(mode, 0666, show_mode, set_mode);
-static struct device_attribute *attributes[] = {
- &dev_attr_min_microvolts,
- &dev_attr_max_microvolts,
- &dev_attr_min_microamps,
- &dev_attr_max_microamps,
- &dev_attr_mode,
+static struct attribute *regulator_virtual_attributes[] = {
+ &dev_attr_min_microvolts.attr,
+ &dev_attr_max_microvolts.attr,
+ &dev_attr_min_microamps.attr,
+ &dev_attr_max_microamps.attr,
+ &dev_attr_mode.attr,
+ NULL
};
-static int regulator_virtual_consumer_probe(struct platform_device *pdev)
+static const struct attribute_group regulator_virtual_attr_group = {
+ .attrs = regulator_virtual_attributes,
+};
+
+static int __devinit regulator_virtual_probe(struct platform_device *pdev)
{
char *reg_id = pdev->dev.platform_data;
struct virtual_consumer_data *drvdata;
- int ret, i;
+ int ret;
drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
- if (drvdata == NULL) {
+ if (drvdata == NULL)
return -ENOMEM;
- }
mutex_init(&drvdata->lock);
@@ -299,13 +303,12 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev)
goto err;
}
- for (i = 0; i < ARRAY_SIZE(attributes); i++) {
- ret = device_create_file(&pdev->dev, attributes[i]);
- if (ret != 0) {
- dev_err(&pdev->dev, "Failed to create attr %d: %d\n",
- i, ret);
- goto err_regulator;
- }
+ ret = sysfs_create_group(&pdev->dev.kobj,
+ ®ulator_virtual_attr_group);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to create attribute group: %d\n", ret);
+ goto err_regulator;
}
drvdata->mode = regulator_get_mode(drvdata->regulator);
@@ -317,37 +320,36 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev)
err_regulator:
regulator_put(drvdata->regulator);
err:
- for (i = 0; i < ARRAY_SIZE(attributes); i++)
- device_remove_file(&pdev->dev, attributes[i]);
kfree(drvdata);
return ret;
}
-static int regulator_virtual_consumer_remove(struct platform_device *pdev)
+static int __devexit regulator_virtual_remove(struct platform_device *pdev)
{
struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev);
- int i;
- for (i = 0; i < ARRAY_SIZE(attributes); i++)
- device_remove_file(&pdev->dev, attributes[i]);
+ sysfs_remove_group(&pdev->dev.kobj, ®ulator_virtual_attr_group);
+
if (drvdata->enabled)
regulator_disable(drvdata->regulator);
regulator_put(drvdata->regulator);
kfree(drvdata);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
static struct platform_driver regulator_virtual_consumer_driver = {
- .probe = regulator_virtual_consumer_probe,
- .remove = regulator_virtual_consumer_remove,
+ .probe = regulator_virtual_probe,
+ .remove = __devexit_p(regulator_virtual_remove),
.driver = {
.name = "reg-virt-consumer",
+ .owner = THIS_MODULE,
},
};
-
static int __init regulator_virtual_consumer_init(void)
{
return platform_driver_register(®ulator_virtual_consumer_driver);
next prev parent reply other threads:[~2010-02-24 7:37 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-24 7:37 [PATCH 00/14] Assorted small patches for regulators Dmitry Torokhov
2010-02-24 7:37 ` Dmitry Torokhov [this message]
2010-02-24 10:50 ` [PATCH 01/14] Regulators: virtual - use sysfs attribute groups Mark Brown
2010-02-25 10:35 ` Liam Girdwood
2010-02-24 7:37 ` [PATCH 02/14] Regulators: ab3100 - fix probe and remove annotations Dmitry Torokhov
2010-02-24 10:03 ` Mark Brown
2010-02-25 10:36 ` Liam Girdwood
2010-02-24 7:37 ` [PATCH 03/14] Regulators: fixed - annotate probe and remove methods Dmitry Torokhov
2010-02-24 10:43 ` Mark Brown
2010-02-25 10:36 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 04/14] Regulators: twl-regulator - mark probe function as __devinit Dmitry Torokhov
2010-02-24 10:05 ` Mark Brown
2010-02-25 10:36 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 05/14] Regulators: tps65023-regulator - mark probe method " Dmitry Torokhov
2010-02-24 11:31 ` Mark Brown
2010-02-25 10:37 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 06/14] Regulators: tps6507x-regulator " Dmitry Torokhov
2010-02-24 11:32 ` Mark Brown
2010-02-25 10:37 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 07/14] Regulators: lp3971 - fail if platform data was not supplied Dmitry Torokhov
2010-02-24 12:11 ` Mark Brown
2010-02-25 10:37 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 08/14] Regulators: max1586 - annotate probe and remove methods Dmitry Torokhov
2010-02-24 10:06 ` Mark Brown
2010-02-24 10:16 ` Dmitry Torokhov
2010-02-25 10:37 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 09/14] Regulators: max8660 " Dmitry Torokhov
2010-02-24 10:07 ` Mark Brown
2010-02-25 10:37 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 10/14] Regulators: pcap-regulator - clean up driver data after removal Dmitry Torokhov
2010-02-24 10:36 ` Mark Brown
2010-02-25 10:38 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 11/14] Regulators: wm831x-xxx " Dmitry Torokhov
2010-02-24 10:36 ` Mark Brown
2010-02-25 10:38 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 12/14] Regulators: wm8994 " Dmitry Torokhov
2010-02-24 10:20 ` Mark Brown
2010-02-25 10:39 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 13/14] Regulators: wm8400 - cleanup platform driver data handling Dmitry Torokhov
2010-02-24 10:25 ` Mark Brown
2010-02-24 19:02 ` Dmitry Torokhov
2010-02-24 19:14 ` Mark Brown
2010-02-24 19:21 ` Dmitry Torokhov
2010-02-24 20:40 ` Mark Brown
2010-02-25 9:55 ` Dmitry Torokhov
2010-02-25 10:43 ` Mark Brown
2010-02-25 11:02 ` Liam Girdwood
2010-02-24 7:38 ` [PATCH 14/14] Regulators: max8925-regulator - clean up driver data after removal Dmitry Torokhov
2010-02-24 10:28 ` Mark Brown
2010-02-25 10:39 ` Liam Girdwood
2010-02-24 10:03 ` [PATCH 00/14] Assorted small patches for regulators Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100224073744.15964.93309.stgit@localhost.localdomain \
--to=dmitry.torokhov@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.