From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: "linux-kernel" <linux-kernel@vger.kernel.org>,
Jens Axboe <jens.axboe@oracle.com>
Subject: Oops while booting 2.6.34-rc0 (block pull busted)
Date: Mon, 1 Mar 2010 16:15:30 -0800 [thread overview]
Message-ID: <201003011615.31709.dmitry.torokhov@gmail.com> (raw)
Hi,
It looks like block tree that has been pulled today into mainline is
busted, I am getting the Opps below on boot with the following commit:
commit b1bf9368407ae7e89d8a005bb40beb70a41df539
Merge: 524df55 4671a13
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon Mar 1 09:00:29 2010 -0800
Merge branch 'for-2.6.34' of git://git.kernel.dk/linux-2.6-block
but not with the previous one:
commit 524df55725217b13d5a232fb5badb5846418ea0e
Merge: 0f45339 6679ee1
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon Mar 1 08:58:44 2010 -0800
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
This is on plain Fedora 12 VM.
Thanks.
--
Dmitry
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Cache data unavailable
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Cache data unavailable
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 2:0:0:0: [sda] Cache data unavailable
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI disk
device-mapper: multipath: version 1.1.1 loaded
dracut: Scanning devices sda2 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "VolGroup" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "VolGroup" now active
EXT4-fs (dm-0): mounted filesystem with ordered data mode
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81128ee1>] mpage_end_io_read+0x45/0x6f
PGD 3b776067 PUD 3b7b1067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/kernel/uevent_seqnum
CPU 0
Modules linked in: dm_multipath mptspi mptscsih mptbase scsi_transport_spi floppy [last unloaded: scsi_wait_scan]
Pid: 1, comm: init Not tainted 2.6.33 #4 440BX Desktop Reference Platform/VMware Virtual Platform
RIP: 0010:[<ffffffff81128ee1>] [<ffffffff81128ee1>] mpage_end_io_read+0x45/0x6f
RSP: 0018:ffff88003ea957b8 EFLAGS: 00010202
RAX: ffffffff81128e9c RBX: ffff880037740dd0 RCX: 0000000000000000
RDX: ffff880037f9c088 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88003ea957d8 R08: 0000000000000000 R09: ffff880037e93c08
R10: 0000000000000001 R11: 0000000000000001 R12: ffff880037740d80
R13: 0000000000000001 R14: 0000000000000000 R15: ffff880037740d80
FS: 00007f7cde1ec700(0000) GS:ffff880001e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000003b79e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process init (pid: 1, threadinfo ffff88003ea94000, task ffff88003ea98000)
Stack:
ffff88003ea957e8 ffff880037fe9208 ffff880037f9c000 0000000000000000
<0> ffff88003ea957e8 ffffffff811246cd ffff88003ea95838 ffffffff81352f8c
<0> ffff88003ea95828 ffff88003b7072f8 ffff88003ea95838 ffff880037f9c000
Call Trace:
[<ffffffff811246cd>] bio_endio+0x2b/0x2d
[<ffffffff81352f8c>] dec_pending+0x13d/0x15c
[<ffffffff81353bd2>] __split_and_process_bio+0x510/0x52b
[<ffffffff81353f8c>] dm_request+0x1cd/0x1e0
[<ffffffff811eb999>] generic_make_request+0x23b/0x2b0
[<ffffffff81356c78>] ? linear_merge+0x0/0x5d
[<ffffffff813540bf>] ? dm_merge_bvec+0xcb/0xec
[<ffffffff811ebae0>] submit_bio+0xd2/0xef
[<ffffffff81128e25>] mpage_bio_submit+0x27/0x2b
[<ffffffff811293c6>] do_mpage_readpage+0x3e0/0x483
[<ffffffff810cb385>] ? ____pagevec_lru_add+0x138/0x14f
[<ffffffff81129590>] mpage_readpages+0xc5/0x104
[<ffffffff81175f53>] ? ext4_get_block+0x0/0xe9
[<ffffffff81175f53>] ? ext4_get_block+0x0/0xe9
[<ffffffff81173880>] ext4_readpages+0x1d/0x1f
[<ffffffff810ca855>] __do_page_cache_readahead+0x103/0x176
[<ffffffff8100a5ce>] ? apic_timer_interrupt+0xe/0x20
[<ffffffff810ca8e9>] ra_submit+0x21/0x25
[<ffffffff810cab55>] ondemand_readahead+0x18e/0x1a1
[<ffffffff810cac25>] page_cache_sync_readahead+0x1c/0x1e
[<ffffffff810c4209>] generic_file_aio_read+0x201/0x504
[<ffffffff81101625>] do_sync_read+0xc4/0x101
[<ffffffff81205803>] ? might_fault+0x21/0x23
[<ffffffff811c98f3>] ? selinux_file_permission+0x5c/0xb3
[<ffffffff811bfcfd>] ? security_file_permission+0x16/0x18
[<ffffffff81101c8c>] vfs_read+0xab/0x108
[<ffffffff81101da9>] sys_read+0x4a/0x6e
[<ffffffff81009c32>] system_call_fastpath+0x16/0x1b
Code: 49 89 fc 41 83 e5 01 48 ff cb 48 c1 e3 04 48 03 5f 48 48 8b 3b 48 83 eb 10 49 3b 5c 24 48 72 06 48 8b 03 0f 0d 08 45 85 ed 74 06 <3e> 80 0f 08 eb 08 3e 80 27 f7
3e 80 0f
RIP [<ffffffff81128ee1>] mpage_end_io_read+0x45/0x6f
RSP <ffff88003ea957b8>
CR2: 0000000000000000
---[ end trace ffacf7730488df2f ]---
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Tainted: G D 2.6.33 #4
Call Trace:
[<ffffffff8142fd51>] panic+0x7a/0x13d
[<ffffffff8105628b>] ? exit_ptrace+0x38/0x121
[<ffffffff8104f5b9>] do_exit+0x7a/0x6f3
[<ffffffff8104bfc9>] ? spin_unlock_irqrestore+0xe/0x10
[<ffffffff8104cbe2>] ? kmsg_dump+0x12b/0x145
[<ffffffff81432ff6>] oops_end+0xbf/0xc7
[<ffffffff8102f8f5>] no_context+0x1fc/0x20b
[<ffffffff8100f967>] ? nommu_map_sg+0xd1/0xe5
[<ffffffff8102fa88>] __bad_area_nosemaphore+0x184/0x1a7
[<ffffffff8100a5ce>] ? apic_timer_interrupt+0xe/0x20
[<ffffffff8102fb08>] __bad_area+0x48/0x4f
[<ffffffff81434aab>] ? do_page_fault+0x1bd/0x2a0
[<ffffffff8102fb22>] bad_area+0x13/0x15
[<ffffffff81434ab9>] do_page_fault+0x1cb/0x2a0
[<ffffffff81432475>] page_fault+0x25/0x30
[<ffffffff81128e9c>] ? mpage_end_io_read+0x0/0x6f
[<ffffffff81128ee1>] ? mpage_end_io_read+0x45/0x6f
[<ffffffff811246cd>] bio_endio+0x2b/0x2d
[<ffffffff81352f8c>] dec_pending+0x13d/0x15c
[<ffffffff81353bd2>] __split_and_process_bio+0x510/0x52b
[<ffffffff81353f8c>] dm_request+0x1cd/0x1e0
[<ffffffff811eb999>] generic_make_request+0x23b/0x2b0
[<ffffffff81356c78>] ? linear_merge+0x0/0x5d
[<ffffffff813540bf>] ? dm_merge_bvec+0xcb/0xec
[<ffffffff811ebae0>] submit_bio+0xd2/0xef
[<ffffffff81128e25>] mpage_bio_submit+0x27/0x2b
[<ffffffff811293c6>] do_mpage_readpage+0x3e0/0x483
[<ffffffff810cb385>] ? ____pagevec_lru_add+0x138/0x14f
[<ffffffff81129590>] mpage_readpages+0xc5/0x104
[<ffffffff81175f53>] ? ext4_get_block+0x0/0xe9
[<ffffffff81175f53>] ? ext4_get_block+0x0/0xe9
[<ffffffff81173880>] ext4_readpages+0x1d/0x1f
[<ffffffff810ca855>] __do_page_cache_readahead+0x103/0x176
[<ffffffff8100a5ce>] ? apic_timer_interrupt+0xe/0x20
[<ffffffff810ca8e9>] ra_submit+0x21/0x25
[<ffffffff810cab55>] ondemand_readahead+0x18e/0x1a1
[<ffffffff810cac25>] page_cache_sync_readahead+0x1c/0x1e
[<ffffffff810c4209>] generic_file_aio_read+0x201/0x504
[<ffffffff81101625>] do_sync_read+0xc4/0x101
[<ffffffff81205803>] ? might_fault+0x21/0x23
[<ffffffff811c98f3>] ? selinux_file_permission+0x5c/0xb3
[<ffffffff811bfcfd>] ? security_file_permission+0x16/0x18
[<ffffffff81101c8c>] vfs_read+0xab/0x108
[<ffffffff81101da9>] sys_read+0x4a/0x6e
[<ffffffff81009c32>] system_call_fastpath+0x16/0x1b
next reply other threads:[~2010-03-02 0:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-02 0:15 Dmitry Torokhov [this message]
2010-03-02 7:56 ` Oops while booting 2.6.34-rc0 (block pull busted) Jens Axboe
2010-03-02 8:15 ` Jens Axboe
2010-03-02 8:39 ` Jens Axboe
2010-03-02 9:35 ` Dmitry Torokhov
2010-03-02 22:51 ` Dmitry Torokhov
2010-03-03 7:31 ` Jens Axboe
2010-03-02 10:13 ` walt
2010-03-02 16:50 ` Michael Breuer
2010-03-02 17:42 ` Steven Rostedt
2010-03-02 17:49 ` Steven Rostedt
2010-03-02 18:21 ` [GIT PULL] single block IO revert (Was "Re: Oops while booting 2.6.34-rc0 (block pull busted)") Jens Axboe
2010-03-02 19:17 ` Steven Rostedt
2010-03-02 19:21 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201003011615.31709.dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.