Re: [lm-sensors] ASUS CUSL2: sensors work with 2.6.30,

[Roman Mamedov <roman@rm.pp.ru>]

[-- Attachment #1.1.1: Type: text/plain, Size: 1347 bytes --]

On Mon, 1 Mar 2010 13:55:48 +0100
Luca Tettamanti <kronos.it@gmail.com> wrote:

> On Mon, Mar 1, 2010 at 1:48 PM, Roman Mamedov <roman@rm.pp.ru> wrote:
> >> * The kernel log messages when cycling the i2c-i801 driver ("rmmod
> >>   i2c-i801 && modprobe i2c-i801" as root)
> >
> > There are no messages in dmesg or syslog when removing and reloading this
> > driver in 2.6.30, but in 2.6.33 there are errors:
> >
> > [  173.468108] ACPI: I/O resource 0000:00:1f.3 [0xe800-0xe80f] conflicts
> > with ACPI region SM00 [0xe800-0xe806]
> > [  173.468125] ACPI: If an ACPI driver is available for this device, you
> > should use it instead of the native driver
> 
> From ioports:
> e800-e80f : 0000:00:1f.3
>   e800-e80f : i801_smbus
> 
> So the ports used by i801_smbus are actually claimed by ACPI; 2.6.30
> did not enforce the reservation, .33 does.
> You might be able to use asus_atk0110 ACPI driver on your board;

If I understood you correctly:

# modprobe asus_atk0110
# lsmod | grep asus
asus_atk0110            9890  0 
# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

...this didn't seem to work.

> if it
> does not work please send me a copy of /sys/firmware/acpi/tables/DSDT,

Attached.

-- 
With respect,
Roman

[-- Attachment #1.1.2: DSDT.gz --]
[-- Type: application/x-gzip, Size: 4782 bytes --]

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors